device = 0 is wrong.
Add like this.
device = /dev/ttyUSB0
If your usb port have other number just add it instead 0
device = 0 is wrong.
Add like this.
device = /dev/ttyUSB0
If your usb port have other number just add it instead 0
Probably not, what you wrote is for the Phoenix reader
########################################
## reader configuration
########################################
[reader]
label = Platforma_CANAL+
protocol = pcsc
device = 0
autospeed = 0
caid = 1884
mod1 = xxxx
mod2 = xxxx
key3588 = xxxx
key3460 = xxxx
key3310 = xxxx
data50 = xxxx
mod50 = xxxx
idird = xxxx
cmd0eprov = 01A0
cwpkcaid = 18FE
cwpkota = 1
nuid = xxxx
cwekey = xxxx
detect = cd
mhz = 368
cardmhz = 368
nagra_read = 1
detect_seca_nagra_tunneled_card= 0
ident = 1884:000000
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
Display More
You need to add the keys one by one from web inf and save .
;
I added the entry you entered, supplemented it with the necessary data, but I still have it
ERROR
(no entitlements)
Live log
2024/01/05 14:31:57 00000000 s (main) System name = Linux
2024/01/05 14:31:57 00000000 s (main) Host name = wyse-3040-volumio
2024/01/05 14:31:57 00000000 s (main) Release = 5.10.188-volumio
2024/01/05 14:31:57 00000000 s (main) Version = #1 SMP Mon Aug 7 14:08:06 CEST 2023
2024/01/05 14:31:57 00000000 s (main) Machine = x86_64
2024/01/05 14:31:57 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 836
2024/01/05 14:31:57 00000000 s (config) userdb reloaded: 9 accounts loaded, 0 expired, 5 disabled
2024/01/05 14:31:57 00000000 s (main) signal handling initialized
2024/01/05 14:31:57 00000000 s (config) 1000 provid's loaded
2024/01/05 14:31:57 00000000 s (config) 246 tier-id's loaded
2024/01/05 14:31:57 00000000 s (net) cccam: initialized (fd=3, port=xxxxxx)
2024/01/05 14:31:57 03435070 h (webif) webif: decompressed 173997 bytes back into 457256 bytes
2024/01/05 14:31:57 03435070 h (webif) HTTP Server running. ip=0.0.0.0 port=xxxxx
2024/01/05 14:31:57 00000000 s (reader) Platforma_CANAL+ [pcsc] creating thread for device 0
2024/01/05 14:31:57 00000000 s (main) waiting for local card init
2024/01/05 14:31:58 2D819428 r (reader) Platforma_CANAL+ [pcsc] Reader initialized (device=0, detect=cd, mhz=368, cardmhz=368)
2024/01/05 14:31:58 2D819428 r (reader) Platforma_CANAL+ [pcsc] PCSC was opened with handle: 1533895028
2024/01/05 14:31:58 2D819428 r (reader) Platforma_CANAL+ [pcsc] card detected
2024/01/05 14:31:59 2D819428 r (reader) Platforma_CANAL+ [pcsc] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2024/01/05 14:31:59 2D819428 r (-) -- Skipped 1 duplicated log lines --
2024/01/05 14:31:59 2D819428 r (reader) Platforma_CANAL+ [pcsc] detected card (Cayman) in CAK7 mode
2024/01/05 14:32:00 2D819428 r (reader) Platforma_CANAL+ [pcsc] Rom revision: DNASP420 RevS4B
2024/01/05 14:32:10 2D819428 r (reader) Platforma_CANAL+ [pcsc] card is not responding to CMD02/E - check your data
