Is the 11750 mips version working for icam De or do i need to go back to a earlier version Thanks
I've tried only a little bit and for me is working with Vu+ Solo2
Is the 11750 mips version working for icam De or do i need to go back to a earlier version Thanks
I've tried only a little bit and for me is working with Vu+ Solo2
Have you activated stream relay ?
@zvonko67 - For me, 750 is just as functional as 743. I don't have anything special, I use the same configuration in DM TWO (experimental oe2.6) and Octagon 8008 (OpenATV 7.5) and in both I have written in oscam.conf:
[streamrelay]
stream_relay_enabled = 1
stream_relay_buffer_opt = 0
stream_relay_buffer_time = 600
stream_relay_ctab = 09C4,098C,098D
stream_ecm_delay = 0
And in the folder /etc/enigma2/ I have the file whitelist_streamrelay
I use the same configuration in DM TWO (experimental oe2.6) and Octagon 8008 (OpenATV 7.5) and in both I have written in oscam.conf:
Thank you very much, I changed the content of my oscam.conf file like yours and now it's working in Octagon 8008.
Before it was like this:
[streamrelay]
stream_ecm_delay = 5
stream_emm_enabled = 0
stream_relay_ctab = 098D,09CD,0960,0961,0963
and was working very well in Samur's 734-799 version both for DE and UK, but somehow icam stopped working in this latest release with above config.
Display More@zvonko67 - For me, 750 is just as functional as 743. I don't have anything special, I use the same configuration in DM TWO (experimental oe2.6) and Octagon 8008 (OpenATV 7.5) and in both I have written in oscam.conf:
Code[streamrelay] stream_relay_enabled = 1 stream_relay_buffer_opt = 0 stream_relay_buffer_time = 600 stream_relay_ctab = 09C4,098C,098D stream_ecm_delay = 0
And in the folder /etc/enigma2/ I have the file whitelist_streamrelay
thanks mate
it worked with your configuration
For me with this config is working too. Thanks.
Do you have the picons for these icam channels?
Hopefully Samur won't be angry that we are debating in his thread like this
Doubt it.......it looks like a lot of users hadn't enabled stream relay
Sky de on zgemma H8 doesn't work on this oscam 11748. Version 11734 all ok. Pure 7.3
I think samur he introduced a new option : please follow the example : correct it from webiff : will work 100 %
start oscam 19:37 , key found 19:41
can you post your config ?
I use the starsat 2000 hyper receiver to decode the afn code and then copy it to the vu+ ultimo 4k receiver.
in oscam.server
[reader]
label = EMU
enable = 1
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0E00,1010,2600,44A0
detect = cd
ident = 0500:021110;0E00:000000;1010:000000;2600:000000;44A0:000000
group = 2
emmcache = 2,1,2,1
emu_auproviders = 0E00:000000;1010:000000;44A0:000000
Display More
in oscam.conf
[global]
disablelog = 0
logfile = stdout;syslog;/tmp/oscam.log
initial_debuglevel = 66
maxlogsize = 0
preferlocalcards = 2
ecmfmt = c&0p/s/d/i/l_w HOP:j:g_t
disablecrccws_only_for = 0100:00006D,003311;0500:032830,042820,030B00,041950,060A00,060C00;0604:000000;0624:000000;098C:000000;098D:000000;09C4:000000;09CD:000000;0B00:000000;0B01:000000;1708:000000;1810:000000;1811:000000,003311,003315;1813:000068;1819:00006D;1884:000000;0E00:000000
I don't have any special icons for Icam channels. I use classically list of stations from Vhaniball and picones from Chocholousk, which I download via his plugin. Everything is simple and freely accessible.
Hi Warder.
Actually I'm using ciefp settings but I'd like to use Vhannibal's setting with Samur's Oscam.
What must I do after install the list or, better, Vhannibal's plugin?
Thanks.
I don't have any special icons for Icam channels. I use classically list of stations from Vhaniball and picones from Chocholousk, which I download via his plugin. Everything is simple and freely accessible.
Hi Warder.
Actually I'm using ciefp settings but I'd like to use Vhannibal's setting with Samur's Oscam.
What must I do after install the list or, better, Vhannibal's plugin?
Thanks.
we are going off topic here, see the picon section
As I wrote last time, I have nothing special.
I have Samur's Oscam installed, I have the file whitelist_streamrelay in /etc/enigma2/ and you can easily use CIEFP settigs as well.
After installing the CIEFP settings, i chose the SKY DE - Icam : streamrelay
or DKY DE : Movies : Kids offer
the picture ran just fine.
But Jenseneverest is right, this is Samura's thread, so I apologize once again for occupying it.
For those on OpenAtv 7.4 who may have some problems using oscam-11748-800, here is what i have found and the "solution" (for my own problem),
hoping it may work for someone else
Using oscam-11734-799-armv7ve-libusb-aio for Vu+ 4K SE on OpenAtv 7.4 with initial conf given on first page, working flawless.
Updating to oscam-11748-800-armv7ve-libusb-aio, CWs for SkyUK & SkyDe was shown on log but no clearing.
After some reviews and tests on this post and another one, i finally made it working again (btw clearing) by adding on the Source Stream User (option i dont remember so far used before ??? Samur may answer about that) the name i use on my machine, a reboot and it is clearing again on screen.
Regards
I think samur he introduced a new option : please follow the example : correct it from webiff : will work 100 %
Thx,work on h9 s se but on h8 work not. If I switch to sky de oscam immediately crashes
What does "fix demuxer" (refers to stream relay) setting does in DVB-api configuration
please latest oscam for
Linux-x86_64-webif-dvbapi-ssl-1.0.1f-libusb
How does DES decoding work for you in PowerVu (1W/TV5, 5E/SIS, 5E/MTN, 16E/SNAI, 16E/IPPICA) in aarch64 (DM One-Two)?
CW shows OK (sometimes ECM Checksum error), but no picture.
With CSA in PowerVu (9E/AFN) , the picture is fine.
Don’t have an account yet? Register yourself now and be a part of our community!