Oscam Icam Sky DE and UK

Quote from djole66

Code

I have obh 5.1 with oscam icam 11714 and I can tell you that it works great, without frezee.

I tried yesterday what you describe , a few opened only.

Entering the “Sky Deutschland iCAM” bouquet there are no channels, it is empty. I have repeated the procedure several times but the bouquet remains empty inside. I don't understand where I'm wrong.

Quote from Salvuccio9219

Entering the “Sky Deutschland iCAM” bouquet there are no channels, it is empty. I have repeated the procedure several times but the bouquet remains empty inside. I don't understand where I'm wrong.

I found that too, if you go into plugins on most images there are settings to download channel lists, ciefp motor settings has icam sky deutschland in the latest list.

Oscam 11714 arm EMU with icam

Dont work as Icam

only a few channels work...

Can you send me your config. My configs oscamicam + Oscam_11.714 dont work.

Quote from ente

Can you send me your config. My configs oscamicam + Oscam_11.714 dont work.

Icam package configs and list are here in filebase.

And yes don’t work without Icam Server !

that's easy, ask your line provider

Quote from scouse645

Quote from Salvuccio9219

Entering the “Sky Deutschland iCAM” bouquet there are no channels, it is empty. I have repeated the procedure several times but the bouquet remains empty inside. I don't understand where I'm wrong.

I found that too, if you go into plugins on most images there are settings to download channel lists, ciefp motor settings has icam sky deutschland in the latest list.

I have OpenATV 6.4, could you tell me more or less the procedure? Thank you.

if everybody makes all like here written all will be best

read #post 7 klick me

Quote from SAT_Nobody

that's easy, ask your line provider

Hi. My provider delivers correctly. Have also tried other providers and everywhere the same result. What should I say now.

your line provider don`t have ICAM and all other provider you tryed too not

Why goes every day a different sender and not all.

Quote from SAT_Nobody

your line provider don`t have ICAM and all other provider you tryed too not

Code

Why goes every day a different sender and not all.

you might have to test. Thanks

DVB API with ICAM streamrelay support ...

arm & mipsel

please report if it's ok or not

##

Don't forget to change the settings again:

"Decrypt streams -> yes", 
"Embed ECM in stream -> no" 
"Decrypt received streams -> no"

;

Quote from tae

The patch has been checked in, so the request is done!

