Non è possibile fare un test ICAM Sky o Oscam anche per poche ore
OScamicam_117xx_Vx_Vx_kitte888_Vx_Revision_All ipk & Settings- Not for UK
- ahmed gazye
- Thread is marked as Resolved.
-
-
what is not possible?
For a test you need a test line from a provider
otherwise there is no sky -
So this seems to be a free server
098C no longer works
098D must be for Icam with the Icam settings
if it says not found the server doesn't respond
Have you ever gotten a testline so you can see that your confs work?Ok, so you need a supplier cmq that provides those specific keys of the providers interested to have a mink, right?
Unfortunately I don't know if the test lines in my place provide those data and I don't know where to find suppliers of lines that have that specific provider to test.
I try to look for some specific test line with Ident 098c and 098d to do tests. Thank you.
Greetings. -
Hi kitte888 , I found a server line that sends the Sky-DE caid in question via osc_mcs, with this server the vision is ok even if it freeze often and continuously, perhaps it depends on the server line because it is a free test, I hope with a non-free line works well without image freezes.
As far as you know, is there a possibility that we can also see Sky-IT? Do you know if they're working on it? Thank you.
Greetings.
-
Hi kitte888 , I found a server line that sends the Sky-DE caid in question via osc_mcs, with this server the vision is ok even if it freeze often and continuously, perhaps it depends on the server line because it is a free test, I hope with a non-free line works well without image freezes.
As far as you know, is there a possibility that we can also see Sky-IT? Do you know if they're working on it? Thank you.
Greetings.
and for Movistar+
thanks @kitte888
-
Movistar+
ICAM will only work for Sky DE, Italia & UK. Not any other packages.
-
Hi kitte888 perhaps it depends on the server line because it is a free test, I hope with a non-free line works well without image freezes.
is there a possibility that we can also see Sky-IT? Do you know if they're working on it?
If it freezes on the test it will definitely freeze on the non-free, its coming from the same server after all.
Sky-IT is not available on Kitte888`s version. You need to use this ~ OSCam-ICam For SKY IT, UK, DE.
Only a few channels are available on the Sky-IT package. Download the userbouquets from the first post to see what they are.
-
i installed it on opvix it work ok but It all files are installed inside config folder on the path /etc/tuxbox/
and when install any other oscam it replaced files
Kindly modify the installation to be in a separate oscamicam folder inside the path as you done for all other images
Thanks for your support
-
i installed it on opvix it work ok but It all files are installed inside config folder on the path /etc/tuxbox/
and when install any other oscam it replaced files
Kindly modify the installation to be in a separate oscamicam folder inside the path as you done for all other images
Thanks for your support
Yes I agree but it has been like that before not even on openvix but individual oscam versions from some members go to /etc/tuxbox folder rather than to config folder and individual folder,
so you know what versions you have installed, example etc/tuxbox/config/oscamicam.
but I think openvix did always add files to etc/tuxbox/
-
Yes I agree but it has been like that before not even on openvix but individual oscam versions from some members go to /etc/tuxbox folder rather than to config folder and individual folder,
so you know what versions you have installed, example etc/tuxbox/config/oscamicam.
but I think openvix did always add files to etc/tuxbox/
always kitte888 have his oscamicam in individual folder which is perfect to avoid conflict with any other oscam installed
only opvix which have that issue and egami before until kitte fix it
-
I look at it, but there are images where you don't have a start file and then it goes into general config
That's why I made the camcenter, which has its own start scripts
-
-
verstehst du es mal , M+ geht nicht
-
update fpr test openvix
install , reboot and
oscam start with Softcam Scricpt
donload V29
-
For IT and GB right ??
-
For IT and GB right ??
No only DE
-
update fpr test openvix
install , reboot and
oscam start with Softcam Scricpt
donload V29
- when uninstall old v.28 your uninstall script have issue,it remove all config files for ncam too and, it do force reboot after finsh
- v.29 installed and config files transferred to individual folder but script can't see config files
that's screen shoot from path /etc/tuxbox/config
attached log for "kitte888_oscamicam_postinst" & "kitte888_oscamicam_preinst"
-
yes, when uninstalling, unfortunately others were also deleted, it will be fixed in the next
yes it will be rebooted because there were problems in other images
But you can also install v29 directly, it should work
It may be that you don't start via softcam script
the cam manager from openvix always looks in this directory and doesn't work
Oscam Start Softcam Script not Softcam Verwaltung
-
yes, when uninstalling, unfortunately others were also deleted, it will be fixed in the next
Thanks for attention about that issue
yes it will be rebooted because there were problems in other images
i think that need to reconsidered !
But you can also install v29 directly, it should work
It may be that you don't start via softcam script
the cam manager from openvix always looks in this directory and doesn't work
i installed directly from ipk file transferred to tmp and done by image install
of course i start from image came manger panel !
opvix work great with that from v.28
only v.29 when add individual folder there is issue happened
-
With openvix use sofcam script method not sofcam manager for separate folder.
Menu, setup, sofcam script this will be similar to OpenATV/pli press right to switch cam and restart sofcam. Disable any softcams running in softcam manager first.
OSCam-EMU Support Forum
Configs, discussion, downloads and guides for OSCam-EMU Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!