DM7080 get error install any img

There are 10 replies in this Thread which was already clicked 1,701 times. The last Post () by monuser.

    Hi, i got everytime a problem when i try install a img on 7080 (openpli-11.3-dm7080-original-20220719) or pure2-6.2-dm7080hd-20221005)


    if i make online restore orig image is working fine.


    any tipp how i can solve this issue


    thanks a lot

    I have the same problems on the 820 (according to the characteristics of the same as the 7080, only in a smaller case) with some openpli-type images compiled by private users, try another browser, on the 10th attempt I managed to install open pli 11.2-type images into the 820 receiver. good luck


    so now I tried to install the pli 11.3 image, according to the installation log, the image seems to have been installed, but the log is not completed, I clicked on reboot, the receiver does not start. I have already switched the receiver to firmware mode and have already selected an image that is stable and correctly installed (as can be seen from the installation log), I install, but I do not click rebut and in the browser I register the IP address again, and the window for firmware opens, and then I select pli11.3 and install, the image in the installation log was installed incorrectly, but I already click on the reboot and, Lo and behold, the image is launched and the main image settings appear.. this is the way I found for myself, which I share with you, but I warn you that everything you do, you do at your own risk. good luck!!!

    I have the same problem with DM 7080HD with Openatv 7.6, I can not make an update, neither online nor web interface of Openatv.

    It is happened when I try to install in multiboot sector, (of Openatv), an Openpli image. Now I need every time to install first a not multiboot image of Openatv (exp. 5.1), and after that install online only a clear image of Openatv 7.6. Of course I can not use more a multiboot of Openatv.


    I think it is needed to updating rescue loader of 7080HD, but I don't know how...any help

    Hi


    Dreambox

    DM7080HD


    1-First, you must send the basic image of the receiver.


    https://dreamboxupdate.com/opendreambox/2.5/unstable/images/dm7080/dreambox-image-deb-dm7080-20211029.tar.xz


    2- After that, I updated the ---- vmlinux.gz-rescue-3.4-r1-dm7080-20201201.bin.


    https://dreamboxupdate.com/opendreambox/2.5/unstable/images/dm7080/vmlinux.gz-rescue-3.4-r1-dm7080-20201201.bin


    How to update the ---- vmlinux.gz-rescue-3.4-r1-dm7080-20201201.bin


    Open the program on your computer dcc -the ftp Open folder tmp - then send the file -- vmlinux.gz-rescue-3.4-r1-dm7080-20201201.bin


    Select a feature in the program Telnet - then give him this code


    Code
    flash-rescue /tmp/*.bin

    I once tried the OATV multiboot on the dm920 and it only did damage, causing me to lose all the files I had in the partition/date. I was driven to try because Gutemine had emptied his GM3 feed and Alan Turing was no longer working. I also did an online recovery of the original image, then deleted all the linuxrootfs folders that had been created on/data. Now I'm using Alan Turing again, where I can also install Open images on the SD.


    The advice I would like to give is to install an original flash image and install Barry Allen's version 12.92 from the GM3 feed, which would allow you to install Open images on an SD as well.

    Instructions for installing BA 12.92 can be found at the link:

    gutemine's attic Q&A - Dreambox Forum
    Hi, nachdem die Leute langsam drauf kommen, dass ich dabei bin sozusagen meinen Dachboden leer zu räumen und Legacy Editions einiger meiner neuen und alten…
    dreambox.de

    This version of BA can be used on dm7080, dm820 and dm52x.

    Edited once, last by disa51 ().

    After sending the code, I receive:

    Fatal: Unsupported machine!

    Edited once, last by ras ().

    Post
    RE: DM7080 get error install any img
    Hi


    Dreambox
    DM7080HD


    1-First, you must send the basic image of the receiver.


    https://dreamboxupdate.com/ope…eb-dm7080-20211029.tar.xz


    2- After that, I updated the ---- vmlinux.gz-rescue-3.4-r1-dm7080-20201201.bin.


    https://dreamboxupdate.com/ope….4-r1-dm7080-20201201.bin


    How to update the ---- vmlinux.gz-rescue-3.4-r1-dm7080-20201201.bin


    Open the program on your computer dcc -the ftp Open folder tmp - then send the file -- vmlinux.gz-rescue-3.4-r1-dm7080-20201201.bin


    Select a feature in the…
    monuser

Firmware, downloads and support for Dreambox DM7080 HD.

Your community resource for the Dreambox DM7080 HD satellite receiver — firmware images, channel lists, plugins and setup help.