If you don't know what to do

Quote from biko

Thanks my bro -MAHDI- DZ

Thanks @JLcode i don't see your topic from here

icam patch

Code

set : USE_LIBUSB=1
 |       set : USE_UTF8=1
 |       set : USE_LIBCRYPTO=1
 |       set : custom CONF_DIR=/var/ (via toolchain.cfg)
 |   PROFILE : arm.profile
 |  MAX_CPUS : use 8 of 8 CPU(s)
 |  CONF_DIR : /var/
 |  UseFlags : USE_LIBCRYPTO=1 USE_LIBUSB=1 USE_UTF8=1
 |  Addons   : WEBIF LIVELOG JQUERY TOUCH DVBAPI READ_SDT IRDETO_GUESSING DEBUG MONITOR CACHEEX CACHEEX_AIO CWCC CLOCKFIX EMU SOFTCAM
 |  Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX RADEGAST SCAM CONSTCW
 |  Readers  : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
 |  CardRdrs : PHOENIX INTERNAL MP35 SMARGO DB2COM STINGER DRECAS SMART
 |  Binary   : /home/mahdi-dz/s3/support/binaries/oscam-svn11713-arm_dream-webif-dvbapi-libusb-emu798
 GEN -------->  webif/pages.c
 GEN -------->  Compressed 466816 template bytes into 182060 bytes. 284756 saved bytes (61.00%).
 BUILD ------>  cscrypt/i_cbc.c
 BUILD ------>  cscrypt/i_ecb.c
 BUILD ------>  cscrypt/i_skey.c
 BUILD ------>  cscrypt/rc6.c
 BUILD ------>  cscrypt/fast_aes.c
 BUILD ------>  cscrypt/sha256.c
 BUILD ------>  cscrypt/md5.c
 BUILD ------>  cscrypt/des.c
 BUILD ------>  cscrypt/mdc2.c
 BUILD ------>  csctapi/atr.c
 BUILD ------>  csctapi/icc_async.c
 BUILD ------>  csctapi/io_serial.c
 BUILD ------>  csctapi/protocol_t0.c
 BUILD ------>  csctapi/protocol_t1.c
 BUILD ------>  csctapi/ifd_db2com.c
 BUILD ------>  csctapi/ifd_mp35.c
 BUILD ------>  csctapi/ifd_phoenix.c
 BUILD ------>  csctapi/ifd_drecas.c
 BUILD ------>  csctapi/ifd_sci.c
 BUILD ------>  csctapi/ifd_smargo.c
 BUILD ------>  csctapi/ifd_smartreader.c
 BUILD ------>  minilzo/minilzo.c
 BUILD ------>  csctapi/ifd_stinger.c
 BUILD ------>  module-cacheex.c
 BUILD ------>  module-camd35.c
 BUILD ------>  module-camd35-cacheex.c
 BUILD ------>  module-cccam-cacheex.c
 BUILD ------>  module-cccam.c
 BUILD ------>  module-cccshare.c
 BUILD ------>  module-constcw.c
 BUILD ------>  module-emulator-osemu.c
 BUILD ------>  module-emulator.c
 BUILD ------>  module-emulator-streamserver.c
 BUILD ------>  module-emulator-cryptoworks.c
 BUILD ------>  module-emulator-director.c
 BUILD ------>  module-emulator-biss.c
 BUILD ------>  module-emulator-irdeto.c
 BUILD ------>  module-emulator-nagravision.c
 BUILD ------>  module-emulator-powervu.c
 BUILD ------>  module-emulator-icam.c
 BUILD ------>  module-emulator-viaccess.c
 BUILD ------>  ffdecsa/ffdecsa.c
 BUILD ------>  module-csp.c
 BUILD ------>  module-cw-cycle-check.c
 BUILD ------>  module-dvbapi-chancache.c
 BUILD ------>  module-dvbapi.c
 BUILD ------>  module-gbox-helper.c
 BUILD ------>  module-gbox-sms.c
 BUILD ------>  module-gbox-remm.c
 BUILD ------>  module-gbox-cards.c
 BUILD ------>  module-gbox.c
 BUILD ------>  module-ird-guess.c
 BUILD ------>  module-monitor.c
 BUILD ------>  module-newcamd.c
 BUILD ------>  module-newcamd-des.c
 BUILD ------>  module-radegast.c
 BUILD ------>  module-scam.c
 BUILD ------>  module-webif-lib.c
 BUILD ------>  module-webif-tpl.c
 BUILD ------>  module-webif.c
 BUILD ------>  webif/pages.c
 BUILD ------>  reader-common.c
 BUILD ------>  reader-bulcrypt.c
 BUILD ------>  reader-conax.c
 BUILD ------>  reader-cryptoworks.c
 BUILD ------>  reader-dgcrypt.c
 BUILD ------>  reader-dre.c
 BUILD ------>  reader-dre-cas.c
 BUILD ------>  reader-dre-common.c
 BUILD ------>  reader-dre-st20.c
 BUILD ------>  reader-griffin.c
 BUILD ------>  reader-irdeto.c
 BUILD ------>  reader-nagra-common.c
 BUILD ------>  reader-nagra.c
 BUILD ------>  reader-nagracak7.c
 BUILD ------>  reader-seca.c
 BUILD ------>  reader-tongfang.c
 BUILD ------>  reader-viaccess.c
 BUILD ------>  reader-videoguard-common.c
 BUILD ------>  reader-videoguard1.c
 BUILD ------>  reader-videoguard12.c
 BUILD ------>  reader-videoguard2.c
 BUILD ------>  oscam-aes.c
 BUILD ------>  oscam-hashtable.c
 BUILD ------>  oscam-array.c
 BUILD ------>  oscam-cache.c
 BUILD ------>  oscam-chk.c
 BUILD ------>  oscam-client.c
 BUILD ------>  oscam-conf.c
 BUILD ------>  oscam-conf-chk.c
 BUILD ------>  oscam-conf-mk.c
 BUILD ------>  oscam-config-account.c
 BUILD ------>  oscam-config-global.c
 BUILD ------>  oscam-config-reader.c
 BUILD ------>  oscam-config.c
 BUILD ------>  oscam-ecm.c
 BUILD ------>  oscam-emm.c
 BUILD ------>  oscam-emm-cache.c
 BUILD ------>  oscam-failban.c
 BUILD ------>  oscam-files.c
 BUILD ------>  oscam-garbage.c
 BUILD ------>  oscam-lock.c
 BUILD ------>  oscam-log.c
 BUILD ------>  oscam-log-reader.c
 BUILD ------>  oscam-net.c
 BUILD ------>  oscam-llist.c
 BUILD ------>  oscam-reader.c
 BUILD ------>  oscam-simples.c
 BUILD ------>  oscam-string.c
 BUILD ------>  oscam-time.c
 BUILD ------>  oscam-work.c
 BUILD ------>  oscam.c
 BUILD ------>  Distribution/list_smargo-1.20_svn11713-798-arm-newnigma2-linux-gnueabihf-libusb
 LINK ------->  /home/mahdi-dz/s3/support/binaries/oscam-svn11713-arm_dream-webif-dvbapi-libusb-emu798.debug
 STRIP ------>  /home/mahdi-dz/s3/support/binaries/oscam-svn11713-arm_dream-webif-dvbapi-libusb-emu798
 REMOVE ----->  /home/mahdi-dz/s3/support/binaries/oscam-svn11713-arm_dream-webif-dvbapi-libusb-emu798.debug

Display More

Quote from samur

DVB API with ICAM streamrelay support ...

arm & mipsel

please report if it's ok or not

##

Don't forget to change the settings again:

Code

"Decrypt streams -> yes", 
"Embed ECM in stream -> no" 
"Decrypt received streams -> no"

;

Display More

it doesn't work for me , channel opens but constant freezes (openatv 6.4)