Remotely not, sorry. Send me pm.
How to connect two card conax in one vps
- kira10
- Thread is marked as Resolved.
-
-
!???
-
Private message, just create conversation with me, via my profile for example.
-
You have pm from me.
-
oscam.conf card 2
[global]
disablelog = 1
logfile = /dev/null
clienttimeout = 8000
nice = -1
waitforcards = 0
readerrestartseconds = 1
[newcamd]
port = 34000@0B00:000000
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1
[cccam]
port = 36000
nodeid = 5DB6B29D107E1523
version = 2.0.11
oscam.conf card 1
[global]
disablelog = 1
logfile = /dev/null
clienttimeout = 8000
nice = -1
waitforcards = 0
readerrestartseconds = 1
[cache]
[newcamd]
port = 34000@0B00:000000
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1
[cccam]
port = 35000
nodeid = 5DB6B29D107E1524
version = 2.0.11
vps oscam
[reader]
label =card1
protocol = cccam
device = iconewegoo.ddns.net,35000
user = xxxxxxxxx
password = xxxxxxxxx
inactivitytimeout = 30
cacheex = 1
cacheex_maxhop = 1
caid = 0B00
ident = 0B00:000000
group = 1,2,3,4,5,6,7,8,9
emmcache = 2,3,2,0
cccversion = 2.0.11
ccckeepalive = 1
cccreshare = 1
[reader]
label = card2
protocol = cccam
device = iconewegoo.ddns.net,36000
user = xxxxxxxxxxxxxxx
password = xxxxxxxxxxxxxxxxx
inactivitytimeout = 30
cacheex = 1
cacheex_maxhop = 1
caid = 0B00
ident = 0B00:000000
group = 1,2,3,4,5,6,7,8,9
emmcache = 2,3,2,0
cccversion = 2.0.11
ccckeepalive = 1
cccreshare = 1
-
:hello:hello
-
Here is my simple How to:
Compiling oscam on Ubuntu is relatively easy. I use 18.04.1 LTS, but it also works on older and newer versions.
You must connect to a computer or server using telnet / ssh (use a small application called a putty). Select all lines at once and copy them to telnet (right-click on the cursor in telnet). The OS will start installing packages.
Codeapt-get install cvs subversion autoconf libccid automake libtool gettext make cmake tar bzip2 gzip patch ncurses-bin gcc g ++ flex bison pkg-config pcsc-tools pkg-config wget libpcsclite1 libpcsclite-dev libusb-dev libssl-dev libssnglite-dev pngquant zlib1g-dbg zlib1g-dev zlib1g zlibc dialog build-essential mercurial minizip
Install this package only if you have Smargo cardreader (there may be a newer version on the sourceforge server, please check first):
Codewget http://sourceforge.net/projects/libusb/files/libusb-1.0/libusb-1.0.8/libusb-1.0.8.tar.bz2 tar xjf libusb-1.0.8.tar.bz2 cd libusb-1.0.8 ./configure; make; make install
We are now ready for the next steps!
Codecd .. (you must go to the root directory of your system) svn checkout http://www.streamboard.tv/svn/oscam/trunk oscam-svn # you can also add: "-r xxxx" to the end to download a specific version of oscam. Very useful, especially if the newer version of OScam is not stable. cd oscam-svn mkdir build cd build cmake .. make make install # (this command will install oscam in the /usr/local/bin directory !! - if you already have an oscam binary there, make a backup of it)
Now you need to change the attributes of the oscam file to 0755. Use these commands:
You also need to set it to start automatically at boot time. Enter the following commands:
Write this line before the line "exit 0":
Press CTRL + C and confirm the changes with Y.
Now you need to create the oscam configuration files and transfer them to / usr / local / etc. You will also be able to use PSCS card readers (such as Omnikey) and Smargo!
thnx to OldSkul.
i got this error
root@xxxxxx : apt-get install cvs subversion autoconf libccid automake libtool gettext make cmake tar bzip2 gzip patch ncurses-bin gcc g ++ flex bison pkg-config pcsc-tools pkg-config wget libpcsclite1 libpcsclite-dev libusb-dev libssl-dev libssnglite-dev pngquant zlib1g-dbg zlib1g-dev zlib1g zlibc dialog build-essential mercurial minizip
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package g
E: Unable to locate package +
E: Regex compilation error - Invalid preceding regular expression
E: Couldn't find any package by regex '+'
E: Unable to locate package libssnglite-dev
-
Sorry there was a mistake: g ++, it's bad.
I've already fixed it, try it again. -
:hello:hello
-
[hide]
oscam.conf card 2
[global]
disablelog = 1
logfile = /dev/null
clienttimeout = 8000
nice = -1
waitforcards = 0
readerrestartseconds = 1
[newcamd]
port = 34000@0B00:000000
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1
[cccam]
port = 36000
nodeid = 5DB6B29D107E1523
version = 2.0.11
oscam.conf card 1
[global]
disablelog = 1
logfile = /dev/null
clienttimeout = 8000
nice = -1
waitforcards = 0
readerrestartseconds = 1
[cache]
[newcamd]
port = 34000@0B00:000000
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1
[cccam]
port = 35000
nodeid = 5DB6B29D107E1524
version = 2.0.11
vps oscam
[reader]
label =card1
protocol = cccam
device = iconewegoo.ddns.net,35000
user = xxxxxxxxx
password = xxxxxxxxx
inactivitytimeout = 30
cacheex = 1
cacheex_maxhop = 1
caid = 0B00
ident = 0B00:000000
group = 1,2,3,4,5,6,7,8,9
emmcache = 2,3,2,0
cccversion = 2.0.11
ccckeepalive = 1
cccreshare = 1
[reader]
label = card2
protocol = cccam
device = iconewegoo.ddns.net,36000
user = xxxxxxxxxxxxxxx
password = xxxxxxxxxxxxxxxxx
inactivitytimeout = 30
cacheex = 1
cacheex_maxhop = 1
caid = 0B00
ident = 0B00:000000
group = 1,2,3,4,5,6,7,8,9
emmcache = 2,3,2,0
cccversion = 2.0.11
ccckeepalive = 1
cccreshare = 1
-
Sorry there was a mistake: g ++, it's bad.
I've already fixed it, try it again.apt-get install cvs subversion autoconf libccid automake libtool gettext make cmake tar bzip2 gzip patch ncurses-bin gcc g++ flex bison pkg-config pcsc-tools pkg-config wget libpcsclite1 libpcsclite-dev libusb-dev libssl-dev libssnglite-dev pngquant zlib1g-dbg zlib1g-dev zlib1g zlibc dialog build-essential mercurial minizip
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package libssnglite-dev
-
Sorry there was another mistake by copying.
I've already fixed it, try it again.
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!