bmediacenter works fine but it is complicated and mediaplayer was workin fine before this update
I hope you fix it
bmediacenter works fine but it is complicated and mediaplayer was workin fine before this update
I hope you fix it
Sorry, but i am not able to fix it,I can only write here,that this Plugin have no more support,so no fixes.
Thank you
so it is time to use another image
Hi anyone know how or if there is a way to change the number of restarts shown in information about openATV mine has reached a high number of restarts and would like to somehow reset the numbers ?
Is it config.misc.startCounter at settings ?
Telnet INIT 4 -> change value -> save -> restart
stuso147 , and Orlandox mines is sitting at 1301 :) on information screen I normally just do flash online to update to newer builds with restore settings .
so would new flash without restoring settings remove that.
OK just had a look at etc/enigma2 settings file I do see the entry in there,
config.misc.startCounter=1300 can you comment out entries in settings file i,e, with example # config.misc.startCounter=1300
I will just remove entry from settings file to see what happens I do have a Backup settings file from today.
Edit ok
did init 4
and edited to
# config.misc.startCounter=1300
and entered reboot
config.misc.startCounter was not in settings file but I then did deep standbye and started stb
I now have entry
config.misc.startCounter=1
After install and install some plugin my mutant hd51 reboot and after this i search to install others plugin but i recevie always this error
opkg_lock: Could not lock /run/opkg.lock: Resource temporarily unavailable.
opkg_com_exec: Command failed to capture privilege lock: Resource temporarily unavailable.
Esecuzione Teminata
The network run fine and and really dont know how solve it
Thank
Hispa
Display Morestuso147 , and Orlandox mines is sitting at 1301 :) on information screen I normally just do flash online to update to newer builds with restore settings .
so would new flash without restoring settings remove that.
OK just had a look at etc/enigma2 settings file I do see the entry in there,
config.misc.startCounter=1300 can you comment out entries in settings file i,e, with example # config.misc.startCounter=1300
I will just remove entry from settings file to see what happens I do have a Backup settings file from today.
Edit ok
did init 4
and edited to
# config.misc.startCounter=1300
and entered reboot
config.misc.startCounter was not in settings file but I then did deep standbye and started stb
I now have entry
config.misc.startCounter=1
Hi Urie I tried what youve done but no still the same and count has gone up are you running 7.2 ?
Display MoreDisplay Morestuso147 , and Orlandox mines is sitting at 1301 :) on information screen I normally just do flash online to update to newer builds with restore settings .
so would new flash without restoring settings remove that.
OK just had a look at etc/enigma2 settings file I do see the entry in there,
config.misc.startCounter=1300 can you comment out entries in settings file i,e, with example # config.misc.startCounter=1300
I will just remove entry from settings file to see what happens I do have a Backup settings file from today.
Edit ok
did init 4
and edited to
# config.misc.startCounter=1300
and entered reboot
config.misc.startCounter was not in settings file but I then did deep standbye and started stb
I now have entry
config.misc.startCounter=1
Hi Urie I tried what youve done but no still the same and count has gone up are you running 7.2 ?
openatv 7.1 and 7.2 yes counter does still go up but it did start at 1 sitting at 13 at the moment been messing about updating and making backups
Display MoreDisplay MoreDisplay Morestuso147 , and Orlandox mines is sitting at 1301 :) on information screen I normally just do flash online to update to newer builds with restore settings .
so would new flash without restoring settings remove that.
OK just had a look at etc/enigma2 settings file I do see the entry in there,
config.misc.startCounter=1300 can you comment out entries in settings file i,e, with example # config.misc.startCounter=1300
I will just remove entry from settings file to see what happens I do have a Backup settings file from today.
Edit ok
did init 4
and edited to
# config.misc.startCounter=1300
and entered reboot
config.misc.startCounter was not in settings file but I then did deep standbye and started stb
I now have entry
config.misc.startCounter=1
Hi Urie I tried what youve done but no still the same and count has gone up are you running 7.2 ?
openatv 7.1 and 7.2 yes counter does still go up but it did start at 1 sitting at 13 at the moment been messing about updating and making backups
Got my h7s running sweet with everything i need just would like to reset the number then make a settings backup if i want to do a full reflash again. Although maybe just dont go into information and have a look at the large number of restarts LOL Could it be becausw im using filezilla to change the setting and it doesnt work that way?
Display MoreDisplay MoreDisplay MoreDisplay Morestuso147 , and Orlandox mines is sitting at 1301 :) on information screen I normally just do flash online to update to newer builds with restore settings .
so would new flash without restoring settings remove that.
OK just had a look at etc/enigma2 settings file I do see the entry in there,
config.misc.startCounter=1300 can you comment out entries in settings file i,e, with example # config.misc.startCounter=1300
I will just remove entry from settings file to see what happens I do have a Backup settings file from today.
Edit ok
did init 4
and edited to
# config.misc.startCounter=1300
and entered reboot
config.misc.startCounter was not in settings file but I then did deep standbye and started stb
I now have entry
config.misc.startCounter=1
Hi Urie I tried what youve done but no still the same and count has gone up are you running 7.2 ?
openatv 7.1 and 7.2 yes counter does still go up but it did start at 1 sitting at 13 at the moment been messing about updating and making backups
Got my h7s running sweet with everything i need just would like to reset the number then make a settings backup if i want to do a full reflash again. Although maybe just dont go into information and have a look at the large number of restarts LOL Could it be becausw im using filezilla to change the setting and it doesnt work that way?
Urie well done i tried again using telnet init4 and this time its worked thank you !!
I often get a blue screen when I change channels, what can cause this problem?
Thank you
Are this Tivusat Channels? Because this problem write some user's. Problem is, not all have this crashes, for example here no problems with it.
Unable to set poster pull location for x poster
Hi everyone
My box dinobot 4k se / u5pver/ferguson 4k pvr after flashing openatv 7.2 on the external flash the problem is:
the remote not working only control the image with openweif RC ,the tv channels , movies on IP e2 player not working , I need to switch my tv off/on to display the image , no boot logo
I sent to the teem the enigma 2 log file nothing done ,here attached
now the point I used neoboot multiboot to install the image on the external flash
Are this Tivusat Channels? Because this problem write some user's. Problem is, not all have this crashes, for example here no problems with it.
Hi dear, everyone has the problem, because it exists and it is difficult to find, it occurs sporadically, on some TivuSat channels and on all boxes, not only on OpenAtv, we also in Egami, PurE2 and I have not tested other images.
Yes,but I don´t understand it too,why it crashs only with Tivusat channels and why only here on py3 Images.
I can confirm that , on my Zgemma H9s and Miraclebox Miniplus it happens quite often zapping from Rai to Mediaset channels (Rete4, Cine34) seldom on SF8008 Octagon, on OpenATV 7.2!
Strange is it too,that the crash comes only,when the Tivusat card are on the receiver,if I try with Homesharing on a other receiver,there are no problems with crashes.
Strange is it too,that the crash comes only,when the Tivusat card are on the receiver,if I try with Homesharing on a other receiver,there are no problems with crashes.
It also does it on sharing, I repeat, not always!
Very strange
Don’t have an account yet? Register yourself now and be a part of our community!