MultiStalker Pro - discussion & support

corpina · Jun 6th 2024

Quote from jobedir

Quote from corpina

Quote from ziko

Quote from corpina

Now I would like to clear up some doubts:
Anyone who has multiboot boxes and uses different images, for exemple (Egami, Pure, and OpenATV), if you put the same IP in all images you can use the same structure/url/mac in all images or for each image we will have to create a new structure of url/mac via OpenWebIf?

After entering all our portal (URL/MAC) via OpenWebIf, is it possible to copy the data we entered and save it in case it is needed in future?
If possible, where can we copy this data?
Thanks

Display More
copy your json file to your hard drive now the same file will be shared for all images

Display More
With DCC I went to etc/enigma2 and there is still a folder with name MultiStalkerPro.json, open this folder and saw that it has the same structura as versions 1.1.
Is this what I have to copy and save?
Will you work on the other images later?

Display More

Post

RE: MultiStalker Pro - discussion & support

(Quote from djkpap)

need to delete old jason file and start by new empty one
structure are changed

(Code, 19 lines)

biko

Jun 3rd 2024

etc/enigma2/MultiStalkerPro.json

Display More

Yes, Ive seen that.

After looking more closely I saw that there were two structures in json, one old and one new.

harkan · Jun 6th 2024

dear ziko brother very nice now obh , openvix ,pure2,openatv ok thanks

ziko · Jun 6th 2024

Quote from Luq UK

Hi,

I got problem with instaling new Multi-Stalker 1.2 (1.1 works good on my openATV 7.4)

Code

root@sf8008:~# opkg install --force-depends /tmp/*.ipk                                                                                                        Couldn't find anything to satisfy '/tmp/*.ipk'.                                                                                                               Unknown package '/tmp/*.ipk'.                                                                                                                                  * opkg_solver_install: Cannot install package /tmp/*.ipk.                                                                                                    root@sf8008:~# opkg update && opkg install --force-overwrite /tmp/*.ipk                                                                                       Downloading https://feeds2.mynonpublic.com/7.4/sf8008/3rdparty/Packages.gz.                                                                                   
Updated source 'openatv-3rdparty'.                                                                                                                            Downloading https://feeds2.mynonpublic.com/7.4/sf8008/all/Packages.gz.                                                                                        
Updated source 'openatv-all'.                                                                                                                                 Downloading https://feeds2.mynonpublic.com/7.4/sf8008/cortexa15hf-neon-vfpv4/Packages.gz.                                                                     
Updated source 'openatv-cortexa15hf-neon-vfpv4'.                                                                                                              Downloading https://raw.githubusercontent.com/oe-alliance/enigma2-settings-feed/gh-pages/Packages.gz.                                                         
Updated source 'enigma2-settings-feed'.                                                                                                                       Downloading https://raw.githubusercontent.com/oe-alliance/picons-feed/gh-pages/Packages.gz.                                                                   
Updated source 'oe-alliance-picon-feed'.                                                                                                                      Downloading https://feeds2.mynonpublic.com/7.4/sf8008/sf8008/Packages.gz.                                                                                     
Updated source 'openatv-sf8008'.                                                                                                                              Downloading https://feeds2.mynonpublic.com/7.4/sf8008/sf8008_3rdparty/Packages.gz.                                                                            
Updated source 'openatv-sf8008_3rdparty'.                                                                                                                     Downloading https://feeds2.mynonpublic.com/7.4/STATIC/static-cortexa15hf-neon-vfpv4/Packages.gz.                                                              
Updated source 'openatv-static-cortexa15hf-neon-vfpv4'.                                                                                                       Downloading https://feeds2.mynonpublic.com/7.4/STATIC/static-sf8008/Packages.gz.                                                                              
Updated source 'openatv-static-sf8008'.                                                                                                                       Couldn't find anything to satisfy '/tmp/*.ipk'.                                                                                                               Unknown package '/tmp/*.ipk'.                                                                                                                                  * opkg_solver_install: Cannot install package /tmp/*.ipk.                                                                                                    root@sf8008:~#

put the ipk in tmp

ziko · Jun 6th 2024

if you have a problem accessing the page

Code

/multi-stalkerpro/portals

via telnet type:

Code

init 4

Then:

in /etc/enigma2 a file called settings

Code

/etc/enigma2/settings

open it and delete this line

Code

config.plugins.MultiStalkerPro.portalNB=27

you will find another value it doesnt matter just delete the whole line save the file.

then again in the console

Type:

Code

init 3

the box will restart and then you can access the webinterface without a problem.

i have fixed this locally, in the next update it wont be problem with opening the webinterface.

rahimi29 · Jun 6th 2024

@ziko

hi is multistalker pro 1.2 for aarch 64 avaiable ?

thanks

@ziko

just seen new update thanks again

sarsan · Jun 6th 2024

@ziko

Thank you for last update 1.2; the plugin works perfectly

just found small typo in the: Setting/Show Backdrop/ "No/Old"

should be "No/Yes"

pasted-from-clipboard.png

its ipk for ATV 7.4

saalty · Jun 6th 2024

Hello all!

Installed the 1.2 version on VU+ Zero 4K (latest OpenATV 7.4) and seems the installatios was successfull but not found in plugins. Also if I go to remove plugins I find it there. Any suggestions?

sarsan · Jun 6th 2024

Quote from saalty

Hello all!

Installed the 1.2 version on VU+ Zero 4K (latest OpenATV 7.4) and seems the installatios was successfull but not found in plugins. Also if I go to remove plugins I find it there. Any suggestions?

restart your box

saalty · Jun 6th 2024

Already did it

saalty · Jun 6th 2024

Reinstalled and it is wrking fine. Maybe installed the other version than ARM previously

Saraceno84 · Jun 6th 2024

Perfect and Nonsolosat -33-py3 =3.9.9

3.jpg 4.jpg

5.jpg

Bella Italia · Jun 6th 2024

Quote from Saraceno84

Perfect and Nonsolosat -33-py3 =3.9.9

Do you mean that the version for py 3.12.x is installable on py 3.9 or which version did you use?

I ask because I soon have to update my Nonsolosat to 33 and I want to install MSP.

Saraceno84 · Jun 6th 2024

Quote from Bella Italia

Quote from Saraceno84

Perfect and Nonsolosat -33-py3 =3.9.9

Do you mean that the version for py 3.12.x is installable on py 3.9 or which version did you use?
I ask because I soon have to update my Nonsolosat to 33 and I want to install MSP.

No version for OpenPli ..... Post for Py3 - 3.9.9

asavmpek · Jun 6th 2024

I installed version 1.2 on Open ATV 7.4 and it works great, but MultiStalkerPro.json Not Found

2024-06-06_163950.png

**Warder** · Jun 6th 2024

Look for in /etc/enigma2/ .

asavmpek · Jun 6th 2024

Quote from Warder

Look for in /etc/enigma2/ .

I know that, but with this new version it is not there

**Warder** · Jun 6th 2024

It's still there, the change compared to version 1.1 is a different recording format. But I don't mean to argue with you about it, believe what you want.

cookysnack · Jun 6th 2024

It would be nice to be able to upload the lists by connecting with the Mac address

ahmedgalal · Jun 6th 2024

Crash with open vix when marking plugin cache

cup74 · Jun 6th 2024

Box Octagon SF8008

Imagem OpenAtv 7.4 OK

Imagem Egami 10.5 R6 OK

Thanks Zico

MultiStalker Pro - discussion & support

master G Jun 6th 2024

Your resource for Enigma2 IPTV plugins

Participate now!

Share

Tags