2024/01/05 14:32:10 2D819428 r (reader) Platforma_CANAL+ [pcsc] card system not supported
2024/01/05 14:32:10 2D819428 r (reader) Platforma_CANAL+ [pcsc] Normal mode failed, reverting to Deprecated Mode
2024/01/05 14:32:10 2D819428 r (reader) Platforma_CANAL+ [pcsc] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2024/01/05 14:32:10 2D819428 r (-) -- Skipped 1 duplicated log lines --
2024/01/05 14:32:10 2D819428 r (reader) Platforma_CANAL+ [pcsc] detected card (Cayman) in CAK7 mode
2024/01/05 14:32:11 2D819428 r (reader) Platforma_CANAL+ [pcsc] Rom revision: DNASP420 RevS4B
2024/01/05 14:32:21 2D819428 r (reader) Platforma_CANAL+ [pcsc] card is not responding to CMD02/E - check your data
2024/01/05 14:32:21 2D819428 r (reader) Platforma_CANAL+ [pcsc] card system not supported
2024/01/05 14:32:21 2D819428 r (reader) Platforma_CANAL+ [pcsc] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
2024/01/05 14:32:21 2D819428 r (reader) Platforma_CANAL+ [pcsc] card initializing error
2024/01/05 14:32:21 00000000 s (main) init for all local cards done
2024/01/05 14:32:21 00000000 s (emmcache) loaded 0 emmcache records from /usr/local/etc/oscam.emmcache in 0 ms
2024/01/05 14:32:21 00000000 s (emmcache) loaded 0 emmstat records from /usr/local/etc/oscam.emmstat in 0 ms
2024/01/05 14:32:44 78C2293D c (client) encrypted cccam-client 192.168.188.22 granted (ustym4kpro, au=auto (2 reader))
2024/01/05 14:32:45 50EC1E9E c (client) encrypted cccam-client 192.168.188.105 granted (vuduo4k, au=auto (2 reader))
2024/01/05 14:32:56 50EC1E9E c (ecm) vuduo4k (0BC5-0000.[1884---8F].BF6FA5FD/-HOP:00): rejected group (0 ms) (no matching reader)
You still missing DATA in your reader.
1_ Do you have data for your card ?
2_ Don't do copy/paste of your DATA directly From OSCam-s4a to My OSCam, because they are different
You need to insert the keys one by one from web inf and save the config .
3_ If you want AU works well then you will need to use my oscam also at client side .
;
I have data, I have been using it for several years and I added it to your reader, but I will not publish it here. I know that there are slight differences in reader settings between oscam from s4all and yours
Sorry Samur the new oscam oscam-11728-799.amiko-a4_a5-libusb it's without URL field to fill in.
I've replaced previous oscam-11726-799.amiko-a4_a5-libusb
In addition no way to clear ita channels
Best regards
've just tested oscam-11728-799.amiko-a4_a5-libusb on my AMIKO A5 Combo, but unfurtunately after have put in running, no way to go on webif, instead with oscam-11726-799.amiko-a4_a5-libusb webif is ok, could you please check this aspect?
I have also an Android device and web inf is ok.
take 11730-799 from:
(RE: Samur - OSCam For Android-stapi and Amiko A4_A5 Devices)
................
..........
.....
...........
...
..
