[Samur Private OSCam] - Request for compilation, questions and help !!!

There are 1,475 replies in this Thread which was already clicked 439,409 times. The last Post () by samur.

    You are absolutely right, excuse me, I tested lots of different versions to make my 1814 card work (I have all the data) I got confused, I just tested your latest version and it launches perfectly ; )

    thanks for your work

    For almost 99% of time i'm right ...

    Here is the correct config which works only with my oscam :

    ( RE: Samur's OSCam - Request for compilation, questions and help !!! )

    ####

    1814 is it working in Global mode Or Unique mode ?

    i thinks is global mode, i used a big parts of your setting on this post


    [reader]

    label = Meo

    protocol = pcsc

    device = 0

    services = !dont_have

    cacheex_block_fakecws = 1

    caid = 1814

    boxkey = xxx

    rsakey = xxx

    mod1 = 91Cxxx

    mod2 = 889xxx

    key3588 = xxx

    key3460 = xxx

    key3310 = xxx

    data50 = B67xxx

    mod50 = DB9xxx

    idird = xxx

    cmd0eprov = 5211

    nuid = xxx

    cwekey = xxx

    detect = cd

    nagra_read = 1

    detect_seca_nagra_tunneled_card= 2

    mhz = 369

    cardmhz = 369

    ident = 1814:005211,000000

    group = 1

    emmcache = 1,1,2,0

    blockemm-unknown = 1

    lb_weight = 100

    audisabled = 1

    auprovid = 005221

    Quote from djkage

    i thinks is global mode, i used a big parts of your setting on this post

    Here is the config for the Global mode:

    ;

    Quote from djkage

    I have to switch the card to unique mode later?

    You said that you have all your DATA then do not care about if it's Global Or Unique

    use this config without boxkey and rsakey:

    Do you have 'nuid' and 'cwpk' ?

    ;

    Samur! please HELP


    I have a problem with AU new card Irdeto caid 0642 (au provid 000700). I used dvb-s2 box c-sky linux for GX6605H1 and new OSCAM version.

    Problem - not AU for new CARD.


    I want communicate with you private, I have Telegram, Skype.

    Sorry, i don't want communicate ...

    ###

    You are like having a rocket to send to the moon ...


    Thanks,

    Hello, i try to help a friend with his card, so to resume i have my 1814 card with basic channels and all data (NUID + cpwk) my card works perfectly with your bin 11778-801, after check this morning, my card work on unique mode

    my friend have 1814 card basic + sport but not all data (nuid and cpwk are missing) and today no way to make it works correctly, on global mode i can't start correctly and on unique mode (without nuid/cwpk) his card start good but don't open nothing : not found ( i know without nuid+cwpk 6A don't open but basic normally yes)

    i was thinking for bad data but no, all data are OK i found à soft to open his original dump and all data are good, i tried his card on my oscam (same oscam with both cards) and same problems, i tried a lot of settings (global/unique, ...) but none works

    maybee have you a clue?


    thanks for your help ;)

    Възможно ли е да изтеглите и инсталирате готов oscam ikam, който ще работи на zgemma H11s с openatv 7.4 Благодаря ...

    Is it possible to download and install a ready-made oscam ikam that will work on a zgemma H11s with openatv 7.4 Thanks...

    Edited once, last by master G: Merged a post created by Vencislav2699 into this post. ().

    • Official Post
    Quote from Vencislav2699

    Is it possible to download and install a ready-made oscam ikam that will work on a zgemma H11s with openatv 7.4 Thanks...

    You can install the secret feeds and then install oscam. Please note Icam functionality has been in plain oscam for several months, so no need to look for an Icam specific version.

Your resource for OSCam-EMU softcam

Find configs, downloads, tutorials, and support for emulation setup, IPTV decoding, and extended protocol support. Master emulation and extended decoding with OSCam-EMU. Access dedicated support, configs, tutorials, and downloads for enhanced IPTV and service access.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login