MultiStalker Pro - discussion & support

Quote from pascal46

I have the mu3 link, mutistalker pro is better, so I wanted to use it.

ok, you can add on json file as explain before !

Quote from @dragon@

if you have the latest version then access the portal by entering the IP of your decoder like this http://192.168.x.xxx/multi-stalkerpro/portals insert both your m3u and mac you will find it directly in the multistalkerpro.json files

I tried here, it doesn't seem to be working

Quote from biko

Quote from pascal46

I have the mu3 link, mutistalker pro is better, so I wanted to use it.

ok, you can add on json file as explain before !

Is there an example? I don't know how it's done.

Quote from pascal46

Is there an example? I don't know how it's done.

see that post

Post

RE: MultiStalker Pro - discussion & support

(Quote from gigafox72)

you need to reconfigured json file
as that sample
portal = type: 1
iptv = type: 2
(Code, 19 lines)

biko

Oct 30th 2024

{
"host": "http://xxxxxx",
"username": "xxxx",
"password": "xxx",
"type": 2
}
]

Isn't it just here?

In the "Add portal" page click on "MAG" and from there you can choose to insert an m3u.

biko unfortunately it didn't happen :(

Ok, thank you.

Hello!

I have Ab PULSe 4k with OpenATV 7.5. My Menu button on the RC doesn't work. The situation is same with OpenATV 7.4. With my Vu+ Zero 4k OpenATV 7.4 (devel) it worked. But in the past I had this issue with Vu+ too, can't remember with which image, or how I solved it. Is there any solution for this issue? Sometimes I need the menu during when I'm watching iptv.

Quote from saalty

Hello!

I have Ab PULSe 4k with OpenATV 7.5. My Menu button on the RC doesn't work. The situation is same with OpenATV 7.4. With my Vu+ Zero 4k OpenATV 7.4 (devel) it worked. But in the past I had this issue with Vu+ too, can't remember with which image, or how I solved it. Is there any solution for this issue? Sometimes I need the menu during when I'm watching iptv.

It's OT but your remote just need to be cleaned inside.
To fix it gently open it with the use of plastic levers if you have any, there are clips all around the perimeter so be carefull, clean the remote's board with some alcohol, better if isopropyl alcohol but also normal denatured alcohol is fine, let it dry and close it again, the buttons should all be functional again as new.
/OT

Quote from pascal46

biko unfortunately it didn't happen :(

are you try via web as v1.2

support for Xtream subscriptions.

Added a web interface to add/remove or modify Portals, and you can also add your own API keys from the web interface.

The structure of the MultistalkerPro.json file has changed, so you need to add your Portals again through the web interface, and it is best to empty the MultistalkerPro.json file. You can access the web interface using the same IP address for the web interface followed by /multi-stalkerpro/portals. For example, if your device's IP address is: 192.168.1.88, the link to the web interface will be

http://192.168.1.88/multi-stalkerpro/portals

Quote from Bella Italia

Quote from saalty

Hello!

I have Ab PULSe 4k with OpenATV 7.5. My Menu button on the RC doesn't work. The situation is same with OpenATV 7.4. With my Vu+ Zero 4k OpenATV 7.4 (devel) it worked. But in the past I had this issue with Vu+ too, can't remember with which image, or how I solved it. Is there any solution for this issue? Sometimes I need the menu during when I'm watching iptv.

It's OT but your remote just need to be cleaned inside.
To fix it gently open it with the use of plastic levers if you have any, there are clips all around the perimeter so be carefull, clean the remote's board with some alcohol, better if isopropyl alcohol but also normal denatured alcohol is fine, let it dry and close it again, the buttons should all be functional again as new.
/OT

No! My remote work perfectly. Only if I use Multistalker-Pro then Menu button has no effect (also other buttons). If I use cable or sat tuner there is no problem.

Hi guys,

Dreambox 7080 HD + OpenTs 10, give Error Refreshing after the first change of channel.

The box is locked.

Is there a solution?

Thanks

Dany

Hello Guy`s,

I need some advice on this plugin please.

I am really unsure if I have the latest version.? I have installed the version from the the ATV Open 7.4 online streams for my box.

Box is a VU+Ultimo and image installed is the stable ATV Open 7.4 and installed the stalker plugin via the online package plugins.

Please can you tell me if this is the latest version? or is there a newer release? if so? Please can some kind soul link me to the correct newer revision and all the correct packages or extra moduels needed ? to make it work on my system.

Thank you guy`s for any help or feedback to the correct files I need to install.

Best Regards,

Thread

[Plugin] MultiStalker Pro 1.2

New release same version 1.1.

