HI someone can help me with ustym4k pro how to add cccam ,oscam in PK hyperyon 8 i search tutorial video and information but i not found for this receiver and how to flash usb with different image enigma open vix,pur e2 i tried but not work.
how to add cccam or oscam to PKT hyperion 8 on an ustym4k pro
- manul95
- Thread is marked as Resolved.
-
-
HI someone can help me with ustym4k pro how to add cccam ,oscam in PK hyperyon 8 i search tutorial video and information but i not found for this receiver and how to flash usb with different image enigma open vix,pur e2 i tried but not work.
Oscam,ncam, cccam emu and so on to: var/emu. Chmod 755.
Config files to: var/keys. That's it.
Have you tried this: How to flash uclan ustym 4k pro - Other Not Listed Enigma2 Linux HD Receivers - Linux Satellite Support Community (linuxsat-support.com)
-
Hi.
This procedure - https://www.enigma2.net/tutori…nstall-oscam-on-hyperion/ does not work for you ?
Or you can also install a separate Oscam binary. You download the binary for your chipset (mipsel, arm, aarch64, ...). It must be downloaded from a trusted source ! Oscam binaries and not IPK packages, you can also find it here on the discussion forum. Then just upload the Oscam binary file to the "/usr/bin/" folder and set the execute permissions (chmod 755 /path/to/file). Then upload my shell script https://github.com/s3n0/e2scripts/raw/master/softcam to the set-top box, the Linux startup "init.d" script, into the "/etc/init.d/" folder. You must also to set the execution rights, for this shell script. Everything else is described at the beginning of my shell script - in the comments.
-
Hi again how to add a cline oscam to image openvision11.2 on ustym 4k pro different softcam installed on receiver for example oscam s mod ,oscam emu n cam and oscam thank you .
-
Oscam is always the same. They are only xxxx-MOD, xxxx-EMU are only modifications (EMU is, for example, an extension of Software Card Reader + Emulator with a virtual decoder card).
If you want to convert CCcam configuration to Oscam, it's quite easy, just convert the data to "oscam.server":
How to setup Oscam.server on H 7 C box
Of course, for Oscam to work properly, basic settings are also needed and this is the "oscam.conf" and "oscam.user" files.
-
IM new what i have to do basic settings to work properly oscam conf and oscam user.
-
For more info check this page:
https://wiki.streamboard.tv/wiki/OSCam/en
IM new what i have to do basic settings to work properly oscam conf and oscam user.
Here is the basic / clean configuration for each one Oscam:
-
Hi.
This procedure - https://www.enigma2.net/tutori…nstall-oscam-on-hyperion/ does not work for you ?
Or you can also install a separate Oscam binary. You download the binary for your chipset (mipsel, arm, aarch64, ...). It must be downloaded from a trusted source ! Oscam binaries and not IPK packages, you can also find it here on the discussion forum. Then just upload the Oscam binary file to the "/usr/bin/" folder and set the execute permissions (chmod 755 /path/to/file). Then upload my shell script https://github.com/s3n0/e2scripts/raw/master/softcam to the set-top box, the Linux startup "init.d" script, into the "/etc/init.d/" folder. You must also to set the execution rights, for this shell script. Everything else is described at the beginning of my shell script - in the comments.
I am using pkteam 8.0 now on my Mut@nt HD51, and therefore know that the location you specify on * .bin and config does not match when it comes to pkteam image. You do not need a startup script in / etc / initd
# 2 is the correct location of * .bin and config, and no startup script.
There I have placed them and it works as intended.When I need to install oscam, for example, I download the latest ipk version.
Then I extract the .ipk file with 7-zip and then get access to the folders.There I find arm/mips/aarch emu and the latest config files, and start up script for the image that needs this.
Then just ftp them over. (Chmod 755)
-
But I don't know all the Enigma2 distributions in the world. Not at all Polish distributions Enigma2 :). I know only two of the most popular in Europe, namely: "OpenPLi" and "OpenATV".
In addition, I also referenced the URL where the procedure for properly installing softcams is given, according to the query (i.e. the procedure for the Enigma2 distribution called "Hyperion 8").
I do not instruct anyone to use the manual softcam installation method. However, it is a procedure written for Linux systems. This means that it must work in any set-top box that is based on the Linux system ! That is, regardless of the Enigma2 distribution used in the set-top box. The manual softcam installation method will work anytime, anywhere. In exceptional cases, users also need a GUI (SKIN) for Softcam. However, not every Enigma2 / GUI (SKIN) also has support for Softcam (for example, for restarting Softcam using the RCU, while watching TV).
-
But I don't know all the Enigma2 distributions in the world. Not at all Polish distributions Enigma2 :). I know only two of the most popular in Europe, namely: "OpenPLi" and "OpenATV".
In addition, I also referenced the URL where the procedure for properly installing softcams is given, according to the query (i.e. the procedure for the Enigma2 distribution called "Hyperion 8").
I do not instruct anyone to use the manual softcam installation method. However, it is a procedure written for Linux systems. This means that it must work in any set-top box that is based on the Linux system ! That is, regardless of the Enigma2 distribution used in the set-top box. The manual softcam installation method will work anytime, anywhere. In exceptional cases, users also need a GUI (SKIN) for Softcam. However, not every Enigma2 / GUI (SKIN) also has support for Softcam (for example, for restarting Softcam using the RCU, while watching TV).
The instruction is correct for most images, except Images from PKTeam.
They have their own solution as mentioned, but it is a solution that is simple and it works just as well as others.
-
But I don't know all the Enigma2 distributions in the world. Not at all Polish distributions Enigma2 :). I know only two of the most popular in Europe, namely: "OpenPLi" and "OpenATV".
In addition, I also referenced the URL where the procedure for properly installing softcams is given, according to the query (i.e. the procedure for the Enigma2 distribution called "Hyperion 8").
I do not instruct anyone to use the manual softcam installation method. However, it is a procedure written for Linux systems. This means that it must work in any set-top box that is based on the Linux system ! That is, regardless of the Enigma2 distribution used in the set-top box. The manual softcam installation method will work anytime, anywhere. In exceptional cases, users also need a GUI (SKIN) for Softcam. However, not every Enigma2 / GUI (SKIN) also has support for Softcam (for example, for restarting Softcam using the RCU, while watching TV).
The instruction is correct for most images, except Images from PKTeam.
They have their own solution as mentioned, but it is a solution that is simple and it works just as well as others.
I describe up to two installation methods in my "init.d" softcam script. The first method depends on OpenATV / OpenPLi. The second method is a universal procedure. This universal method must work on any Linux set-top box. It is based on the Linux system. It must work anytime, anywhere on Linux that uses "init.d" - and that means it should work on 99% of all Linux set-top boxes :).
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!