with openpli 9 on zgemma h7s the ncam 14.2 works very well (web interface opens) while on zgemma h8.2h I confirm that it doesn't work.
can something be done for the zgemma h8.2h (web interface does not open)
with openpli 9 on zgemma h7s the ncam 14.2 works very well (web interface opens) while on zgemma h8.2h I confirm that it doesn't work.
can something be done for the zgemma h8.2h (web interface does not open)
qual è il file ipk da utilizzare?
Non esiste una versione specifica per zgemma. ipk del primo post supporta tutti i dispositivi enigma2.
La procedura di installazione è la stessa per qualsiasi file .ipk.
Buonasera installata su zgemma h8.2h ma non apre i canali ......provata con vari firmware (openpli 9 - openpli 8.3 - egami e openatv 7.3) .
Good evening, installed on zgemma h8.2h but it doesn't open the channels......tested with various firmwares (openpli 9 - openpli 8.3 - egami and openatv 7.3).
con openpli 9 su zgemma h7s la ncam 14.2 funziona molto bene (interfaccia web si apre) mentre su zgemma h8.2h confermo che non funziona .
si puo fare qualcosa per lo zgemma h8.2h (interfaccia web non si apre)
with openpli 9 on zgemma h7s the ncam 14.2 works very well (web interface opens) while on zgemma h8.2h I confirm that it doesn't work.
can something be done for the zgemma h8.2h (web interface does not open)
Display More
thanks...I didn't understand....can you kindly explain better? address my zgemma is 192.168.1.56
thanks...but it's not 8181.
Where can I find it from?
Good evening, installed on zgemma h8.2h but it doesn't open the channels..
Can you access the web interface?
how do you access it?
qual è il file ipk da utilizzare?
Non esiste una versione specifica per zgemma. ipk del primo post supporta tutti i dispositivi enigma2.
La procedura di installazione è la stessa per qualsiasi file .ipk.
Buonasera installata su zgemma h8.2h ma non apre i canali ......provata con vari firmware (openpli 9 - openpli 8.3 - egami e openatv 7.3) .
Good evening, installed on zgemma h8.2h but it doesn't open the channels......tested with various firmwares (openpli 9 - openpli 8.3 - egami and openatv 7.3).
Good evening, sorry for my trivial question: on my zgemma h8.2h which version of ncam should I install?
what is the ipk file to use?
Do I have to do any special procedures to make it work?
Thank you
atv8 works badly that's why there is Goto atv7
hi, I have an Axas His 4K Combo Plus can you tell me if there is a guide to go back to Android 7?
Thank you
Good morning, I have an AXAS HIS 4k+ and the side USB ports don't work. I had read somewhere that you can update the firmware via FTP and telnet.
Does anyone remember the procedure?
Thank you
Display MoreOPENDROID 7.1 Python 3 Zgemma H7
22.09.20211
https://mega.nz/file/BxwQGKCL#…adTocQsIlmbSYvr2UTFQtYAAA
https://mega.nz/file/x9pCwATA#…WcSIXVTc2dp020GMWlMEvOuTM
Greetings and have fun
Does anyone have this image in their archive and can post it?
Thank you
Good evening, I can't find and download the opendroid 7.1 image for zgemma H7.
If anyone has it on file, can you post it?
Thank you
i test on openpli 8.3
not open
i use it on opli 8.3 and work perfectly -- zero4k,
are it work with you on oscam, make sure your setting is ok -- and ncam config have right stream relay values
I'm sorry, tell me something: but you have to load a special channel list (sky de) or is the astra satellite channel list okay?
thank you
Hi everyone, which file should I use for my ZGEMMA H7 - openpli 8.1?
thank you
Display MoreDisplay More
Display MoreHello and thanks,
how should i install it?
Can I follow the normal procedure using a USB flash drive?
yes
hi, i can't install it.
I copy the zgemma folder on a pendrive, insert it in the decoder with the usual procedure, but the flash does not start.
remains stationary on boot
HI
surely you do not do the correct procedure
hello, thanks for the answer, I specify that I currently only have the openpli 8.1 firmware installed (without multiboot).
The procedure I perform is the same to load the original firmware (openpli, openatv, etc).
I noticed one thing: in the zgemma folder of the original openpli firmware (which I copy on the USB pendrive), there are 2 files (disk - imageversion).
While in the zgemma folder of the openbh-5.1.001.release-zgemmah7_usb firmware (which I copy on the usb pen drive), there are 3 files (imageversion - kernel.bin - rootfs.tar).
In my opinion it is for this reason that the normal flash does not start and remains on the boot.
probably to load the openbh-5.1.001.release-zgemmah7_usb firmware, you need to do another procedure and not the usual one to load the original firmware
Display More
Display MoreHello and thanks,
how should i install it?
Can I follow the normal procedure using a USB flash drive?
yes
hi, i can't install it.
I copy the zgemma folder on a pendrive, insert it in the decoder with the usual procedure, but the flash does not start.
remains stationary on boot
HI
surely you do not do the correct procedure
hello, thanks for the answer, I specify that I currently only have the openpli 8.1 firmware installed (without multiboot).
The procedure I perform is the same to load the original firmware (openpli, openatv, etc).
I noticed one thing: in the zgemma folder of the original openpli firmware (which I copy on the USB pendrive), there are 2 files (disk - imageversion).
While in the zgemma folder of the openbh-5.1.001.release-zgemmah7_usb firmware (which I copy on the usb pen drive), there are 3 files (imageversion - kernel.bin - rootfs.tar).
In my opinion it is for this reason that the normal flash does not start and remains on the boot.
Hello and thanks,
how should i install it?
Can I follow the normal procedure using a USB flash drive?
yes
hi, i can't install it.
I copy the zgemma folder on a pendrive, insert it in the decoder with the usual procedure, but the flash does not start.
remains stationary on boot
Hello and thanks,
how should i install it?
Can I follow the normal procedure using a USB flash drive?
hello, I wanted to report this:
if, as I wish, I choose the option to change channels with up and down arrows, this creates a problem: when I press the up arrow or the down arrow, the channel list always opens.
Can you arrange and make sure that when you press the up arrow you do not open the channel list but only change the channel?
thank you
softcam-feed-opd_7.0
i can't install the file on latest firmware opendroid decoder hitube 4k,
How can I do to install the feeds on opendroid ?
thanks
after installing the file softcam-feed-opd_7.0.ipk , I can't find the cams in the plugins !
What mistake do I make?
thanks
softcam-feed-opd_7.0
i can't install the file on latest firmware opendroid decoder hitube 4k,
How can I do to install the feeds on opendroid ?
thanks