then tell me how to build 12.2 for the following models
ixussone
ebox5100
raspberrypi3
azboxme
then tell me how to build 12.2 for the following models
ixussone
ebox5100
raspberrypi3
azboxme
then tell me how to build 12.2 for the following models
ixussone
ebox5100
raspberrypi3
azboxme
You mentioned some old models which OE-A removed in their recent versions so you need older OE-A to compile for those.
azboxme is available in OE-A 4.2 : https://github.com/oe-alliance….2/meta-brands/meta-azbox
ebox5100 is available in OE-A 4.3 : https://github.com/oe-alliance…4.3/meta-brands/meta-ebox
ixussone is available in OE-A 5.1 : https://github.com/oe-alliance….1/meta-brands/meta-ixuss
If you know git and how to work with OE/BitBake you can update older recipes to work with newer tools or just let go of old models and buy new STBs and enjoy faster images.
About raspberrypi you need to use https://github.com/agherzan/meta-raspberrypi but you should remember OV for RPi is not for daily usage as you can not watch any channels with it. OV for RPi is just for plugin development and we stopped using the newer kernels for it that's why we use kernel 5.15.x for it not the new kernel 6.1.x which https://github.com/raspberrypi use because we want to drop RPi support soon.
I wrote an example here: https://github.com/OpenVisionE2/ov-expansion#example
You could build for https://github.com/oe-alliance…-and-models--with-openatv list just like the example I mentioned.
work perfect
Did you test r535 from https://images.openvision.dedy…/Develop/Vision/Formuler/ ? And which image you tested formuler3 or formuler3ip?
CodeI tested both images, the result is the same - Enigma boots from a USB flash drive, but does not start, everything stops at 49%. OpenPLi, OpenATV, OpenSPA - loaded and started normally, without problems. OpenVision - does not start, freezes at 49% and therefore fails to use this image. You can Formuler F3 receiver - do not support, as it is ineffective ...
We don't have any formuler in our team so it's a blindspot for us but instead of giving up on it we could try to find the problem if you could provide us some logs: https://github.com/OpenVisionE…master/How-to-see-logs.md
Ok don't worry.
I'll provide you a new formuler3 image soon using OE-A to check if the problem is our kernel or our e2.
If it boots we understand a kernel configuration is wrong, if it won't boot we understand the problem is in our e2.
I hope we could fix this problem this week with your help.
Thanks a lot for your patience and cooperation :)
I am ready to be your tester and cooperate with you, since I have a Formuler F3 device and I would like to try the image of your team. Most of all I'm interested in images of py 3.11, and not the old ones - on py 2.7 ... Of course, I'm not a great specialist and not a programmer, so if I ask anything, but you tell me, please. Good luck!
CodeI am ready to be your tester and cooperate with you, since I have a Formuler F3 device and I would like to try the image of your team. Most of all I'm interested in images of py 3.11, and not the old ones - on py 2.7 ... Of course, I'm not a great specialist and not a programmer, so if I ask anything, but you tell me, please. Good luck!
Ok lets begin
This is a test image without anything extra: https://images.openvision.dedy…ormuler3-20230530_usb.zip
We just want to know what's the problem, kernel or e2 so above file should be enough.
The image is loaded into the receiver, but Enigma does not start, it still stops at 49%. It used to hang on the screensaver - OpenVision and 49% - on the scoreboard, now there is no screensaver, the scoreboard reaches (loading) up to 49% and disappears ...
The IP of the receiver is not defined in DCC. When manually prescribing - it does not connect.
Basically, nothing has changed for the better.
CodeThe image is loaded into the receiver, but Enigma does not start, it still stops at 49%. It used to hang on the screensaver - OpenVision and 49% - on the scoreboard, now there is no screensaver, the scoreboard reaches (loading) up to 49% and disappears ... The IP of the receiver is not defined in DCC. When manually prescribing - it does not connect. Basically, nothing has changed for the better.
Ok, at least now we know the kernel could be fine and we won't check that part as even with OE-A's kernel OV did not load on your box.
Now we could test different things in e2 and check which one could let the box load, try this test image: https://images.openvision.dedy…ormuler3-20230530_usb.zip
It takes time to debug the problem without logs and as you can not connect to your box I have to guess what could change the situation.
Once again thanks for your patience and cooperation.
I don't think drivers or kernel are the problem here because even with OE-A your box won't boot OV so we need to investigate e2 first.
Try this test image: https://images.openvision.dedy…ormuler3-20230531_usb.zip
Please give a me link to a working image (like OpenATV) which boots on your box.
Display Moreopenatv-7.3-formuler3-20230531_usb.zip
openatv-7.3-formuler3ip-20230530_usb.zip
openspa-8.1.002-formuler3-20230528_usb.zip
I checked OE-A images like ATV and we share the same driver only our kernel is different which is not the problem here as we checked compiling OV with OE-A and still the same results.
We're trying enigma2 fixes instead of driver changes (which is the same) in order to address your problem.
Try this image: https://images.openvision.dedy…ormuler3-20230531_usb.zip (name could be the same but e2 is different)
Try this image: https://images.openvision.dedy…ormuler3-20230531_usb.zip (name could be the same but e2 is different)
Try this image: https://images.openvision.dedy…ormuler3-20230531_usb.zip (name could be the same but e2 is different)
Ok try this one please: https://images.openvision.dedy…ormuler3-20230531_usb.zip
Good evening, I inform you that my Dreambox 920 4k, when looking for the channels, immediately restarts every time I look for the channels, something is wrong with this firmware, thank you, that you can correct it, thanks
openvision-e2-develop-py3.11-13.1-r540-dm920-20230531_usb
Good evening, I inform you that my Dreambox 920 4k, when looking for the channels, immediately restarts every time I look for the channels, something is wrong with this firmware, thank you, that you can correct it, thanks
openvision-e2-develop-py3.11-13.1-r540-dm920-20230531_usb
A crash log will be required
Don’t have an account yet? Register yourself now and be a part of our community!