OScamicam_117xx_Vx_Vx_kitte888_Vx_Revision_All ipk & Settings- Not for UK

Quote from Mahmoud Hussein

Quote from acypaczom

Quote from Mahmoud Hussein

I don't know how to use it with kitte888 cam, can you advise?

i wrote a simple script that converts this ccccam.cfg to oscam.server.

All You have to do is to change bit to executable of script.

by default ccccam.cfg and generated oscam.server are located in same directory

it can be modified

for example if you have /etc/tuxbox/config/oscam folder you may change

output_oscam_server=oscam.server
input_cccam_config="cccam.cfg"

to

output_oscam_server=/etc/tuxbox/config/oscam/oscam.server

input_cccam_config=/etc/tuxbox/config/oscam/cccam.cfg

before creating oscam.server existing one is copied to same name with date at the end , to secure misstakes of overwriting sensitive data ;-)

Oscam server has to be restarted

EDIT: V2 version uloaded. it contain draft_oscam_server variabe. It is location of oscam.server data you would like to have included in generated oscam.server (for example local cards definitions)

PS: IT OVERWRITES EXISTING oscam.server !!!!!

Display More

acypaczom

Appreciate your time to generate the script attached above, it work very good but it solve half of the mession,

Attached my cccam.cfg file, please have a look on the urls listed in last part of it, by placing this urls in cccam.cfg, in combination of oscam, it will generate automatically a new valid user & password cccam account, and renew it automatically,

Your nice script looking for C: lines but couldn't handle this urls, for this reason I asked kitte888 to add support for it.

If you want to understand how this urls work, you can install Mohamed_OS cam and place it in config folder, then restart your newly installed cam, you will see the cccam account automatically generated and renewed on daily base.

Again appreciate your help and support

Display More

it also can be written

Every time the decoder is restarted I have to restart oscam.

How do I uninstall all Oscam and install all new ?

Quote from Azzurra

Every time the decoder is restarted I have to restart oscam.

How do I uninstall all Oscam and install all new ?

fist check packages

opkg list-installed |grep oscam 

then remove packages that look like oscam

opkg remove package_name_showed_in_previous_result

as i have written, works for me (arm/mipsel OATV 7.3 ) . I took binaries to my plugin, and can install, upgrade even switch between other authors

Quote from kitte888

why don't you use mohammed's cam

I don't have the source to install cccam

or install mine and his cam

I used both Mohamed'S cam and yours but yours faster in icam channel opening plus I didn't use cccam for this urls, only oscam,

Anyway it was option to add if you can,

Regards

Quote from acypaczom

Quote from Mahmoud Hussein

Quote from acypaczom

Quote from Mahmoud Hussein

I don't know how to use it with kitte888 cam, can you advise?

i wrote a simple script that converts this ccccam.cfg to oscam.server.

All You have to do is to change bit to executable of script.

by default ccccam.cfg and generated oscam.server are located in same directory

it can be modified

for example if you have /etc/tuxbox/config/oscam folder you may change

output_oscam_server=oscam.server
input_cccam_config="cccam.cfg"

to

output_oscam_server=/etc/tuxbox/config/oscam/oscam.server

input_cccam_config=/etc/tuxbox/config/oscam/cccam.cfg

before creating oscam.server existing one is copied to same name with date at the end , to secure misstakes of overwriting sensitive data ;-)

Oscam server has to be restarted

EDIT: V2 version uloaded. it contain draft_oscam_server variabe. It is location of oscam.server data you would like to have included in generated oscam.server (for example local cards definitions)

PS: IT OVERWRITES EXISTING oscam.server !!!!!

Display More

acypaczom

Appreciate your time to generate the script attached above, it work very good but it solve half of the mession,

Attached my cccam.cfg file, please have a look on the urls listed in last part of it, by placing this urls in cccam.cfg, in combination of oscam, it will generate automatically a new valid user & password cccam account, and renew it automatically,

Your nice script looking for C: lines but couldn't handle this urls, for this reason I asked kitte888 to add support for it.

If you want to understand how this urls work, you can install Mohamed_OS cam and place it in config folder, then restart your newly installed cam, you will see the cccam account automatically generated and renewed on daily base.

Again appreciate your help and support

Display More

it also can be written

Display More

Let me check again, may be I made a mistake, I will revert back to you.

Thanks for your help

Quote from acypaczom

Quote from Azzurra

Every time the decoder is restarted I have to restart oscam.

How do I uninstall all Oscam and install all new ?

fist check packages

Code

opkg list-installed |grep oscam 

then remove packages that look like oscam

Code

opkg remove package_name_showed_in_previous_result

as i have written, works for me (arm/mipsel OATV 7.3 ) . I took binaries to my plugin, and can install, upgrade even switch between other authors

Display More

Which oscam are you using ?

I installed emu and icam from feeds and they don't start automatically.

tested . both works, it just asks for symlink to ssl 0.98, if it is created works same on mips and arm.

but reverted mips to v11 , because of some overflows.

