OscamEmu (Levi45) Support Thread

**levi45** · Jan 19th 2026

For now don't enable cccam reader it blocks webif so if this is the case disable cccam reader from config file restart your oscam then it should back to normal . Or just send this oscam.conf file to your box restart your oscam .

pirobi1 · Jan 19th 2026

Quote from levi45

For now don't enable cccam reader it blocks webif so if this is the case disable cccam reader from config file restart your oscam then it should back to normal . Or just send this oscam.conf file to your box restart your oscam .

Dear Levi45

I have my own config file.

What should I copy from yours to mine to make OScam work 11936

pirobi1 · Jan 19th 2026

Dear Levi45

I have my own config file.

What should I copy from yours to mine to make OScam work 11936

**levi45** · Jan 19th 2026

Quote from pirobi1

Dear Levi45

I have my own config file.
What should I copy from yours to mine to make OScam work 11936

find this line on your oscam.conf file

Quote

cccam_cfg_enabled = 1

cccam_cfg_path = /etc/tuxbox/config

cccam_cfg_save = 1

cccam_cfg_repetitions_forced = 1

cccam_cfg_reconnect_delay = 90

cccam_cfg_reconnect_attempts = 10

Display More

replace with this

Quote

cccam_cfg_enabled = 0

cccam_cfg_path = /etc/tuxbox/config

cccam_cfg_save = 1

cccam_cfg_repetitions_forced = 1

cccam_cfg_reconnect_delay = 90

cccam_cfg_reconnect_attempts = 10

Display More

**levi45** · Jan 19th 2026

Quote from ocs

If possible, brother, I need your latest working VPS version on Ubuntu 24.04. Thank you.

this should work for you my friend

**levi45** · Jan 19th 2026

Quote from Mahmoud Hussein

Quote from levi45

Quote from digidany

levi45

I just changed on my DM920 from Oscam 11906 by deepblue2000 to your 11906 (OSCam_11906-803-arm-ssl102)
and Tivusat EMM runs great! Thank you!

Unfortunately the emu for AFN (9 East) and ANT1Europe (Viaccess 9 East) are not working with your version.
Do I need to activate anything in your Webinterface?

When I switch back to 11906 by deepblue2000 both are working again.

Please help me to solve the problem. Thank you!

Display More
For me without doing anything works fine with correct keys
1.jpg

Display More
Would you please revise the telnet command? It is not working for me

Display More

command is the same my friend

Code

wget -q "--no-check-certificate" https://raw.githubusercontent.com/levi-45/Levi45Emulator/main/installer.sh -O - | /bin/sh

michel30 · Jan 19th 2026

Quote from smausi11

Could you please provide a link from Mohamed? Thanks

Thread

Latest OscamEmu For ALL Images Mips Arm Sh4 IPK - DOWNLOAD ONLY NO CHAT

OSCam ALL Images mips - arm - sh4

IMAGES LIST ::

#### OE2.5 IMAGES ##### DreamOSat camManager
Gemini GP3 image
OoZooN image
newnigma2 image
Dream-Elite OE2.5 image
SatLodge image
PeterPan image
TDW image
OpenTS/Ts image

#### OE2.0 IMAGES ##### DreamOSat camManager
Gemini GP3 image
OoZooN image
newnigma2 image
OpenTS/Ts image
Merlin3 image
Dream-Elite image
SatLodge image
PeterPan image
VTI image
Blackhole image
teamBlue image
NonSoloSat image
DDD-Demoni image
Domica image
LT image
TDW

…

MOHAMED_OS

Jun 10th 2020

michel30 · Jan 19th 2026

Quote from levi45

For now don't enable cccam reader it blocks webif so if this is the case disable cccam reader from config file restart your oscam then it should back to normal . Or just send this oscam.conf file to your box restart your oscam .

Hi,
Yes it is working again.

**Mahmoud Hussein** · Jan 20th 2026

Quote from levi45
Quote from Mahmoud Hussein

Quote from levi45

Quote from digidany

levi45

I just changed on my DM920 from Oscam 11906 by deepblue2000 to your 11906 (OSCam_11906-803-arm-ssl102)
and Tivusat EMM runs great! Thank you!

Unfortunately the emu for AFN (9 East) and ANT1Europe (Viaccess 9 East) are not working with your version.
Do I need to activate anything in your Webinterface?

