Hi, is this also ported to the Dreambox TWO?
Multi-Stalker plugin
-
- Multi-Stalker portal
- ziko
- Closed
- Thread is marked as Resolved.
-
-
Hi, is this also ported to the Dreambox TWO?
Дримо исправлено.
who has this command gives an error, we give the following commands and see what telnet writes to you .. I did this on the image of the PP
Since for some reason the flash-nrf52 package was not installed, we give another command
Codeapt-get autoremove ( this command is not mandatory for everyone, only if you had a similar situation like mine)
after a complete restart of the receiver
again, we give the cherished telnet command to install the plugin
Codewget -q "--no-check-certificate" https://raw.githubusercontent.com/ziko-ZR1/Multi-Stalker-install/main/Downloads/installer.sh -O - | /bin/ sh
opendreambox 2.5.0 дм900
dm900 логин: root
root @ dm900: ~ # wget -q "--no-check-certificate" https://raw.githubusercontent.…in/Downloads/installer.sh -O - | / bin / sh
У вас есть образ Python2
[Ваше устройство - armv7l]
########################################################################## #######
# MultiStalker 1.3 УСПЕШНО УСТАНОВЛЕН #
# Автор: ziko-ZR1 #
########################################################################## #######
# Перезапустить графический интерфейс Enigma2 #
########################################################################## #######
thank you so much for your help mic71
-
Hi, is this also ported to the Dreambox TWO?
what image do you use ? if the dream os then the answer was given to you in the post above if open pli or ATV then the installation will start with one command
-
Dear your plugin have probblem to load. (Unhandlet exeption) all the best.
the same problem
-
-
Scusa ma sul mio zgemma h2 questo software funziona?
si, provalo
did you follow the instructions in the first post, what was reported by the telnet session?
Scusa ma sul mio zgemma h2 questo software funziona?
si, provalo
did you follow the instructions in the first post, what was reported by the telnet session?
Sembra tutto ok ma.....
-
PR CO JE
-
is there a tool to sort stalker linuxsat txt lines out to put into box,im doing it one by one by the time i finish they are out of date,thanks
-
Scusa ma sul mio zgemma h2 questo software funziona?
si, provalo
did you follow the instructions in the first post, what was reported by the telnet session?
Scusa ma sul mio zgemma h2 questo software funziona?
si, provalo
did you follow the instructions in the first post, what was reported by the telnet session?
Sembra tutto ok ma.....
First of all, I congratulate Ziko for the plugin that works great on my 4k gigablue. On the zgemma star h2 instead it gives me the same error. Can anything be done about it? Thank you
-
how to use the two files multistalker1.3-py2 and multistalker1.3-py3
-
how to use the two files multistalker1.3-py2 and multistalker1.3-py3
so the plugin is universal py2 / py3, you install it with a command from telnet.this is the difference in the images that have switched to py3 open ATV and open droid
one team in telnet
-
How to solve a problem The file (stalker.conf) refuses to delete old portals even after restarting the GUI and restarting the receiver completely... The portals in it do not change and the old ones are preserved Where does he take the old portals?! Is there a solution, thanks?
-
Try to shut down receiver, and turn on again
-
How to solve a problem The file (stalker.conf) refuses to delete old portals even after restarting the GUI and restarting the receiver completely... The portals in it do not change and the old ones are preserved Where does he take the old portals?! Is there a solution, thanks?
Pls read Ziko's answer in #171 on this matter...
-
hi installed the plugin but I can not write mac addresses with only the remote control, there is no other writing method
-
hi installed the plugin but I can not write mac addresses with only the remote control, there is no other writing method
How about using PC.... The easiest way...
-
help me with a small PC guide
-
help me with a small PC guide
The file needed is in /home/stalker.conf. Put it it in yr PC and edit. Then put it back to yr receiver.
Read also Ziko's answer #171.
-
How to solve a problem The file (stalker.conf) refuses to delete old portals even after restarting the GUI and restarting the receiver completely... The portals in it do not change and the old ones are preserved Where does he take the old portals?! Is there a solution, thanks?
Hello tigrousad,
If there are spaces between the lines, delete them by editing the conf file on the device. If there are spaces or wrong lines, the update is not performed.
I made about 20 lines of copy past and the update didn't happen because there were spaces in the lines. I was able to do it by correcting as I mentioned above.
-
Wonderful plugin.
It would be great if you could add the possibility to save the Favorite channels in a dedicated folder
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!