[Samur Private OSCam] - Request for compilation, questions and help !!!

There are 1,475 replies in this Thread which was already clicked 438,363 times. The last Post () by samur.

    Quote from djkage

    hello, after try to add ecmheader = 0, my friend's card work like a charm :smiling face:

    So, now, Meo starts to harden the encryption system as the way of CSAT(1811) ...etc

    '1811' is not working with the public oscam and maybe also '1814' will join the '1811'

    in terms of countermeasures.


    ;

    Quote from samur

    So, now, Meo starts to harden the encryption system as the way of CSAT(1811) ...etc

    '1811' is not working with the public oscam and maybe also '1814' will join the '1811'

    in terms of countermeasures.

    I'm sure those "thugs" also read through the forums and try to do something counteroffensive, isn't it?

    not all cards have the same reader configuration, mine, newer, all white, does not use "ecmheader = 0" but my friends' card (which is older and is red and white) did not want to work without adding "ecmheader = 0"

    Quote from djkage

    not all cards have the same reader configuration, mine, newer, all white, does not use "ecmheader = 0" but my friends' card (which is older and is red and white) did not want to work without adding "ecmheader = 0"

    Yes, for almost same thing with french cards '1811'

    There are 1811 cards for france and also there are 1811 cards for Switzerland


    0x04: for france 1811 ecmheader = 4

    0x00: for Switzerland 1811 ecmheader = 0


    ;

    Hello, managers and dear friends, I had a question. I have a Dreambox 7020 HD that has Open pli 12.3 Image installed on it. Now, I wanted to know whether I should use emulators with the extension deb or emulators with the extension ipk among the OSK emulators. Thank you for your guidance.

    Edited once, last by 1z1z ().

    Quote from Panda555

    For now, the last available version is 11784-r801.

    Be patient don't search for new versions. When samur has time he will compile a new version as before for all receivers and their architectures.

    Hello, can you help me how to install this oscam? I only know how to install ipk but here its a file. i have vuzero 4k with openatv

    This might help you, have a look :

    Post
    RE: [Samur Private OSCam] - Request for compilation, questions and help !!!
    (Quote from voomvoom)

    First of all unzip the file you download from here and rename it to oscam-emu.
    You have to know how to use DCC_E2 application before proceeding.
    When connected to your receiver using this exe :
    click on "Telnet" (low left corner) > type : init 4 and hit : enter
    now click on "FTP" (low left corner) then double-click usr>bin
    scroll down till you find "oscam-emu" file and delete it.
    using ftp method via dcc_e2 exe send the new oscam-emu file in here
    and right click on it and select…
    anestis1956

    octagon sf8008 4K combo

    thumbs up 1

    Hello Samur,

    help me try to understand this, in the last oscams , in protocol pcsc my meo card ( seca-nagra cak7 ) dont boot in nagra why?

    the card always starts in seca, dont init in cak 7 mode.


    in vu+ with mode internal reader works perfect with any new oscam, with the same settings


    i´ve already tested everything, i dont understand


    but In the Samur version , everything works fine.


    What does your compilation have more than the others to make protocol pcsc work in cards seca/nagra cak7?



    sorry my bad english

    Thanks

    Quote from ppppppp1

    in protocol pcsc my meo card ( seca-nagra cak7 ) dont boot in nagra why?

    hello i don't use the last version but 11778-801 and my meo card work perfectly in nagra with my PCSC reader, try this reader conf:





    if your card is initialized on nagra but you have "not found" for all requests add this:


    Code
    ecmheader                     = 0

    Hello

    detect_seca_nagra_tunneled_card= 2


    this is version of Samur? this versions, everything works fine, all the others i can´t.

    my configuration is the same as yours


    i just wanted to understand why the public oscam has this problem,

    because with internal reader working well in the box, i wanted use mini pc with pcsc and oscam linux.


    i have to use the samur version :), i can´t use my compilations.


    thanks

    Quote from ppppppp1

    this is version of Samur?

    yes i use Samur bin, my conf work with 11778-801 bin of Samur

    like you I tried to compile but it was unsuccessful, I tried a few versions found on several forums but none worked correctly, the one from Samur works perfectly with my configurations

    if you don't have initialization on nagra is maybee because you don't use "detect_seca_nagra_tunneled_card= 2"

    Edited once, last by djkage ().

    Please, open your own thread and ask for help there ...


    ;

Your resource for OSCam-EMU softcam

Find configs, downloads, tutorials, and support for emulation setup, IPTV decoding, and extended protocol support. Master emulation and extended decoding with OSCam-EMU. Access dedicated support, configs, tutorials, and downloads for enhanced IPTV and service access.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login