OscamEmu (Levi45) Support Thread

There are 396 replies in this Thread which was already clicked 82,194 times. The last Post () by levi45.

    thank you for your file.

    Here is the test:


    ./oscam-1.20_svn11715-798-arm-none-linux-gnueabi-ssl-libusb: error while loading shared libraries: libssl.so.1.1: cannot open shared object file: No such file or directory

    [/share/HDA_DATA/.qpkg/OsCAM/bin] # opkg install libssl.so.1.1

    Unknown package 'libssl.so.1.1'.

    Collected errors:

    * opkg_install_cmd: Cannot install package libssl.so.1.1.

    oscam-1.20_svn11715-798-arm-none-linux-gnueabi-libusb.zip (without libcrypto and ssl)

    thank you but don't work.


    my last oscam :

    oscam-svn11693-dockstar-webif-dvbapi-ssl-libusb-emu798-upx


    Version: oscam-1.20_svn-r11693-798

    Compiler: arm-none-linux-gnueabi-ssl-libusb


    Web interface support: yes

    LiveLog support: yes

    jQuery support intern: yes

    Touch interface support: yes

    SSL support: yes

    DVB API support: yes

    DVB API with AZBOX support: no

    DVB API with MCA support: no

    DVB API with COOLAPI support: no

    DVB API with COOLAPI2 support: no

    DVB API with STAPI support: no

    DVB API with STAPI5 support: no

    DVB API with NEUTRINO support: yes

    DVB API read-sdt charsets: yes

    Irdeto guessing: yes

    Anti-cascading support: yes

    Debug mode: yes

    Monitor: yes

    Loadbalancing support: yes

    Cache exchange support: yes

    Cache exchange AIO support: yes

    CW Cycle Check support: yes

    LCD support: no

    LED support: no

    Clockfix with realtime clock: no

    IPv6 support: no

    Emulator support: yes

    Built-in SoftCam.Key: yes

    camd 3.3x: no

    camd 3.5 UDP: yes

    camd 3.5 TCP: yes

    newcamd: yes

    CCcam: yes

    CCcam share: yes

    gbox: yes

    radegast: yes

    scam: yes

    serial: yes

    constant CW: yes

    Pandora: yes

    ghttp: yes


    Reader support: yes


    Nagra: yes

    Nagra Merlin: yes

    Irdeto: yes

    Conax: yes

    Cryptoworks: yes

    Seca: yes

    Viaccess: yes

    NDS Videoguard: yes

    DRE Crypt: yes

    TONGFANG: yes

    Bulcrypt: yes

    Griffin: yes

    DGCrypt: yes


    cardreader_phoenix: yes

    cardreader_drecas: yes

    cardreader_internal_azbox: no

    cardreader_internal_coolapi: no

    cardreader_internal_coolapi2: no

    cardreader_internal_sci: yes

    cardreader_sc8in1: yes

    cardreader_mp35: yes

    cardreader_smargo: yes (important)

    cardreader_pcsc: no

    cardreader_smartreader: yes (important)

    cardreader_db2com: yes

    cardreader_stapi: no

    cardreader_stapi5: no

    cardreader_stinger: yes

    Edited once, last by Alexs ().

    Thank you but I only need the bin. it's a marv5tel



    Installing enigma2-softcams-oscam-all-images (11.715-emu-r798-arm+mips) to root...

    ==================================================

    Paketsize 3484kb tis to big for your Flashsize 1200kb

    Eklenti boyutu 3484kb Cihazınızda yeterli hafıza yok. Flashsize:1200kb

    Abort Installation

    Kurulum İptal Edildi

    ==================================================

    Üzgünüm, cihazınıza uygun libssl yok :(

    Sorry, your device does not have the proper libssl :(


    *******************************************

    * ..:: A U T H O R ::.. *

    * << audi06_19 >> *

    * ..:: https://dreamosat-forum.com ::.. *

    *******************************************

    Scripti tekrar çalıştırın. libsslx.x.x dosyası depodan yüklendi.

    ==================================================

    Run the script again. The libsslx.x.x file is loaded from the repository.

    Edited once, last by Alexs ().

