latest oscam for open blackhole - openbh

If you using OBH 5 read info here and download link is there as well :)

Oscam-emu for OBH v5.0

why not using the oscam-latest from feed? openbh 5.0 has now softcams menu visible

As reported by tud2007 softcams are available to download via the feeds so no need to go looking for IPK anymore.

Problem is that is does not work in Open Blackhole 5 but it dose in OpenVix.

Im trying to figure out problem, Im uisng OSCAM (1.20+SVN11704-r1)

I looked at the log files and says it cant find reader, but its all there?

These are the results im getting under Open Blackhole5:

I cannot clear channels or connect to oscam webinf using ip and port

I can only connect to oscam webinf juit by ip alone . its not asking for user name or pass.

The provider has given me the necessary files for testing and connecting and for some reason they think my box is not connecting to their server?

These are my log files :

2022/04/06 21:21:15 00000000 s (main) System name = Linux

2022/04/06 21:21:15 00000000 s (main) Host name = vuuno4kse

2022/04/06 21:21:15 00000000 s (main) Release = 4.1.20-1.9

2022/04/06 21:21:15 00000000 s (main) Version = #1 SMP Sun Jan 30 02:02:31 UTC 2022

2022/04/06 21:21:15 00000000 s (main) Machine = armv7l

2022/04/06 21:21:15 00000000 s (main) Stb model = dm8000

2022/04/06 21:21:15 00000000 s (main) Stb vumodel = vuuno4kse

2022/04/06 21:21:15 00000000 s (main) Stb boxtype = vuuno4kse

2022/04/06 21:21:15 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1703

2022/04/06 21:21:15 00000000 s (main) signal handling initialized

2022/04/06 21:21:15 00000000 s (led) LED support is not active. Can't detect machine type.

2022/04/06 21:21:15 00000000 s (main) waiting for local card init

2022/04/06 21:21:15 00F08898 h (webif) webif: decompressed 172519 bytes back into 418240 bytes

2022/04/06 21:21:15 00F08898 h (webif) HTTP Server running. ip=:: port=83

2022/04/06 21:21:15 00000000 s (main) init for all local cards done

2022/04/06 21:21:15 00000000 s (emmcache) loading emmcache disabled since no reader is using it!

2022/04/06 21:21:15 00000000 s (emmcache) loading emmstats disabled since no reader is using it!

2022/04/06 21:21:15 00000000 s (gbox) local gbox failed init

2022/04/06 21:21:15 5A1DA0B3 c (client) plain dvbapi-client granted (anonymous, au=off)

2022/04/06 21:21:15 5A1DA0B3 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-latest/oscam.ccache

2022/04/06 21:21:15 5A1DA0B3 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum number of filters is 64 (oscam limit is 64)

My oscam.conf file

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11516

# Read more: http://www.streamboard.tv/svn/…on/doc/txt/oscam.conf.txt

[global]

logfile = /dev/null

clienttimeout = 6000

nice = -1

waitforcards_extra_delay = 60

preferlocalcards = 2

disablecrccws = 1

[cache]

[dvbapi]

enabled = 1

au = 1

pmt_mode = 1

request_mode = 1

delayer = 70

ecminfo_type = 4

user = localuser

read_sdt = 1

write_sdt_prov = 1

boxtype = dreambox

[webif]

httpport = 9999

httpuser = admin

httppwd = admin

httprefresh = 10

httppollrefresh = 10

httpallowed = 192.168.0.0-255.255.255.255

my oscam.dvbapi

P: 098D:000000

P: 1884:000000

My oscam.server ( personnel details crossed out and I used the oscam convertor)

[reader]

label=test.fcnoip.org

enable=1

protocol=cccam

device=test.xxxxx.org,xxxxx

user=xxxxxxx

password=xxxxxxxx

cccversion=2.1.2

group=1

inactivitytimeout=1

reconnecttimeout=30

lb_weight=100

cccmaxhops=10

ccckeepalive=1

cccwantemu=0

I have no managed to get oscam webinf working by typing ip+port

Below is the live log

Is the problem to do with user/password, would have thought the conversion app deals with that?

Quote from master G

Quote from ALIEN1X

Is the problem to do with user/password, would have thought the conversion app deals with that?

