OpenPli 12.3 DM7020HD original

Hello MR I put this image in the dreambox, but I have a problem, Pluto TV doesn't work, can you please help me.

Thank you for the good work

we need new for dm7020v2

Hello mrlu my dear friend. First of all, thank you for your work and efforts on the site. I have a problem.
Today, I took the new image openpli-11.3_dm7020hd_original_20230630, whose default emulator is oscam version 11.718, from the relevant section of the site where you placed the file, and installed it on the Dreambox. The only problem I've run into so far is with Biss codes. According to my cccam account, other card channels open fine and perfect, but the channels encoded with Biss code do not open at all. I put the SoftCam.Key file in the Usr/keys path, but the channels with Biss code do not open at all. I even placed the SoftCam.Key file in the etc/tuxbox path to test, but still the channels with Biss code do not open at all. Please help me. I will be grateful. Thank

Hello dear friend, sorry to bother you again. In fact, I did not write the complete etc/tuxbox path in my previous question. In fact, I put the SoftCam.Key file in the path etc/tuxbox/config/, but still the channels encoded with Biss code do not open at all. I don't know what else to do. Again, if there is a way, please guide me. I would be grateful. Thank

1z1z

This oscam from the feed does not support constant.cw or biss encoding.It was the same problem with oscam when I had the Openpli 11.3 image installed for the dm800se.Uninstall oscam (Plugins - Remove plugins - softcams) and restart the box. Then install ipk v.11718 oscam-icam by samur and you will have biss support.

It is possible that an error may appear after installing the new oscam (Errno 146: Connection refused), so install Ncam-emu,but not from feeds.

Hi MRLU, Flashed the Openpli-12.3 dm7020hd from here yesterday. There is a problem with the indication of the HOUR on the display: it is one hour too late, so 18h00 instead of 17h00. At set-up I chose EUROPE and as a country / city like Istanbul because there was no choice between Belgium or the Netherlands.. Please give your opinion if there is a solution for this ??

pasted-from-clipboard.png

Openen in Google Translate•

Unfortunately, no picons are displayed.
Infobar and channel list
usr/share/enigma2/picon
220*132.png

What am I not doing right? Thanks...

-----

Installed again, unfortunately no picons in the InfoBar and channel list

Quote from Panda555

1z1z

This oscam from the feed does not support constant.cw or biss encoding.It was the same problem with oscam when I had the Openpli 11.3 image installed for the dm800se.Uninstall oscam (Plugins - Remove plugins - softcams) and restart the box. Then install ipk v.11718 oscam-icam by samur and you will have biss support.

It is possible that an error may appear after installing the new oscam (Errno 146: Connection refused), so install Ncam-emu,but not from feeds.

Hi, biss works with ipk v.11718 oscam-icam but other channels like HD+ Germany and others are facing problems. whereas with original built in Oscam work without problem. what is wrong here?

mrlu

can you make a new dm7020v1-Original-Image (date: 29-10-2023) aka latest dm500hd/800se-Image ?!

Thank You!

Tried this image and the box freezes when on a streamrelay channel. I have to switch it off from the back switch. The freezing occurs after 10 or 30 or 45 mins. It is random when it happens as listed in a thread with this issue on other images like openpli8star openpli9star and newenigma2.

Mrlu have you tried this image on a streamrelay channel for an hour or so with no freezing issues?

For the rest the image is great.

Thanks.

Update this

Quote from mrlu

-GStreamer 1.22.9

when a new update ? thanks and good job!!

Will there be an update version for this receiver with the newer Python 3.9.9, Oscam, etc.?