Samur's OSCam - Request for compilation, questions and help !!!

There are 808 replies in this Thread which was already clicked 123,283 times. The last Post () by wawa16.

    card for DVB-T/T2 platform,

    the card was sold without a CAM module,

    CAM module is used for cardless CAid 069A


    same problem with trunk 11734

    Quote from EnoSat

    card for DVB-T/T2 platform,

    the card was sold without a CAM module,

    EnoSat you try to use the the 'dynamic camkey' of the 0624, but since the 0668 is not l2b ,

    that's why it doesn't work .

    you have to use the same configuration as the original oscam-trunk

    for the 0668 card . (add the rsa and box key to the configuration)

    ####

    For the aarch64 Device you will need to find a correct config:

    you should try to find the right data speed for the card,

    you should somehow synchronize the reader with the card...


    https://wiki.streamboard.tv/wi…nfig/oscam.server#cardmhz ((cardmhz, mhz, autospeed)


    ;

    CAID 0668

    Code
    RSA AB722A8CAA9F58DE0D1CBB6FF329C961ED9DD759B103082D1BAE64C27A861D42E7F631891C2660EFA57484F80BBB4E0E8249A8368E31BD3FFC369FBE95160528
BOXKEY B1B2B3B4B5B6B7B8
2024/04/06 18:06:11 7184D897 r   (reader) RTVS_zaloha [smargo] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 37 2E 30 9F 2024/04/06 18:06:12 7184D897 r   (reader) RTVS_zaloha [smargo] detect irdeto card2024/04/06 18:06:13 7184D897 r   (reader) RTVS_zaloha [smargo] Irdeto SC 70 version 2 revision 0, patch level 22024/04/06 18:06:13 7184D897 r   (reader) RTVS_zaloha [smargo] caid: 0668, acs: 0.06, country code: SVK2024/04/06 18:06:13 7184D897 r   (reader) RTVS_zaloha [smargo] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##2024/04/06 18:06:14 32BD3B38 r   (reader) freesat [irdeto] uclan emmtype=shared, len=63 (hex: 0x3F), cnt=0: written (89 ms)2024/04/06 18:06:16 7184D897 r   (reader) RTVS_zaloha [smargo] active providers: 4 (03eb78,ffffff,ffffff,ffffff)2024/04/06 18:06:16 7184D897 r   (reader) RTVS_zaloha [smargo] found card system irdeto2024/04/06 18:06:16 7184D897 r   (reader) RTVS_zaloha [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max allotted of 12024/04/06 18:06:16 7184D897 r   (reader) RTVS_zaloha [irdeto] entitlements for provider: 1, id: 03EB782024/04/06 18:06:16 7184D897 r   (reader) RTVS_zaloha [irdeto] chid: 0006, date: 2024/03/31 - 2024/12/102024/04/06 18:06:16 7184D897 r   (reader) RTVS_zaloha [irdeto] chid: 7FFE, date: 2024/03/26 - 2024/04/252024/04/06 18:06:16 7184D897 r   (reader) RTVS_zaloha [irdeto] chid: 7FFD, date: 2024/03/26 - 2024/04/052024/04/06 18:06:16 7184D897 r   (reader) RTVS_zaloha [irdeto] chid: FFD8, date: 2024/01/14 - 2024/01/242024/04/06 18:06:17 361679B6 c      (ecm) uclan (0653@000000/7533/03F7/44:A3C932D6E112F02D8C19357F9CE8FCA0): found (131 ms) by freesat - JOJ HD2024/04/06 18:06:18 32BD3B38 r   (reader) freesat [irdeto] uclan emmtype=global, len=13 (hex: 0x0D), cnt=0: written (49 ms)2024/04/06 18:06:25 7184D897 r   (reader) RTVS_zaloha [irdeto] ready for requests

    SAMUR oscam

    For Dreambox ONE/TWO [ aarch64 ]

    Edited 2 times, last by master G: Merged a post created by dudko999 into this post. ().

    thumbs up 1

    Hello!

    version 1.30_svn, build r11750-800 (sh4-stapi5_cak7-l2b_(samur)) - CS, Biss and RusMir work


    I replace only the binary with:


    version 1.30_svn, build r11759-801 (sh4-stapi5_cak7-l2b_(samur)) - They don't work, no cs, no Biss, no RusMir


    The last changes in dvbapi were made in „11754”


    - extended the ecm_info file (thanks to DimitarCC) (e64a1563) · Commits · common / oscam · GitLab
    - force use of UTF8 for Webif (thanks to lpm11) - removed Touch function (thanks to lpm11) - Do not start DVBAPI client (and unnecessary thread) if DVBAPI is…
    git.streamboard.tv


    (Is it possible that even more new bugs have been created?)

    OSCam-11760-801 (SH4-stapi5-v0.0.5)

    OSCam-11760-801 (SH4-stapi5-v0.0.5)-test-patchs - OK! - CS, Biss and RusMir

  • Post by samur ().

    This post was deleted by the author themselves ().

  • Post by samur ().

    This post was deleted by the author themselves ().

    Only works OSCam-11760-801 (SH4-stapi5-v0.0.5)-test-patchs, OSCam-11760-801 (SH4-stapi5-v0.0.5) - not working

    1)_ OSCam-11760-801 (SH4-stapi) - not working

    2)_ OSCam-11760-801 (SH4-stapi)-test-patchs - not working

    Edited once, last by master G: Merged a post created by haykazun into this post. ().

    Thanks 1
    Quote

    2)_ OSCam-11760-801 (SH4-stapi)-test-patchs - not working

    Samur, Sorry I got it wrong , I checked again...


    2)_ OSCam-11760-801 (SH4-stapi)-test-patchs - OK! - CS, Biss and RusMir 👍


    Hi samur


    Installed the latest version (11759-r801 mipsel libusb) and it works great. There are some image freezes on some channels, but it all depends of the server.If the server is 'bad', no oscam or stremrelay configuration will help. Thanks for your work and future updates.

    Hello, samur


    Thanks for all your binaries.


    Only one suggestion.


    Perhaps these files for Samur - OSCam For Dreambox ONE/TWO [ aarch64 ] ( RE: Samur - OSCam For Dreambox ONE/TWO [ aarch64 ] ) , like https://www.linuxsat-support.c…9-801-aarch64-libusb-zip/ should be in CoreELEC thread too ( OSCam For CoreELEC and Rpi3 ).


    Yes, I know that in the thread for Dreambox ONE/TWO [ aarch64 ] you mention CoreELEC in the list of STB's but perhaps it should be more obvious putting the aarch64 file in CoreELEC thread too.


    Thanks for all and kind regards

OSCam-EMU Support Forum

Configs, discussion, downloads and guides for OSCam-EMU Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login