hi people i need help , i have added boxnation & premier sports to my card but can't get them to open , i have tried umteen cfgs from here and other forums over the last week and have read a lot on here as well but to no avail , can someone give me some guidance on what the problem could be , all other channels open with my cfgs setup , nline in the cccam cfg to connect to oscam and i get all other chanels bar these 2 , i use cccam 2.2.1 on ubuntu server with oscam reading the card
thx peterd
have you received the entitlements to these channels after adding them? Easiest way is to put the card in your sly box, and see if you can get the channels. If Oscam is reading the card then you need to make sure you are not blocking out the services with oscam.services or by not defining the ecm length in your ecm whitelist, and another problem I have seen before is if you have defined your boxkey in oscam. Oscam detects this automatically so you don't need it defined - and I have known this to stop you unlocking the channel.
hi thx for reply , yes i have put the card in the ***box sevral times and all ok on the 2 channels , as i said i get the full package on the card no probs just the boxnation & premier sports dont clear , you say about the ecm length in the ecm whitelist , this i am not sure about , would it help if i post the oscam server/cfg/user files for you to have a look at
thx peterd
I am not using the same config as you - best if you post your configs - (make sure you *** out anything sensitive - read rule 8 on forum rules if you are not sure) - can recall others with similar problems that we managed to sort.
ok here is the setup
Unix starttime: 1338997505
Starttime: 06.06.12 16:45:05
Version: 1.20-unstable_svn Rev. 6480
Max PID: unlimited
Active modules:
Web interface support: yes
SSL support: no
DVB API support yes
DVB API with STAPI support: no
Anti-cascading support: yes
I***** guessing: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
LCD support: no
IPv6 support: no
Cache exchange support: yes
camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
Pandora: yes
gbox: yes
radegast: yes
serial: yes
constant CW: yes
Cardreader: yes
Nagra: yes
I*****: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
[global]
logfile = stdout
nice = -1
preferlocalcards = 1
saveinithistory = 1
cacheexenablestats = 1
[monitor]
hideclient_to = 15
appendchaninfo = 0
[newcamd]
port = 10000@0BAA:000000;20001@0963:000000
key = 0102030405060708091011121314
[cccam]
port = xxxxx
reshare = 2
version = 2.2.1
nodeid = xxxxxxxxxxxxxxxxxxx
[webif]
httpport = xxxxx
httpuser = xxxxx
httppwd = xxxxxxx
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
[account]
user = pass0
pwd = pass1
monlevel = 1
uniq = 2
group = 1,2
au = tring,***uk
[reader]
label = tring
protocol = mouse
device = /dev/ttyUSB7
pincode = 1234
caid = 0BAA
ident = 0BAA:000000
au = 1
ecmwhitelist = 0BAA:67,6C
detect = cd
cardmhz = 357
mhz = 357
group = 1
emmcache = 1,3,2
[reader]
label = ***uk
protocol = mouse
device = /dev/ttyUSB8
showcls = 0
caid = 0963
boxid =
detect = cd
ident = 0963:000000
group = 2
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
ndsversion = 2
ecmwhitelist = 0963:3E,42,44,45,47,4E,4F,53,54,61,62,67,68,69,6A,6B,6D,6F,71,72,73,77,78,79,7A,7C,7D,7E,80,8B
try deleting the lines I have highlighted in red (the reader entry for your sly card) then restart oscam/cccam
If this doesn't work, then please post your logs from the oscam webinfo from when you try to access the channel
[reader]
label = ***uk
protocol = mouse
device = /dev/ttyUSB8
showcls = 0
caid = 0963
[COLOR='#FF0000']boxid =[/COLOR]
detect = cd
ident = 0963:000000
group = 2
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
[COLOR='#FF0000']ndsversion = 2[/COLOR]
ecmwhitelist = 0963:3E,42,44,45,47,4E,4F,53,54,61,62,67,68,69,6A, 6B,6D,6F,71,72,73,77,78,79,7A,7C,7D,7E,80,8Bok i tried removing what you said ( in red ) but still the same here is what i get
2012/06/07 18:22:05 842D000 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
both channels are subscribed as i have put the card in the box over the last week and today and they both open
thx peterd
Try removing the ecm whitelist line from oscam.reader
Don’t have an account yet? Register yourself now and be a part of our community!
