Code
Hello to all,
first of all, congratulations for the forum and for the work you do. I have a strange situation on my SF8008 Combo decoder in practice both sat and dtt channels lagging or freezing and I am talking about almost all the channels on the line (some are blacked out). Many of these channels I would normally see in the clear. What can it depend on? The installed image on the decoder is Pure2 6.5. I have configured the DTT tuner as follows:
Tuner Type: DVB-C
Configuration: No connection
Force legacy signal settings: No
It must be said that I have tried them all.
For the SAT tuner these are the parameters used:
Configuration mode: Advanced
Satellite: Hot Bird 13.0E
LNB: LNB 1
Priority: Auto
LOF: Unicable
Unicable Config mode: Unicable LNB
Builder: Humax
Type: 150 SCR
Channel: SCR 1
Frequency: 1210
Connected: No
DiSEqC mode: None
What can it depend on? I would rule out signal problems as there was a Sky decoder in the same position (I use the same cable) and I have never had problems with the digital terrestrial channels of the TV.
Can you give me some advice? I'm fairly new on the subject.
Thanks in advance.Code
