Thanks for confirming that.
Posts by naszdom
-
-
In the Liveonsat listings they are showing a BBC HD Red Button frequency. Googling it confirms the BBC have used 12.422 H, 27.500, 2/3, DVB-S, QPSK for the World Cup and Wimbledon. However I cannot find anything on this frequency and it does not appear in my satellite.xml. Doing a blind scan I can find 12383 and 12442 but nothing in between.
I believe the HD frequency is probably something historical and Liveonsat just have not updated their data base. Does anyone know if there is a BBC Red Button frequency and if it is 12.422 any idea on why I cannot get it on my Zgemma H7 OpenATV 6.4.2 image.
I do have the SD Red Button
-
Yes that works - thanks
-
I have had problems getting my NC+ card NC+ seca. With someone’s help it is now working again. However, clines stopped working. I was getting the message:
(dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
My oscam.dvbapi file is (was):
P: 1813:000068
I: 0
One of the things I remember was the card was not working until that dvbapi file was created. Suddenly the card updated and everything on the card sprang into life. I have tried various configurations to make everything work with the dvbapi but with no joy. Adding Request Mode 0 or 1 does not work. Simply adding the contents of the dvbapi at [oscam] dvbapi, service, srvid, srvid2 just made everything stop.
However deactivating dvbapi by simply changing oscam.dvbapi to oscam.dvbapi.old made everything work including my card. I have no idea what dvbapi means or what its function is. It does not seem that necessary except I am worried that my card will not now update on 12 July. Is there any configuration I can use to make oscam ignore my dvbapi except for when reading cards.
-
-
-
Things have moved on a bit but I would still welcome your help.
As you will see from the attached I have actually got the card to update but I still have a blank screen. I do not know whether that is the oscam I am using or something to do with the caid confusion.
Why is the reader showing CAID 0100 for all types when my oscam.server shows caid = 1813?
I also attach my log fileb704de3c851.jpg
-
-
-
Thanks but I am not certain which one. Zgemma H7 is an armv 7 receiver. There are two which mention arm but not v 7. In each of the two there are 2 files. I have tried doing it with the method shown in the instructions but I cannot get any of the 4 to work. I don't know whether I have got the wrong files, I should have telneted them or whther I need to change my image from vix.
-
Thanks for the config files Tomek. I can follow them.
As I understand it. I need to replace Oscam. In the instructions it says go to sat-4-all and choose the newest one on the bottom. Well that might have been the case when it was written, but you are now spoilt for choice and I have no way of knowing which is the right one. (Zgemma H7 Vix image). The instructions seem to show Oscem-cycec 11584. There are a lot of Oscem-cycec files there, but they have moved on from 11584.
Alternatively I think you suggest using OSCam smod ( git+2188+db58dbb,Trunk r11581). I can find that at Github, but it consists of 15 folders and about 100 additional single files. I would not know where to begin. There is possibly something similar here Oscam Smod 11581, but I still would not know which one.
If ever I do fathom out the adapted oscam there then is the matter of NUID & CWPK. I have seen references to a "park" at sat-4-all s I think I can get hold of NUID & CWPK there. Is it then simply a matter of entering the details on the oscam.server?
Why is watching television legally so difficult but watching it illegally so easy?
This is interesting
-
NC+ used to be called Cyfra+ which was not the same as Cyfrowy Polsat. If you go to https://kos.hdsat.pl/menu-1.html you will see that there are
NC + 0100 NC + 0B01 and NC + (MIX). CAID 0100 is seca.
-
-
-
-
I have a NC+ card I believe commonly called Cameleon
I understand that from April 14 NC+ did something to stop these cards working in ECP Cam modules. Unfortunately it appears to have affected me.
I am using a Zgemma H& or a VU+ Zero both with OSCam r11572 and my oscam.server is as attached.
Is there any update or modification I can do to get the card working again
-
The card encoding is Viaccess.
-
The provider CSSat or Canal+ France. If you look at post #17 that is a configuration for an internal reader and it works. The time limit for a TNTsat card is 4 years.
-
This is from memory. About 3 years back when I was hunting around for Aeskeys etc I read that once initialised you should disable AU or your card would get fried. I do not how true this is. I do know that TNTsat V6 cards are destroyed within 5 minutes no matter what you do. However I have been running this card for the last 3 years in another receiver with audisabled = 1 withot any problems.
-
CI+ helper can be temperamental as you will see from Plugin CI+ Helper for OpenATV
I have a Fransat CI+ cam which I got running with a Vti image. With Openvix it does not want to know.
You will also find if you search around that there are horses for courses with some images working better on some boxes than others