[webif]
httpport = 8888
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
;
Display MoreI have pcsc drivers installed on the server, I use OSCam from @jej@n, but I wanted to test OSCam from my friend samur. This is what my rayder for the 1884 card looks like
[reader]
label = Platforma_CANAL+
protocol = pcsc
device = 0
caid = 1884
mod1 = BF5675BBA4B2CD3B1DB0F6ADE5CC1EDFCCCEB265A807465223AF9E0E26A97709F6DA14DED4F48849CECCD750B4DF2EE7CE375A957384A9336B34C624DB7311CDBDF6C958BCF4E30B713FE594E0449A6C211CE74F8410136DB1B50EE4D8AFE142330AFBE63214E4372CE8553C2E55CA89
mod2 = 8150EA00DAEB256C17F7A303E9AC5FBA63815F32B3E11D224F324055DE7301EB6EAC8869F2547A613551EEE458A03310AAFE2438152277E34024610268DF3D1A540260D4FDAAFEE2D03583628E925D11C48E1B5B947F0602E7CBB57034A6996E0BB0A42F3D5CEFB8E9C4B8E588EA7529
key3588 = xxxxxxxxxxxxxxxxxxxxxx
key3460 = xxxxxxxxxxxxxxxxxxxxxx
key3310 = xxxxxxxxxxxxxxxxxxxxxx
data50 = B6711C868C3EE72533A4E08C1364B83AEEFDEBE9FB54156A8776D872CBC41FF2E5EA2CBAF4F26A58C521EC53E310FC494354E49ECE6CD0F9631B724FAB0C8BAEC1F66C346AD2DB1CB3871AF44C1E1592
mod50 = DB9E1F1BD23C6153444E444D8E6C471E162EC63C599D44F476E0D40C3840E0FDB7B63D174DD73B575543983F2F2DFB94E3644958AE642C91636A6BE55528478EB7A422479598C68E6F1FC9D647BBC4D5
idird = xxxxxxxxx
cwpkcaid = 18FE
otpcsc = 00FF
cwpkota = 1
nuid = xxxxxxxxxxxxxxxxxxxxxx
cwekey = xxxxxxxxxxxxxxxxxxxxxx
detect = cd
nagra_read = 1
detect_seca_nagra_tunneled_card= 0
group = 1
emmcache = 1,1,2,0
disablecrccws = 1
Adding Omnikey Cardman 3121 USB to Ubuntu or Debian
Posted on November 25, 2012 by joe6915
First You can Buy Omnikey From Here
Type in the terminal window:
apt-get install pcscd
apt-get install pcsc-tools
When propted to install press Y.
Grab the Omnikey Drivers from here
The reader works on another OSCAM, so I don't need to install anything. Read before you write something
Ps. samur
I also tested the cards under the Stinger reader and the Conax 0B01 card works, but the 1884 card does not.
You may need some specific settings in the rayder
[reader]
label = StingerA
protocol = mouse
device = /dev/serial/by-id/usb-FTDI_StingerUSB_3A004580-if00-port0
caid = 1884
mod1 = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
mod2 = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
key3588 = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
key3460 = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
key3310 = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
data50 = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
mod50 = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
idird = xxxxxxxx
cwpkcaid = 18FE
otpcsc = 00FF
cwpkota = 1
nuid = xxxxxxxxxxxxxxxxxxxxx
cwekey = xxxxxxxxxxxxxxxxxxxxxxxxxxx
detect = cd
nagra_read = 1
detect_seca_nagra_tunneled_card= 0
group = 1
emmcache = 1,1,2,0
disablecrccws = 1
Oscam 11727 was working in my Dreambox Two GP4.2 but 11728 and 11730 not.
in Samur oscam there is setting which card you want to use cameleon / cayman 0 1 you need to activate it. This settings refers to all HW paired cards like 1811/1813/1830 1884 etc.....
Ps. In my free time I will test both binaries on Stinger and Phoenix
Use just the first version, it will works with all card readers and use just correct configs .
Thanks,
in Samur oscam there is setting which card you want to use cameleon / cayman 0 1 you need to activate it. This settings refers to all HW paired cards like 1811/1813/1830 1884 etc.....
detect_seca_nagra_tunneled_card .
detect_seca_nagra_tunneled_card =
0 - Merlin, Cayman Cards [ 1856, 1883, 1884(NC+), 1886, 1870, 186A(HD04),...]
1 - Enabled (default) Seca/Nagra Cards
2 - Cameleon, cak6.x Cards [ 1811, 1813, 1817, 1818, 1819,1821, 1830(Maxtv), 1843(HD02), 1860(HD03),...]
cwekey = CWPK[0],CWPK[1],CWPK[2],...,CWPK[7] ===> the syntax of "cwekey" For Nagra and Conax.
;
Hi, I am looking for the latest OSCAM with PCSCreader , SKY UK Icam and libsll303 for ARM
Hi, I am looking for the latest OSCAM with PCSCreader , SKY UK Icam and libsll303 for ARM
;
Don’t have an account yet? Register yourself now and be a part of our community!