Help! AX HD 61 stuck on boot - rCUY on display

Quote from master G

This is a basic guide to USB flash a local image zip file to the AX Technology AX HD61.

User will require a USB stick formatted FAT32.

1) Download your chosen image (mmc.zip - not recovery_emmc.zip).

2) Transfer the complete zip file to root of the USB stick. Do not unzip the file.

3) Power off the AX HD61 and connect the USB stick to the front USB port behind the front flap.

4) Power on the AX HD61, as soon as you power on HOLD DOWN TOP LEFT POWER BUTTON OR OK button on the remote.

5) Once you're booted into the Multiboot recovery menu screen below select 'Bootmenu' at the bottom and press OK on the remote.

6) On the next screen select 'Flash local image' and press OK on the remote.

7) On the next screen you select the USB stick where your image zip file is located.

8) On the next screen you'll then select the zip file that's on your USB stick that you'd like to flash and press OK on the remote.

9) You'll now select which slot you'd like to flash your image to. Remember which slot you are currently booting from and have setup. Flashing to that slot WILL REFLASH that slot, you will loose everything you have setup in that slot.

10) Once completed you can select which image you'd like to boot into and press ok on the remote.

Display More

Hi,

There was an option ANDROID BOOT UP and by mistake I selected that one and now the box (AX HD61 4k) is in the stage of rCUY and can not go to boot menu.

I think the latest Vix image of AX HD61 4 K is little problamatic. I am facing some issues with Openvix 6.7 020 image.

Could you please help? AX

Quote from Raf007

Quote from master G

This is a basic guide to USB flash a local image zip file to the AX Technology AX HD61.

User will require a USB stick formatted FAT32.

1) Download your chosen image (mmc.zip - not recovery_emmc.zip).

2) Transfer the complete zip file to root of the USB stick. Do not unzip the file.

3) Power off the AX HD61 and connect the USB stick to the front USB port behind the front flap.

4) Power on the AX HD61, as soon as you power on HOLD DOWN TOP LEFT POWER BUTTON OR OK button on the remote.

5) Once you're booted into the Multiboot recovery menu screen below select 'Bootmenu' at the bottom and press OK on the remote.

6) On the next screen select 'Flash local image' and press OK on the remote.

7) On the next screen you select the USB stick where your image zip file is located.

8) On the next screen you'll then select the zip file that's on your USB stick that you'd like to flash and press OK on the remote.

9) You'll now select which slot you'd like to flash your image to. Remember which slot you are currently booting from and have setup. Flashing to that slot WILL REFLASH that slot, you will loose everything you have setup in that slot.

10) Once completed you can select which image you'd like to boot into and press ok on the remote.

Display More

Hi,

There was an option ANDROID BOOT UP and by mistake I selected that one and now the box (AX HD61 4k) is in the stage of rCUY and can not go to boot menu.

I think the latest Vix image of AX HD61 4 K is little problamatic. I am facing some issues with Openvix 6.7 020 image.

Could you please help? AX

Display More

Flash with USB and the firmware recovery_emmc.

Your receiver is trying to boot the android but in the flash is not this firmware and is stuck on recovery, remember what image you use and flash the recovery_emmc image and your reciever will start normally.

Quote from Predator99

Quote from Raf007

Quote from master G

This is a basic guide to USB flash a local image zip file to the AX Technology AX HD61.

User will require a USB stick formatted FAT32.

1) Download your chosen image (mmc.zip - not recovery_emmc.zip).

2) Transfer the complete zip file to root of the USB stick. Do not unzip the file.

3) Power off the AX HD61 and connect the USB stick to the front USB port behind the front flap.

4) Power on the AX HD61, as soon as you power on HOLD DOWN TOP LEFT POWER BUTTON OR OK button on the remote.

5) Once you're booted into the Multiboot recovery menu screen below select 'Bootmenu' at the bottom and press OK on the remote.

6) On the next screen select 'Flash local image' and press OK on the remote.

7) On the next screen you select the USB stick where your image zip file is located.

8) On the next screen you'll then select the zip file that's on your USB stick that you'd like to flash and press OK on the remote.

9) You'll now select which slot you'd like to flash your image to. Remember which slot you are currently booting from and have setup. Flashing to that slot WILL REFLASH that slot, you will loose everything you have setup in that slot.

10) Once completed you can select which image you'd like to boot into and press ok on the remote.

Display More

Hi,

There was an option ANDROID BOOT UP and by mistake I selected that one and now the box (AX HD61 4k) is in the stage of rCUY and can not go to boot menu.

I think the latest Vix image of AX HD61 4 K is little problamatic. I am facing some issues with Openvix 6.7 020 image.

Could you please help? AX

Display More

Flash with USB and the firmware recovery_emmc.

Your receiver is trying to boot the android but in the flash is not this firmware and is stuck on recovery, remember what image you use and flash the recovery_emmc image and your reciever will start normally.

Display More

Thank you very much for your help. I will try later on and update you.

Appreciate it.