Hello after i have downloaded the plugin "service editor" (or something like that) the receiver doesn't start anymore. it continues to go from 0% to 100% and repeat it.
So i've tried to flash a new openatv image but now it doesn't work at all
if I put a zip image (recovery or not) in a usb i have RCUY message on the receiver and a fixed image on the screen as you can see below.
please help me, what can I do?
thank you in advance
best regards
First things first, if your box ever goes into a boot loop, don't panic and reflash, it is usually pretty easy to get out of with a bit of ftp'ing into your box to remove the rogue element. Next time ask the forum how to get out of your boot loop.
But as its too late now, firstly are you sure you are flashing the correct image.
Better to try an older openatv 6.4 first and then you can flash online afterwards
You should just be able to reflash again. Try it with a proper branded usb, some cheap usb sticks are no good.
1) First Download new Recovery Image AX61 : Download : openATV Nightly Downloads
2) Copy and extract the files to a Fat32 Formatted USB device
3) Power Off the Box and Insert the USB Device on the back size in the White Port !
4) Press and Hold the U-Boot button on the left side, Power on the box and wait for "FLSH" in the display.
Does your menu button work on that openatv splash screen, or is it complete frozen on it.
It will show the splash screen if there is no channels scanned or tuned in
i would try the openvix image next. and see if that does anything different.
done but after that the receiver continue to restart as if you have flashed nothing with the same problem appeared after plugin installation
After flashing the recovery__emmc.zip you`ll need to flash the mmc.zip version to slot 1.
This is a basic guide to USB flash a local image zip file to the AX Technology AX HD61.
User will require a USB stick formatted FAT32.
1) Download your chosen image (mmc.zip - not recovery_emmc.zip).
2) Transfer the complete zip file to root of the USB stick. Do not unzip the file.
3) Power off the AX HD61 and connect the USB stick to the front USB port behind the front flap.
4) Power on the AX HD61, as soon as you power on HOLD DOWN TOP LEFT POWER BUTTON OR OK button on the remote.
5) Once you're booted into the Multiboot recovery menu screen below select 'Bootmenu' at the bottom and press OK on the remote.
6) On the next screen select 'Flash local image' and press OK on the remote.
7) On the next screen you select the USB stick where your image zip file is located.
8) On the next screen you'll then select the zip file that's on your USB stick that you'd like to flash and press OK on the remote.
9) You'll now select which slot you'd like to flash your image to. Remember which slot you are currently booting from and have setup. Flashing to that slot WILL REFLASH that slot, you will loose everything you have setup in that slot.
10) Once completed you can select which image you'd like to boot into and press ok on the remote.
but i need to do this AFTER flashing recovery?
If after flashing the recovery it doesn`t automatically boot into an image i would flash the mmc.zip file.
is the problem solved or not
I once had the same problem.
Flashed the old Openatv-6.3-ax61-20210110_recovery_emmc.zip, then strangely it worked again.
I do not know why. Give it a try.
After flashing recovery, you still have to flash an "unpacked image" via USB stick
Supporting the Enigma2, satellite and IPTV community since 2010.
Independent • Community Driven • Established 2010