- Improve login to portal and fixing some portals failed to load.
- fix loading embedded subtitles sometimes it was causing the player to hang.
- fix picons, it was downloading with wrong extension for some cases.
- add converter to convert subtitles from ass format to srt as the subtitles parser does not support ass extension.
- Add two levels of sorting to sort movies/series based on name, rating, year and addtime.
- skinning some screens.
- and some new colors are…

ziko

Apr 9th 2024

Thread

[Plugin] MultiStalker Pro 1.2

New release same version 1.1.

- Improve login to portal and fixing some portals failed to load.
- fix loading embedded subtitles sometimes it was causing the player to hang.
- fix picons, it was downloading with wrong extension for some cases.
- add converter to convert subtitles from ass format to srt as the subtitles parser does not support ass extension.
- Add two levels of sorting to sort movies/series based on name, rating, year and addtime.
- skinning some screens.
- and some new colors are…

ziko

Apr 9th 2024

you go to page 2 and below you have

Quote from Lululla

hello friends

why this line don't install Multistalker pro?

uclan 4k and pli image

wget -q --no-check-certificate "https://raw.githubusercontent.com/Belfagor2005/LinuxsatPanel/refs/heads/main/usr/lib/enigma2/python/Plugins/Extensions/LinuxsatPanel/sh/Multistalker_pro.sh?inline=false" -O - | /bin/sh;wget -q --no-check-certificate "https://gitlab.com/hmeng80/extensions/-/raw/main/multistalker/portal/Portal_multistalker.sh?inline=false" -O - | /bin/sh

HI Dear Lululla

Multi stalker support only openpli develop version, (ARM-MIPSEL) processor

There are some dependences as

python3-fuzzywuzzy
python3-levenshtein
python3-rarfile

You can try for that images ----> (VIX/OBH - ATV/PURE/EGAMI - Openpli Develop)

wget https://raw.githubusercontent.com/biko-73/Multi-Stalker/main/pro/installer.sh -O - | /bin/sh

Hi Biko.
Is this wget just valid for the develop version of openPLI 9.0? I have the release version but it doesn't seam to find something.

root@sf8008:~# Installing python3-rarfile (4.0) on root
-sh: syntax error near unexpected token `('
root@sf8008:~# Downloading http://downloads.openpli.org/feeds/openpli-9-release/cortexa15hf-neo               n-vfpv4/python3-rarfile_4.0-r0.0_cortexa15hf-neon-vfpv4.ipk.
Retrieve files via HTTP or FTP


--spider        Only check URL existence: $? is 0 if exists
--no-check-certificate  Don't validate the server's certificate
-c              Continue retrieval of aborted transfer
-q              Quiet
-P DIR          Save to DIR (default .)
-S              Show server response
-T SEC          Network read timeout is SEC seconds
-O FILE         Save to FILE ('-' for stdout)
-o LOGFILE      Log messages to FILE
-U STR          Use STR for User-Agent header
-Y on/off       Use proxy
tar: can't open '/tmp/MS-1.2.tar.gz': No such file or directory
-sh: Downloading: command not found
root@sf8008:~# Configuring python3-rarfile.
-sh: Configuring: command not found
root@sf8008:~# > Need to install >>>> python3-zoneinfo <<<< please wait...
-sh: syntax error near unexpected token `>>'
root@sf8008:~# --------------------------------------------------------------------------------               -----
-sh: --------------------------------------------------------------------------------: command not found
root@sf8008:~#
root@sf8008:~#  * opkg_prepare_url_for_install: Couldn't find anything to satisfy 'python3-zone               info'.
> > Downloading MS-1.2 package  please wait ...
> wget: unrecognized option '--show-progress'
> BusyBox v1.33.2 (2024-01-21 02:53:50 UTC) multi-call binary.
>
> Usage: wget [-cqS] [--spider] [-O FILE] [-o LOGFILE] [--header 'HEADER: VALUE']                [-Y on/off]
>         [--no-check-certificate] [-P DIR] [-U AGENT] [-T SEC] URL...
>
> Retrieve files via HTTP or FTP
>
>         --spider        Only check URL existence: $? is 0 if exists
>         --no-check-certificate  Don't validate the server's certificate
>         -c              Continue retrieval of aborted transfer
>         -q              Quiet
>         -P DIR          Save to DIR (default .)
>         -S              Show server response
>         -T SEC          Network read timeout is SEC seconds
>         -O FILE         Save to FILE ('-' for stdout)
>         -o LOGFILE      Log messages to FILE
>         -U STR          Use STR for User-Agent header
>         -Y on/off       Use proxy
> tar: can't open '/tmp/MS-1.2.tar.gz': No such file or directory
-sh: autoinstall.log: command not found

Thanks

Thanks Lull it also works on develop but by installing the 3 dependencies

screenshot_20241117180333.jpgscreenshot_20241117180356.jpgscreenshot_20241117181042.jpg