When I switch back to 11906 by deepblue2000 both are working again.

Please help me to solve the problem. Thank you!

Display More
For me without doing anything works fine with correct keys
1.jpg

Display More
Would you please revise the telnet command? It is not working for me

Display More

command is the same my friend
Code
wget -q "--no-check-certificate" https://raw.githubusercontent.com/levi-45/Levi45Emulator/main/installer.sh -O - | /bin/sh 
Display More

root@sf8008:~# wget -q "--no-check-certificate" https://raw.githubusercontent.…mulator/main/installer.sh -O - | /bin/sh

Detected OS: Enigma2

Downloading version 11936...

Installing...

error: pkg_init_from_file: Malformed package file /tmp/enigma2-plugin-softcams-oscam-emu-levi45_11936-803_all.ipk.

Installation completed successfully!

Please Restart GUI...

root@sf8008:~#

**levi45** · Jan 20th 2026

Quote from Mahmoud Hussein
Quote from levi45
Quote from Mahmoud Hussein

Quote from levi45

Quote from digidany

levi45

I just changed on my DM920 from Oscam 11906 by deepblue2000 to your 11906 (OSCam_11906-803-arm-ssl102)
and Tivusat EMM runs great! Thank you!

Unfortunately the emu for AFN (9 East) and ANT1Europe (Viaccess 9 East) are not working with your version.
Do I need to activate anything in your Webinterface?

When I switch back to 11906 by deepblue2000 both are working again.

Please help me to solve the problem. Thank you!

Display More
For me without doing anything works fine with correct keys
1.jpg

Display More
Would you please revise the telnet command? It is not working for me

Display More

command is the same my friend
Code
wget -q "--no-check-certificate" https://raw.githubusercontent.com/levi-45/Levi45Emulator/main/installer.sh -O - | /bin/sh 
Display More
root@sf8008:~# wget -q "--no-check-certificate" https://raw.githubusercontent.…mulator/main/installer.sh -O - | /bin/sh
Detected OS: Enigma2
Downloading version 11936...
Installing...
error: pkg_init_from_file: Malformed package file /tmp/enigma2-plugin-softcams-oscam-emu-levi45_11936-803_all.ipk.
Installation completed successfully!
Please Restart GUI...
root@sf8008:~#
Display More

Witch image version and Witch box please thanks .

**levi45** · Jan 20th 2026

Quote from ocs

Good morning, everyone. I need a working, up-to-date VPS version running Ubuntu 24.04. Thank you. levi45

Posted 5/6 message above not working?

**Mahmoud Hussein** · Jan 21st 2026

Quote from levi45
Quote from Mahmoud Hussein
Quote from levi45
Quote from Mahmoud Hussein

Quote from levi45

Quote from digidany

levi45

I just changed on my DM920 from Oscam 11906 by deepblue2000 to your 11906 (OSCam_11906-803-arm-ssl102)
and Tivusat EMM runs great! Thank you!

Unfortunately the emu for AFN (9 East) and ANT1Europe (Viaccess 9 East) are not working with your version.
Do I need to activate anything in your Webinterface?

When I switch back to 11906 by deepblue2000 both are working again.

Please help me to solve the problem. Thank you!

Display More
For me without doing anything works fine with correct keys
1.jpg

Display More
Would you please revise the telnet command? It is not working for me

Display More

command is the same my friend
Code
wget -q "--no-check-certificate" https://raw.githubusercontent.com/levi-45/Levi45Emulator/main/installer.sh -O - | /bin/sh 
Display More
root@sf8008:~# wget -q "--no-check-certificate" https://raw.githubusercontent.…mulator/main/installer.sh -O - | /bin/sh
Detected OS: Enigma2
Downloading version 11936...
Installing...
error: pkg_init_from_file: Malformed package file /tmp/enigma2-plugin-softcams-oscam-emu-levi45_11936-803_all.ipk.
Installation completed successfully!
Please Restart GUI...
root@sf8008:~#
Display More
Witch image version and Witch box please thanks .
Display More

Openatv 7.6

Octagon sf8008

**levi45** · Jan 23rd 2026

Quote from Mahmoud Hussein
Quote from levi45
Quote from Mahmoud Hussein
Quote from levi45
Quote from Mahmoud Hussein

Quote from levi45

Quote from digidany

levi45

I just changed on my DM920 from Oscam 11906 by deepblue2000 to your 11906 (OSCam_11906-803-arm-ssl102)
and Tivusat EMM runs great! Thank you!

