Hello, who can make me a user group for deustlan. Thank you
:Translate:
OSCam-ICam For SKY IT, UK, DE
-
- Various
- ICam Support
- samur
- Closed
- Thread is marked as Resolved.
-
-
Do Sky IT and Sky UK also have to “Skip CWs checksum test only for: ,, be done like with SKY DE ???
and which entries exactly?
-
Do Sky IT and Sky UK also have to “Skip CWs checksum test only for: ,, be done like with SKY DE ???
and which entries exactly?
Sky UK is 0963, is set with the Skip CWs. 0961 has no Skip so not needed.
Sky IT should be 09cD with Skip CWs but Many can not see these channels because not many Sky IT Card holders put there card in Oscam sharing as Public Only Private & charge money for this provider sadly.
Regards Talks.
-
Beate uhse is visible and can be added to the bouquet of Sky de?
-
do i need a old $ly white uk card or not? and can it work on solo2 or vu+ ultimo
Please could someone confirm,
-
is DAZN 1 & still work on icam or something change on bouquet !!!
-
-
yes sky de, can you share your icam bouquet to re_check
-
Sorry I didn't realise which topic this is.
I use TVHeadend so no special channel list needed.
Also I use ncam.
-
Sorry I didn't realise which topic this is.
I use TVHeadend so no special channel list needed.
Also I use ncam.
ok no problem, i will try to re install icam bouquet
-
-
-
Due to several frequency changes shouldn't there be an updated "userbouquet sky icam all" in the #1 post?
-
Hi
Is there anyway to push fake cw (black screen) with lg flaged.????
Im getting found cw flaged LG but black screen (freez)..!!!!
Im using the last Ocsma ICAM V9 Build By Kitte888.
Setting are correct and working nice when i stop Cacheex..
Tnx in advance for ur feedback guys.
-
Thanks ciefp
Atached new icam bouquet for sky italy, de, uk for who want to use manually like me
☆ skyuk ☆
#SERVICE 1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "userbouquet.ciefp_28e_skyuk_icam.tv" ORDER BY bouquet
☆ skyde ☆
#SERVICE 1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "userbouquet.ciefp_19e_skyde_icam.tv" ORDER BY bouquet
☆ skyitalia ☆
#SERVICE 1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "userbouquet.ciefp_13e_skyitalia_icam.tv" ORDER BY bouquet
-
Thank you.
For some reason Dazn 2 HD De doesn't want to work, or I am doing something wrong.
What I did is to manually edit and replace only the 2 lines considering Dazn 2 HD of my previous already there userbouquet.ciefp_19e_skyde_icam.tv file with the ones inside yours last settings. Using ftp.
No luck unless I have to edit another file?
I already scanned the new freqs and Dazn 2 is found and has full signal. All the other channels of course are working fine.
Edit: I even copied the whole bouquet, something is wrong with both Dazn 1 and 2 now.
Neither are working. (The Other channels are woring)
On my previous bouquet Dazn 1 still working fine.
-
Display More
Thank you.
For some reason Dazn 2 HD De doesn't want to work, or I am doing something wrong.
What I did is to manually edit and replace only the 2 lines considering Dazn 2 HD of my previous already there userbouquet.ciefp_19e_skyde_icam.tv file with the ones inside yours last settings. Using ftp.
No luck unless I have to edit another file?
I already scanned the new freqs and Dazn 2 is found and has full signal. All the other channels of course are working fine.
Edit: I even copied the whole bouquet, something is wrong with both Dazn 1 and 2 now.
Neither are working. (The Other channels are woring)
On my previous bouquet Dazn 1 still working fine.
i have same issue which i mention on post #1,148
if any one have the solution be grateful
-
Display More
Teşekkür ederim.
Dazn 2 HD De nedense çalışmak istemiyor ya da ben bir şeyleri yanlış yapıyorum.
Yaptığım, daha önce orada bulunan userbouquet.ciefp_19e_skyde_icam.tv dosyamın Dazn 2 HD'sini göz önünde bulundurarak yalnızca 2 satırı manuel olarak düzenlemek ve sizin son ayarlarınızdakilerle değiştirmek. ftp'yi kullanma.
Başka bir dosyayı düzenlemek zorunda olmadıkça şansım yok mu?
Yeni frekansları zaten taradım ve Dazn 2 bulundu ve tam sinyale sahip. Diğer tüm kanallar elbette iyi çalışıyor.
Düzenleme: Tüm buketi bile kopyaladım, şimdi hem Dazn 1 hem de 2'de bir sorun var.
İkisi de çalışmıyor. (Diğer kanallar çalışıyor)
Önceki buketimde Dazn 1 hala iyi çalışıyor.
Codemerhaba, çalışan dazn 2 kanal kodunu ekliyorum, manuel olarak kanal listenize eklemeyi deneyin #SERVICE 1:0:19:84:8:85:21:0:0:0:http%3a//127.0 .0.1%3a17999/1%3a0%3a19%3a84%3a8%3a85%3aC00000%3a0%3a0%3a0%3a:DAZN 1 HD #TANIM DAZN 1 HD #SERVICE 1:0:19:7A:8:85:21:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a19%3a7A%3a8%3a85%3aC00000%3a0%3a0 %3a0%3a:DAZN 2 HD #TANIM DAZN 2 HDDisplay MoreTeşekkür ederim.
Dazn 2 HD De nedense çalışmak istemiyor ya da ben bir şeyleri yanlış yapıyorum.
Yaptığım, daha önce orada bulunan userbouquet.ciefp_19e_skyde_icam.tv dosyamın Dazn 2 HD'sini göz önünde bulundurarak yalnızca 2 satırı manuel olarak düzenlemek ve sizin son ayarlarınızdakilerle değiştirmek. ftp'yi kullanma.
Başka bir dosyayı düzenlemek zorunda olmadıkça şansım yok mu?
Yeni frekansları zaten taradım ve Dazn 2 bulundu ve tam sinyale sahip. Diğer tüm kanallar elbette iyi çalışıyor.
Düzenleme: Tüm buketi bile kopyaladım, şimdi hem Dazn 1 hem de 2'de bir sorun var.
İkisi de çalışmıyor. (Diğer kanallar çalışıyor)
Önceki buketimde Dazn 1 hala iyi çalışıyor.
-
-
I tried it,DAZN 1 HD =Timeout reading PAT
DAZN 2 HD=works
where is the problem (DM 920 NN2 Image)?????
-
Denedim, DAZN 1 HD = PAT okuma zaman aşımı
DAZN 2 HD=çalışıyor
sorun nerede (DM 920 NN2 Image)?????
merhaba, çalışan dazn 2 kanal kodunu ekliyorum, manuel olarak kanal listenize eklemeyi deneyin #SERVICE 1:0:19:84:8:85:21:0:0:0:http%3a//127.0 .0.1%3a17999/1%3a0%3a19%3a84%3a8%3a85%3aC00000%3a0%3a0%3a0%3a:DAZN 1 HD
#TANIM DAZN 1 HD
#SERVICE 1:0:19:7A:8:85:21:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a19%3a7A%3a8%3a85%3aC00000%3a0%3a0 %3a0%3a:DAZN 2 HD
#TANIM DAZN 2 HD
-
Your resource for OSCam-EMU softcam
