Auto Update for the AFN Channels

Iam also here to seek help to the autoupdate softcam keys in enigma2,hope to hear from members

I can tell you that au works on 99w for AFN, so its possible.

Which softcam keys are you using?

Quote from saayacoolu

Which softcam keys are you using?

My keys are comprised of around 4 different key files.

of which u can name them

Quote from saayacoolu

of which u can name them

My keys are for North America. I'm guessing they won't do you much good. But a few files can be found in this thread Softcam.Key Enigma2 for American Satellites. You should look at the Softcam Keys Group, im sure you'll find something in there.

With VU+Zero and VTI 15.0.02, and with OSCAM_11.718-r798 (which I have on board for TIVUSAT) it works without adding anything else.

The channels are those found on 9°E

[reader]

label = AFN

description = AFN-EMU

protocol = emu

device = Emulator

services = afn it will look for this as it needs it

cacheex = 1

cacheex_maxhop = 1

cacheex_allow_request = 1

caid = 0E00

detect = cd

group = 1

emmcache = 1,5,31,1

emu_auproviders = 0E00:000000

auprovid = 000E00

au in minutes,sometimes seconds just wait

Hi, tested with an oscam emu and it doesn't work, there must be something else, your version of oscam and maybe the config and a softcam keys.....

latest oscam emu and softcam keys for all

and put this in oscam.services

[afn]

caid = 0E00

provid = 000000

srvid = 0066,0067,0068,0069,006A,006B,006C,006D,004A,0015,0016,0018, 0019,0047,0048,0049,004B,004C,000B,0004,0008,000C,000D,000F, 001E,0029,002A,002B,0070

kashmir, be patient, after about 9 minutes the channels open!

Sorry, nothing for me after more 20 minutes.....

stay to afn prime atlantic

Yes it's nice, ok with prime atlantic since 10 minutes....thank's a lot firiend....

being so luck to have it on iam still struggling to put it on,will feed back if done

sorry i have not ask of which image u are using?

I installed on VU+Zero a clean image (OpenPLI 8.3) and with OSCAM_11.718-r798, without adding anything, and all ok without even waiting!

Channels are on 9°E FREQUENCY 11804v27500 2/3 DVB-S2/8PSK

Good to hear that.Happy viewing but on my receiver is hdmu enigma2

Quote from Batroc

I installed on VU+Zero a clean image (OpenPLI 8.3) and with OSCAM_11.718-r798, without adding anything, and all ok without even waiting!

Channels are on 9°E FREQUENCY 11804v27500 2/3 DVB-S2/8PSK

That's because you reading keys via internet not auto updating the keys.

Quote from levi45

Quote from Batroc

I installed on VU+Zero a clean image (OpenPLI 8.3) and with OSCAM_11.718-r798, without adding anything, and all ok without even waiting!

Channels are on 9°E FREQUENCY 11804v27500 2/3 DVB-S2/8PSK

That's because you reading keys via internet not auto updating the keys.

Thanks for the clarification, but this is done through the Oscam? Because if the block doesn't work anymore but I don't understand why if I disconnect the network the decoder continues to work!