Unfortunately the emu for AFN (9 East) and ANT1Europe (Viaccess 9 East) are not working with your version.
Do I need to activate anything in your Webinterface?

When I switch back to 11906 by deepblue2000 both are working again.

Please help me to solve the problem. Thank you!

Display More
For me without doing anything works fine with correct keys
1.jpg

Display More
Would you please revise the telnet command? It is not working for me

Display More

command is the same my friend
Code
wget -q "--no-check-certificate" https://raw.githubusercontent.com/levi-45/Levi45Emulator/main/installer.sh -O - | /bin/sh 
Display More
root@sf8008:~# wget -q "--no-check-certificate" https://raw.githubusercontent.…mulator/main/installer.sh -O - | /bin/sh
Detected OS: Enigma2
Downloading version 11936...
Installing...
error: pkg_init_from_file: Malformed package file /tmp/enigma2-plugin-softcams-oscam-emu-levi45_11936-803_all.ipk.
Installation completed successfully!
Please Restart GUI...
root@sf8008:~#
Display More
Witch image version and Witch box please thanks .
Display More
Openatv 7.6
Octagon sf8008
Display More

this is from octagon sf8008 and openatv 7.6

Code

root@sf8008:~# wget -q "--no-check-certificate" https://raw.githubusercontent.com/levi-45/Levi45Emulator/main/installer.sh -O - | /bin/sh 
Detected OS: Enigma2
Downloading version 11936...
Installing...
Installing enigma2-plugin-softcams-oscam-emu-levi45 (11936) on root
OE2.0 IMAGES: libssl3
OE2.0 IMAGES: libcrypto3
OE2.0 IMAGES: glibc 2.42+git
Configuring enigma2-plugin-softcams-oscam-emu-levi45.
<--------------------------------------------->
:Checking your device processor ...
:Your Device IS ARM processor ...
openATV image
<--------------------------------------------->
:Installing fresh OSCam config files (only if they don't exist)...
  Installed: oscam.conf
  Installed: oscam.dvbapi
  Installed: oscam.provid
  Installed: oscam.server
  Installed: oscam.services
  Installed: oscam.user
  Installed: CCcam.cfg
  Installed: AutoRoll.Key
  Installed: constant.cw
  Installed: oscam.fs
  Installed: oscam.srvid2
  Installed: SoftCam.Key
<--------------------------------------------->


-------------------------------------------------------
* Oscam Config & Softcam files in [/etc/tuxbox/config] *
-------------------------------------------------------


*******************************************
*             Install Finished            *
*                                         *
*         Need To Restart Enigma2         *
*                                         *
*             Compiled By Levi45          *
*                                         *
*******************************************
Installation completed successfully!
Please Restart GUI...
root@sf8008:~#

Display More

Lomaks · Jan 25th 2026

The latest version (11939) doesn't work on DreamOS DM520.
The previous version (11936) works well.

Code

error while loading shared libraries: libssl.so.1.0.2: cannot open shared object file: No such file or directory

**kalkan99** · Jan 25th 2026

My device is a DreamBox 920 with Merlin software installed.

My question is: "OSCam_1193x-803-arm-ssl102" is a constantly working model in your Oscam version, but it could not be activated this time.

**kalkan99** · Jan 25th 2026

Dear levi45,

Is there any progress regarding the check and correction of the "arm ssl 102" that we reported as problematic?

**levi45** · Jan 25th 2026

can you try this please

**kalkan99** · Jan 25th 2026

The same problem persists in the latest test file as well.

**kalkan99** · Jan 26th 2026

The problem persists with the latest version 11940 Oscam.

DreamBox 920 OE 2.5 does not work with Merlin software.

**levi45** · Jan 26th 2026

Quote from kalkan99

The problem persists with the latest version 11940 Oscam.
DreamBox 920 OE 2.5 does not work with Merlin software.

Whats is your openssl version ? and your dreambox is just arm boxes is in it ?

OscamEmu (Levi45) Support Thread

Your resource for OSCam-EMU softcam

Participate now!

Share