The log states the user/pass is wrong which is why its not connecting to the server.

i Checked on oscam.server file the user name and pass is correct?

in the oscam.conf file which I downloaded form here part of it says the following:

[dvbapi]

enabled = 1

au = 1

pmt_mode = 0

request_mode = 1

user = Receiver

read_sdt = 2

boxtype = dreambox

dose it mean my user name also goes here too in the section user=

and the same for oscam.user below too?

[account]

user = Receiver

au = 1

group = 1

Ass fr any password , i cant figure out where that has gone wrong?

I checked again,

Quote from master G

Quote from ALIEN1X

in the oscam.conf file which I downloaded form here part of it says the following:

[dvbapi]

enabled = 1

au = 1

pmt_mode = 0

request_mode = 1

user = Receiver

read_sdt = 2

boxtype = dreambox

dose it mean my user name also goes here too in the section user=

and the same for oscam.user below too?

[account]

user = Receiver

au = 1

group = 1

Ass fr any password , i cant figure out where that has gone wrong?

Display More

The log clearly shows there is a problem with the credentials used to connect to that server.

The configuration for this is in oscam.server, nowhere else, it has nothing to do with the user/account in oscam.conf or oscam.user

Display More

part of the oscam version log says this:

Unix starttime: 1649628058

Starttime: 10.04.2022 23:00:58

Version: oscam-1.20_svn-r11704

Compiler: arm-oe-linux-gnueabi

Box type: vuuno4kse (generic)

PID: 1663

TempDir: /tmp/.oscam

GBox tmp_dir: not defined using: /tmp/.oscam

ConfigDir: /etc/tuxbox/config/oscam-latest/

WebifPort: 5115

And the the live log errors says this ( crossed out personell info):

2022/04/10 23:23:31 02EB8A5B p (-) -- Skipped 2 duplicated log lines --(cccam) cccam(r) xx.xxxxxxxxx.com: login failed, usr/pwd invalid2022/04/10 23:25:56 42C3C243 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

oscam.server I have this:

[reader]
label=xx.xxxxxxxx.com

enable=1

protocol=cccam

device=xx.xxxxxxx.com,xxxxx

user=xxxxxxxx

password=xxxxxxxxx

cccversion=2.1.2

group=1

inactivitytimeout=1

reconnecttimeout=30

lb_weight=100

cccmaxhops=10

ccckeepalive=1

cccwantemu=0

Configs are sent to etc/tubox/config/latest oscam

on other images like openvix its sent to etc/tubox/config

But in Open Blackhole5 which Im trying to setup and use its etc/tubox/config/latest oscam

thats what i was told in the OPen Blackhole forums?

my port under oscam.conf file is 5115 which is what i use to enter webinif

thats based on the files you sent me to download

Quote from master G

If the configs are in the correct directory and you have also double checked it via the webinterface > files, then the login details for the server are a problem. Contact whoever you got them from, show them your reader and the log where its fails because of user/pass and ask for new credentials.

I wish i had another solution but we have tried everything.

Thanks for your help. I did contact tech support previously and beacuse it worked under Openvix and not Open Blackhole 5 they were clueless and could not advise.

This kind of gives me an impression that there is somthing wrong with Open Blackhole 5 and I tried asking that forum but no one had a clue and not many replies as much as I have had here.

At least I learnt somthing

Just like to say I got it woking, i was using the wrong oscam version that works with openblack hole 5 and thre is a specificway to install it via telent.

The version I should have used is oscam 11704-r798.

For anyone using Open Blackhole5 and want to use OSCAM

This is the way to do it:

If using a pc/laptop make sure you have putty or similar software that can connect via telent.

Connect to your enigma2 box via telnet by using your reciever username and pass that yu use to connect to your box

enter the following telnet command :

wget https://raw.githubusercontent.com/MOHAMED19OS/Download/main/Oscam_Ncam/installer.sh -q; sh installer.sh; rm -rf installer.sh

You will then be asked which softcam should be installed - select option 1 Oscam then press enter

installation will take place and box should reboot

Then put your OSCAM config files in etc/tubox/config folder

reboot your box then press blue button and select oscam 11704-r798

then hold your breath (should be working now)

Many thanks to antepenutim8 for helping. again its a learning curve for me