Azzurra as i wrote previously i use jej@on/kitte888/samur for tests. All can be upgraded using s4aupdater .

if you would like to have it autostarted it is required to have symlink (softcam) linked to oscam start script located in /etc/init.d which is also symlinked to /etc/rc3.d/S55softcam

You may try plugin to make it for you, but first backup your oscam data.

Quote from acypaczom

Quote from Mahmoud Hussein

Quote from acypaczom

Quote from Mahmoud Hussein

I don't know how to use it with kitte888 cam, can you advise?

i wrote a simple script that converts this ccccam.cfg to oscam.server.

All You have to do is to change bit to executable of script.

by default ccccam.cfg and generated oscam.server are located in same directory

it can be modified

for example if you have /etc/tuxbox/config/oscam folder you may change

output_oscam_server=oscam.server
input_cccam_config="cccam.cfg"

to

output_oscam_server=/etc/tuxbox/config/oscam/oscam.server

input_cccam_config=/etc/tuxbox/config/oscam/cccam.cfg

before creating oscam.server existing one is copied to same name with date at the end , to secure misstakes of overwriting sensitive data ;-)

Oscam server has to be restarted

EDIT: V2 version uloaded. it contain draft_oscam_server variabe. It is location of oscam.server data you would like to have included in generated oscam.server (for example local cards definitions)

PS: IT OVERWRITES EXISTING oscam.server !!!!!

Display More

acypaczom

Appreciate your time to generate the script attached above, it work very good but it solve half of the mession,

Attached my cccam.cfg file, please have a look on the urls listed in last part of it, by placing this urls in cccam.cfg, in combination of oscam, it will generate automatically a new valid user & password cccam account, and renew it automatically,

Your nice script looking for C: lines but couldn't handle this urls, for this reason I asked kitte888 to add support for it.

If you want to understand how this urls work, you can install Mohamed_OS cam and place it in config folder, then restart your newly installed cam, you will see the cccam account automatically generated and renewed on daily base.

Again appreciate your help and support

Display More

it also can be written

Display More

This is the log of process,

I honestly thing this thread should be changed to for DE only

Quote from wald izk

not working on openatv7.3 VUZERO4K

Code

/usr/bin/oscamicam: symbol lookup error: /usr/bin/oscamicam: undefined symbol: SSL_load_error_strings                           

dinobot 4k mini - atv 7.4 devel

no work same message

ich habe doch schon gesagt das noch ein fehler drin ist und ich eine neue mache , warum wartet ihr nicht

A don tok se mistek stil de en a go mek nyu wan, wetin mek yu no wet

ja deutsch wäre besser

Quote from kitte888

ich habe doch schon gesagt das noch ein fehler drin ist und ich eine neue mache , warum wartet ihr nicht

A don tok se mistek stil de en a go mek nyu wan, wetin mek yu no wet

ja deutsch wäre besser

dieser version unter VTI mit Duo4K promlemlos..! Dankeschön im voraus..

this version under VTI with Duo4K without any problems..Thank you in advance..

hey,.hab mit meiner vu+ zero auch keine probleme nutze 1.7 icam und kitte interface..umschaltzeiten sind der hammer.

Quote from Mahmoud Hussein

Quote from acypaczom

Quote from Mahmoud Hussein

it also can be written

This is the log of process,

You probably did not understand what i wrote. It can be done, measns that i will write for this specific use.

Here it is, works and downlaods data to oscam format. Now You can give kitte888 peace ;-)

convert_ccc_list_to_oscam_format.sh

we send this file to where again thank you

Quote from traunlu

convert_ccc_list_to_oscam_format.sh

Code

we send this file to where again thank you

etc/tuxbox /config /oscam/

This is a script to convert the data (c: client line) listed in file called cccam.cfg to oscam readers

AJPanel have converter from CCcam to OSCam/NCame reader without any need to additional scripts

ooooo.jpg

Quote from biko

AJPanel have converter from CCcam to OSCam/NCame reader without any need to additional scripts

ooooo.jpg

Is it convert the free servers urls listed in cccam.cfg? i.e generate free account automatically

Quote from biko

AJPanel have converter from CCcam to OSCam/NCame reader without any need to additional scripts

unfortunately You are wrong.

there are 2 different files with same name. i made same misstake

AJPanel can read declared C:lines from CCcam.cfg, but my script reads C;lines from http* adresses from file with this name and then creates proper oscam.server file.

Btw i could write it in py, would b much easier, but .... ;-)

so neue version zum testen

WICHTIG erst die alte Oscam von mir Deinstallieren

also Mohamed cam ist genauso schnell beim umschalten

wenn dann liegt es an seinen confs , meine confs mit seiner Binary , ist mir nichts aufgefallen

so new version to test

IMPORTANT Uninstall my old Oscam first

So Mohamed cam is just as fast when switching

if then it is because of his confs, my confs with his binary, I didn't notice anything