Hi everyone on forum I need help.Can someone post a link where i can download driver cp 210x usb to uart and dreaum up for dreambox 800 pvr sim 1.0 bootloader 70.The ip address shows up on display without problems,But flashing of new image is not possible.thank you :)
DM800 PVR need help
- kaktuscar
- Thread is marked as Resolved.
-
-
CP210x USB to UART Bridge VCP Drivers - Silicon LabsThe CP210x USB to UART Bridge Virtual COM Port (VCP) drivers are required for device operation as a Virtual COM Port to facilitate host communication with…www.silabs.com
-
-
ThreadSecondstage Bootloader: SSL 62 - SSL69 - SSL70 - SSL72 - SSL73 - SSL74 - SSL75 - SSL76C - SSL76D - SSL82 - SSL84 - SSL84A - SSL84B - SSL84D Sim2 for Dreambox DM800 CloneOk you need to download ss76C update file
then enter flash mode as normal the follow these steps
1 flash genuine image of choice
2 after image has flashed (dont hit reboot) open 2nd browser window with dm i-p address
3 flash the 76c file . reboot box and good to go dont give your box a chance to report no CA errror , just put the 76c in before you do anythin with the box
If you don't follow these steps correctly you will need get ERROR1 NO CA and you will need my other tut on how to fix....!!Flash the image first, don`t reboot just yet, flash the bootloader to match the image, now reboot.
-
-
I have sim 1.0 and bootloader 70
Flash latest image linked above that is compatible with the ssl84d bootloader, don`t reboot yet, flash the ssl84d bootloader, now reboot.
If dreamup or flashing via a browser doesn`t work try this tool ~ RE: Dreambox OptiFlasher Enigma2 EDition Latest Version
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!