OscamEmu (Levi45) Support Thread

UPDATE.

I inserted '' connectoninit = 1in the server and I now have pictures.

Thanks a lot for your help. I will play around with it some more and see how it goes.

All good so far.

My next experiment is to see if I can install this oscam on my pc that I have my 0b01 card in. If I am successful I will have all my packs in every part of my house.

UPDATE,

All running ok including my NC 0b01 internal card, however it is not saving any emms to my card . I don't know what I am doing wrong. Any suggestions would be a great help. Box is parked on the normal TVP1 HD channel that updates the emms ?????.

Check if you have AU enable on dvbapi

au = 1

Thanks Muaitai,

I need to try to get the concept into my (old) head. I did this many years ago but I cannot remember how I got it working back then. My stb is running on oscam and my PC is running oscam also.

I need the stb which is always connected to a dish to send the emms to my PC which has the card in its smargo. Do I need the following.

In the STB.

User ?????

config ?????

In the PC.

User ???????

config ????.

Ah ok.

What I've posted above it was for local card update., using stb oscam dvbapi.

What you need is to setup on the PC side for the stb user this:

PC oscam.user:

[account]

user = 1234

pwd = abcd

au = NAME OF THE READER WHERE'S THE CARD

group = 1,2,20

https://wiki.streamboard.tv/wiki/OSCam/en/Config/oscam.user#au

Thank you,

I will try later.

Do I not have to let the stb know the ip address of my pc ???.

Quote from hs5424

Thank you,

I will try later.

Do I not have to let the stb know the ip address of my pc ???.

Thats on the stb oscam.server, where you setup the reader

Hi,

Thanks for your reply.

Running into a brick wall here.

If I can get an example of what I need on the stb connected to dish

and,

an example of what I need on the PC running the card.

I need to get my head around what is needed on both machines.

Hi sorry to be a pain but could someone please advise what file to use for zgemma HS7

and latest openvix image i keep trying different files and no go thanks

Quote from telstar

Hi sorry to be a pain but could someone please advise what file to use for zgemma HS7

and latest openvix image i keep trying different files and no go thanks

Better to use ipk file post above

Quote from telstar

Hi sorry to be a pain but could someone please advise what file to use for zgemma HS7

and latest openvix image i keep trying different files and no go than

I do not have zgemma, but according to this Vix, you should use the 1st one from the list, then I would go with "multi" file.

Quote from W@Rp

Compiled by Levi45

Oscam icam patch 11828 with emu r802 ipk/deb for all e2/sh4 boxes and images

Oscam-icam-patch-git11828-emu802

Thanks Levi45

Display More

The mipsel bin inside the ipk still 11827

hi, where can download for pcsc protocol for ubuntu?

how istall latest oscam version in my vu+ zero 4k ? forever install in .ipk file , but i dont see ipk in the latest version. thanks

I have the same file oscam levi45 11828 visible only config in etc/tuxbox

I have install oscam 11825 levi45 but no open channel. In past time install oscam levi45 and i open channels also. I dont found the problem

Thanks @levi45 , “OSCam_11838-802-aarch64-ssl310” this version works perfectly with Tvheadend on CoreELEC aarch64 system.

Quote from levi45

Compiled by Levi45

satellite-forum.com

Oscam icam patch 11845 with emu r802 ipk/deb for all e2/sh4 boxes and images

Thanks levi45

Your work is awesome, can you please update the version in multicammanager, it is still 11842

Regards

Quote from Mahmoud Hussein

Quote from levi45

Compiled by Levi45

satellite-forum.com

Oscam icam patch 11845 with emu r802 ipk/deb for all e2/sh4 boxes and images

Thanks levi45

Your work is awesome, can you please update the version in multicammanager, it is still 11842

Regards

Display More

Updated