Airdigital Zgemma H7 OpenBh 5.1
It's not official
All my files for testing purposes only.
Please do not ask for anything through pm.
do you find everything you are looking for on the site?
Download: openbh-5.1.001.release-zgemmah7_usb.zip
Greetings
There are 22 replies in this Thread which was already clicked 2,321 times. The last Post () by attila24nagy.
Airdigital Zgemma H7 OpenBh 5.1
It's not official
All my files for testing purposes only.
Please do not ask for anything through pm.
do you find everything you are looking for on the site?
Download: openbh-5.1.001.release-zgemmah7_usb.zip
Greetings
Is multiboot this image dear? Thanks.
Is multiboot this image dear? Thanks.
Ok you want the recovery of this image
yes
Hello and thanks,
how should i install it?
Can I follow the normal procedure using a USB flash drive?
非常流畅,没有插件馈送,安装软摄像机后,其他插件无法安装,错误报告为缺少库
非常流畅,没有插件馈送,安装软摄像机后,其他插件无法安装,错误报告为缺少库
正如您已经在上面阅读的那样,这是我的创作 如果你必须添加一些东西,你必须自己放
Please write in english
Hello and thanks,
how should i install it?
Can I follow the normal procedure using a USB flash drive?
yes
Hello and thanks,
how should i install it?
Can I follow the normal procedure using a USB flash drive?
yes
hi, i can't install it.
I copy the zgemma folder on a pendrive, insert it in the decoder with the usual procedure, but the flash does not start.
remains stationary on boot
Display MoreHello and thanks,
how should i install it?
Can I follow the normal procedure using a USB flash drive?
yes
hi, i can't install it.
I copy the zgemma folder on a pendrive, insert it in the decoder with the usual procedure, but the flash does not start.
remains stationary on boot
HI
surely you do not do the correct procedure
Hi
luppetone have you only got one image on the box at the moment? And you cant flash that box from a USB once it is set up. In fact you may brick the box. What image have you on box at the moment?
I have same box with 4 images but not openbh.
yes
Hi @remax96
I'm sorry to hear from you but on the site
you can find everything just search find here:RE: Transfer Key File
Iinstall whatever you want send this command
by telnet
1 wget -O - -q http://updates.mynonpublic.com/oea/feed | bash && opkg update && opkg install enigma2-plugin-softcams-oscam-stable
Just read on the site you will find everything ready food after a tired it is unresponsive
Hello master pippomus, thank you for your help yesterday, and finally do a good job of subscribing to the source, very smooth and excellent, thank you. The modified source file is attached below, unzip it and put it in etc.
ae6e0c75cd6d3b72229759a06.png3cdc632136f.png3cdc632136f.png3f99b3.png
Display MoreHi @remax96
I'm sorry to hear from you but on the site
you can find everything just search find here:RE: Transfer Key File
Iinstall whatever you want send this commandby telnet
1 wget -O - -q http://updates.mynonpublic.com/oea/feed | bash && opkg update && opkg install enigma2-plugin-softcams-oscam-stable
Just read on the site you will find everything ready food after a tired it is unresponsive
Display More
Display MoreHello and thanks,
how should i install it?
Can I follow the normal procedure using a USB flash drive?
yes
hi, i can't install it.
I copy the zgemma folder on a pendrive, insert it in the decoder with the usual procedure, but the flash does not start.
remains stationary on boot
HI
surely you do not do the correct procedure
hello, thanks for the answer, I specify that I currently only have the openpli 8.1 firmware installed (without multiboot).
The procedure I perform is the same to load the original firmware (openpli, openatv, etc).
I noticed one thing: in the zgemma folder of the original openpli firmware (which I copy on the USB pendrive), there are 2 files (disk - imageversion).
While in the zgemma folder of the openbh-5.1.001.release-zgemmah7_usb firmware (which I copy on the usb pen drive), there are 3 files (imageversion - kernel.bin - rootfs.tar).
In my opinion it is for this reason that the normal flash does not start and remains on the boot.
Display MoreDisplay More
Display MoreHello and thanks,
how should i install it?
Can I follow the normal procedure using a USB flash drive?
yes
hi, i can't install it.
I copy the zgemma folder on a pendrive, insert it in the decoder with the usual procedure, but the flash does not start.
remains stationary on boot
HI
surely you do not do the correct procedure
hello, thanks for the answer, I specify that I currently only have the openpli 8.1 firmware installed (without multiboot).
The procedure I perform is the same to load the original firmware (openpli, openatv, etc).
I noticed one thing: in the zgemma folder of the original openpli firmware (which I copy on the USB pendrive), there are 2 files (disk - imageversion).
While in the zgemma folder of the openbh-5.1.001.release-zgemmah7_usb firmware (which I copy on the usb pen drive), there are 3 files (imageversion - kernel.bin - rootfs.tar).
In my opinion it is for this reason that the normal flash does not start and remains on the boot.
probably to load the openbh-5.1.001.release-zgemmah7_usb firmware, you need to do another procedure and not the usual one to load the original firmware
If your stuck on boot you will probably have to use the recovery image...also as far as I understood things some images have to be installed on the root partition (slot 1)...for example I have Pure2 image in slot 1 but cant install this image (OpenBH) into slot 2 because of the limititation above
Display MoreDisplay MoreDisplay More
Display MoreHello and thanks,
how should i install it?
Can I follow the normal procedure using a USB flash drive?
yes
hi, i can't install it.
I copy the zgemma folder on a pendrive, insert it in the decoder with the usual procedure, but the flash does not start.
remains stationary on boot
HI
surely you do not do the correct procedure
hello, thanks for the answer, I specify that I currently only have the openpli 8.1 firmware installed (without multiboot).
The procedure I perform is the same to load the original firmware (openpli, openatv, etc).
I noticed one thing: in the zgemma folder of the original openpli firmware (which I copy on the USB pendrive), there are 2 files (disk - imageversion).
While in the zgemma folder of the openbh-5.1.001.release-zgemmah7_usb firmware (which I copy on the usb pen drive), there are 3 files (imageversion - kernel.bin - rootfs.tar).
In my opinion it is for this reason that the normal flash does not start and remains on the boot.
probably to load the openbh-5.1.001.release-zgemmah7_usb firmware, you need to do another procedure and not the usual one to load the original firmware
Ok lupettone2003
There he is :https://mega.nz/file/t15nEagI#…DZPwEbuTkJJ-O3J4rvy07EGxo
explain better next time
Don’t have an account yet? Register yourself now and be a part of our community!