    Alexs did you try this one oscam-svn11715-arm_dream-webif-dvbapi-ssl-libusb-emu798

    from this thred below

    Post
    RE: OscamEmu For All (by levi45) Download only.
    Compiled by Levi45

    oscam-icam-patch-v7-svn11715-emu

    oscam-svn11715-arm_dream-webif-dvbapi-ssl-libusb-emu798
    oscam-svn11715-dream_arm-webif-dvbapi-ssl-emu798 = PY3 (9) Openpli based images
    oscam-svn11715-dreambox_fpu-webif-dvbapi-ssl-libusb-emu798
    oscam-svn11715-dream_one-webif-dvbapi-ssl-libusb-emu798
    oscam-svn11715-hd51-webif-dvbapi-ssl-libusb-emu798
    oscam-svn11715-Linux-x86_64-webif-dvbapi-ssl-1.1.1f-libusb-emu798
    oscam-svn11715-Linux-x86_64-webif-dvbapi-ssl-1.0.1f-libusb-emu798
    …
    levi45

    I have already tried them and none are compatible with marv5tel.

    I didn't ask you anything in private.
    Unfortunately a bin for marv5tel is never compiled, it is a nas not a decoder.

    Edited once, last by Alexs ().

    Starttime: 31.10.2022 14:53:54

    Version: oscam-1.20_svn-r11686

    Compiler: arm-none-linux-gnueabi-libusb


    this is your :)


    Web interface support: yes

    LiveLog support: yes

    jQuery support intern: yes

    Touch interface support: no

    SSL support: no

    DVB API support: yes

    DVB API with AZBOX support: no

    DVB API with MCA support: no

    DVB API with COOLAPI support: no

    DVB API with COOLAPI2 support: no

    DVB API with STAPI support: no

    DVB API with STAPI5 support: no

    DVB API with NEUTRINO support: no

    DVB API read-sdt charsets: yes

    Irdeto guessing: yes

    Anti-cascading support: no

    Debug mode: yes

    Monitor: yes

    Loadbalancing support: yes

    Cache exchange support: no

    Cache exchange AIO support: no

    CW Cycle Check support: no

    LCD support: no

    LED support: no

    Clockfix with realtime clock: no

    IPv6 support: no



    my last file that i use


    Starttime: 31.10.2022 14:58:34

    Version: oscam-1.20_svn-r11693-798

    Compiler: arm-none-linux-gnueabi-ssl-libusb

    Web interface support: yes

    LiveLog support: yes

    jQuery support intern: yes

    Touch interface support: yes

    SSL support: yes

    DVB API support: yes

    Why some files named with py 3.21? I know it work for 3.12 but why we have this version no which cause confusion?

    coming soon -> openATV 7.4 :thinking face:

    • Official Post

    It is a binary file. The gcc/ssl version is more likely to cause issues than the python version in the image. If you insist on putting the python version in name, ATV 7.4 uses 3.12.3. The python version may be relevant to any cam control scripts/plugin, not the oscam binary.


    Also, can you please stop adding the Icam in name. The Icam patch was added to plain oscam a few months ago. It is included in every version now.

    When i added icam to name i was patching oscam my self . And also when i start name like py2 etc ,etc there was only 3 different py (openssl) version image . So nowadays all change and there is so many different openssl version of image . For example next update i will name like enigma2-plugin-softcams-oscam-emu-ssl-3.9. Hopefully this will stop any confusion.

    Python and SSL are different items.


    The python version should not affect the functionality of the oscam binary. There really is no need to add the python version in name of package. People have different versions of python depending on image. PLi have no intention of going above 3.10. The other images all have different version of python depending on image line. All irrelevant to Oscam.

    Hi sure my friend and yes i do know python and ssl is two different things.Also i know that python not effecting oscam. Only i have named like that from beginning because, say image released as py 3.9 and image used openssl 3.9. So oscam name is py3.9 than they know witch oscam to use. Now obviously not the case any more . i will change oscam name as openssl version in future oscam release .

    • Official Post

    I don't think anybody is up to ssl 3.9 yet. The latest one in ATV 7.4 and other images from update OE-A 5.4 branch is 3.3.0-r0.1 PLI Developer image is using OpenSSL 1.1.1n 15 Mar 2022. I hope you can reconsider adding that number. It does not serve any purpose in my opinion.


    It would be better off adding a check for ssl versions and adding symlinks if required.

Your resource for OSCam-EMU softcam

Find configs, downloads, tutorials, and support for emulation setup, IPTV decoding, and extended protocol support. Master emulation and extended decoding with OSCam-EMU. Access dedicated support, configs, tutorials, and downloads for enhanced IPTV and service access.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login