dm920 - Python 3.1x.x - openimage-develop-from Satpong

There are 556 replies in this Thread which was already clicked 106,200 times. The last Post () by hecha71.

    Quote from moreg

    piterfree thanks for this backup but it has nothing to do with the topic and is full of plugins and other unnecessary add-ons that I personally don't need. I always install the image cleanly and add plugins and settings that I need and need. So far the Open vix image is working very well and there is no problem with the C lines in Oscam

    Ok...the plugins can be uninstalled, it's not a problem, then there is the original soft without anything that is in the Dream_920 section, however I tested all the soft if you check what I like to do and all...if you keep Ci+plus and Cilinee active the soft blocks, in 2019 the only one that worked properly was OpenVision which I still have the backup...it was the best that worked.

    VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE_DR.800sim japar ed 800SEsim a8p_Mutant 51_4k_GB.UE.4k_DM.920+900
    H9combo_H9.2H-SE_H7s_H2H_H5
    clapping hands 1
    Quote from piterfree
    Quote from moreg

    piterfree thanks for this backup but it has nothing to do with the topic and is full of plugins and other unnecessary add-ons that I personally don't need. I always install the image cleanly and add plugins and settings that I need and need. So far the Open vix image is working very well and there is no problem with the C lines in Oscam

    Ok...the plugins can be uninstalled, it's not a problem, then there is the original soft without anything that is in the Dream_920 section, however I tested all the soft if you check what I like to do and all...if you keep Ci+plus and Cilinee active the soft blocks, in 2019 the only one that worked properly was OpenVision which I still have the backup...it was the best that worked.

    OpenViX works with ci+ module and oscam simultanious without issues...

    Hello, the plugins continue to give problems when I try to download the error. I will definitely change the firmware, always giving problems with the plugins and when I try to update, yes, it does but it remains the same. Thank you very much for your help, but there is a new firmware openPLi-Py3-dm920

    LG sedutor

    Quote from DimitarCC
    Quote from piterfree
    Quote from moreg

    piterfree thanks for this backup but it has nothing to do with the topic and is full of plugins and other unnecessary add-ons that I personally don't need. I always install the image cleanly and add plugins and settings that I need and need. So far the Open vix image is working very well and there is no problem with the C lines in Oscam

    Ok...the plugins can be uninstalled, it's not a problem, then there is the original soft without anything that is in the Dream_920 section, however I tested all the soft if you check what I like to do and all...if you keep Ci+plus and Cilinee active the soft blocks, in 2019 the only one that worked properly was OpenVision which I still have the backup...it was the best that worked.

    OpenViX works with ci+ module and oscam simultanious without issues...

    Ok...great, if it works I will put it here on the site...assuming it works...I am very experienced on these things if there are problems I will write it, like for ATV and other software that they write that they work without problems but then they crash.

    VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE_DR.800sim japar ed 800SEsim a8p_Mutant 51_4k_GB.UE.4k_DM.920+900
    H9combo_H9.2H-SE_H7s_H2H_H5
    thumbs up 1
    Quote from DimitarCC

    OpenViX works with ci+ module and oscam simultanious without issues...

    I wouldn't say that..my tricolor module does not work in this image from the word at all.-constant message -"that the module is not designed to work in this receiver.". although everything is fine on other images - Why is that?

    and after installing enigma2-plugin-extensions-ci-plus-helper-openbh-openbox, the module stopped being defined-it is not initialized.. The circus is all :laugh1:

    So much for the vaunted work of the team to edit in children's edits and knock on your chest with your fist that this is a great innovation, but in fact-a bug on a bug

    You need a ci+ certificates....

    That is not supplied with the image since it is illegal.

    If you have not certificates you will get a message that module is not compatible with your tv

    As for certificates... Google is your friend to find...

    (i have never tried tricolor module since i have not access to that sat. I use 2 modules - Bulsatcom 39E and Vivacom 13E. Both works fine in dreambox dm920 and oscam too. )

    Quote from piterfree
    Quote from DimitarCC
    Quote from piterfree
    Quote from moreg

    piterfree thanks for this backup but it has nothing to do with the topic and is full of plugins and other unnecessary add-ons that I personally don't need. I always install the image cleanly and add plugins and settings that I need and need. So far the Open vix image is working very well and there is no problem with the C lines in Oscam

    Ok...the plugins can be uninstalled, it's not a problem, then there is the original soft without anything that is in the Dream_920 section, however I tested all the soft if you check what I like to do and all...if you keep Ci+plus and Cilinee active the soft blocks, in 2019 the only one that worked properly was OpenVision which I still have the backup...it was the best that worked.

    OpenViX works with ci+ module and oscam simultanious without issues...

    Ok...great, if it works I will put it here on the site...assuming it works...I am very experienced on these things if there are problems I will write it, like for ATV and other software that they write that they work without problems but then they crash.

    As i wrote above i use 2 CI+ modules (Bulsatcom and Vivacom). Both works fine and works simultanious with oscam (if you make correct settings).

    Dont forget you need ci+ certificates that are not supplied with image.

    hi, that plugin you are installing is very old and no longer suitable for Py3 and beyond, you need a developpen to update it to be able to use it.

    VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE_DR.800sim japar ed 800SEsim a8p_Mutant 51_4k_GB.UE.4k_DM.920+900
    H9combo_H9.2H-SE_H7s_H2H_H5

    When you do an update, it does, but the plugins stay the same. I've already installed the web version twice, which you posted on the forum, both times, and the plugins are the same, both the IPTV plugins and the three plugins. I really think I'll go for the new Openvix version until you install a new image.

    dm920 - Python 3.12.4 - openpli-develop - homebuild or 3.12.5

    I won't give any more information here until you solve the problem because in the last few months there have been constant problems with the firmwares of the

    dm920 - Python 3.12.4 - openpli-develop - homebuild. I'm sorry, I don't want to take up your time. There are many posts for you to answer. Have a good weekend. LG sedutor

    I think that writing is useless...if you don't know how to do some research and understand what needs to be done to use an excellent decoder...I'll just post the photos...because ready-made food is useful.


    IMG_20240830_132409~2.jpg

    IMG_20240830_132334~3.jpg

    IMG_20240830_132316~4.jpg

    Ok 100x100.

    IMG_20240830_133127~2.jpg

    VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE_DR.800sim japar ed 800SEsim a8p_Mutant 51_4k_GB.UE.4k_DM.920+900
    H9combo_H9.2H-SE_H7s_H2H_H5

    since I feel like playing with the decoder I also did this to give you the opportunity to demonstrate that I have the Tvsat Card in Reader 0 and it also activates the Cam Ci+Plus Nera from Tvsat and they work in symbiosis without giving emulation problems between the 2 options, on other software that I have tested it does not work as this software is doing.

    IMG_20240830_135203.jpg

    IMG_20240830_135219.jpg

    IMG_20240830_135240.jpgIMG_20240830_135231.jpgIMG_20240830_135347~2.jpgIMG_20240830_135231.jpg

    IMG_20240830_135319~2.jpg

    I tested it with ATV Egami and if you add a Ciline the software crashes, you are forced to deactivate the Ci+Plus, on this software everything works without problems... you just need to update the plugins for Py3.

    VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE_DR.800sim japar ed 800SEsim a8p_Mutant 51_4k_GB.UE.4k_DM.920+900
    H9combo_H9.2H-SE_H7s_H2H_H5

    and while I'm playing right now I changed the players I modified Samur's Oscam and put TvSat on player 0 and Switzerland on Smargo and it works perfectly+Ci+PlusIMG_20240830_142538.jpg

    IMG_20240830_142618.jpg

    IMG_20240830_142635.jpg

    IMG_20240830_142658~2.jpg

    IMG_20240830_142715~2.jpg

    no blockage and no problem is encountered in zapping

    .

    VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE_DR.800sim japar ed 800SEsim a8p_Mutant 51_4k_GB.UE.4k_DM.920+900
    H9combo_H9.2H-SE_H7s_H2H_H5

    dm920 - Python 3.12.6 - openpli-develop - homebuild ! 20240915 from Satpong

    - Python 3.12.6, Glibc 2.40, GCC 14.2, OpenSSL 3.3.1
    - ServiceApp, FFmpeg 7.0.2, GStreamer 1.24.7
    - Ciplus, OScamstatus, OScam 11831
    - OpenWebif, EPG-Import, File Commander, YouTube 1226
    - blindscan, cablescan, fastscan, terrestrialscan
    - feed dm920/drivers/settings/picons/skins/plugins



    openPLi-Py3-homebuild-dm920-20240915.tar.gz


    P.S. -perhaps this is one of the latest image updates from the author, as the phrase in his post in small print was alerted -(I don't have time for this hobby. Maybe it's time to switch to another openimage) :pleading face:


    The author updated the image according to the complaint of one of the users, allegedly there is a problem with oscam, he did not see a crookedly working oscam that was pre-installed by the author, this version of oscam requires the installation of dependencies-installed oscam depends libdvbcsa

    Code
    - changed libdvbcsa
- oscam-emu 11833 & oscam 11833

    openPLi-Py3-homebuild-dm920-20240917.tar.gz


    How can the author see that there is a problem with oscam as the author does not use C lines and does not exchange sharing. I wrote it to him several times in the other forum but he doesn't understand me, simply because he doesn't use lines. Why are there no problems with open vix and with pli development there are...

    I haven't tried the latest builds he uploaded but it is unlikely that he fixed the problem with the C lines in oscam

    DM 920 UHD

    DM 800HDse

    DM 500HD :dish:

    Edited once, last by moreg ().

    Quote from moreg

    How can the author see that there is a problem with oscam as the author does not use C lines and does not exchange sharing. I wrote it to him several times in the other forum but he doesn't understand me, simply because he doesn't use lines. Why are there no problems with open vix and with pli development there are...

    I haven't tried the latest builds he uploaded but it is unlikely that he fixed the problem with the C lines in oscam

    libdvbcsa is needed by streamrelay (iCam),


    TS

DM920 images

Download openatv, dream-elite, satlodge, newnigma2, openpli, powersat, images | firmware for Dreambox DM920 UHD, enigma2, dreamos, satellite and cable linux hd receivers.