URGENT - Image open-atv 7.3/7.4 DM920UHD

There are 21 replies in this Thread which was already clicked 4,665 times. The last Post () by Captain.

  • Um in den Rescue Mode der 920UHD zu gelangen muss man wie folgt vorgehen:


    1. Box am Netzschalter auf der Rückseite einschalten


    2. Sobald die LED rot leuchtet den Finger vorne auf die Powertaste legen und gedrückt halten. Die LED pulsiert kurz in verschiedenen Farben. Wenn sie durchgehend rot leuchtet ist man im Rescue Modus.


    3. Im Browser die IP Adresse eingeben und schon ist man im Rescue Modus und kann die Box wie gewohnt flashen

    4. Auf dem TV/Bildschirm wird angezeigt das man sich im Rescue Modus befindet

  • dear Melgas , the log you have entered as an attachment and as an image , refers to the EGAMI image and NOT Open ATV..

    and what I always notice is that people reply without having read or seen the posts !!!

    how sad

    VU+Solo4K- VU+Solo2 -Octagon 8008- Dream 800-Sunray800SE SIM A8P



  • Hi pippomus.

    Thanks for the message.

    My real problem is no longer switching online from OpenATV 7.3 to 7.4.

    The serious problem is in Post-7.

    I tried to install the openATV 7.4 Image through the browser, without success.

    See the errors.

    But I also tried Egami 10.3/10.4, it gave precisely the same error. Unable to install.

    Now I have successfully installed SatLodge OE2.0. But...

    Python Plugins do not install.

    I've tried via Telnet: opkg install python3-imaging and opkg install python3-six, without success.

    I have no solution.

    I do not have IPTV/Streamlink (opkg install streamlinksrv, no success).

    Hugs.

    DM920-UHD4K + SF8008-UHD4K

  • dear Melgas, maybe I'm wrong, if you have crashing problems with any image, I think it's some software that conflicts or does NOT find the drivers.

    try disconnecting all the extras

    (HDD, USB and others)

    and try again...

    I know it's not easy to find the fault, but any solution should be tried.

    VU+Solo4K- VU+Solo2 -Octagon 8008- Dream 800-Sunray800SE SIM A8P



  • Upload any image on any enigma2 device, it is no different from any other image or from any other device, just follow the traditional method, which is to format the usb key to default 32 bits, put the image without winrar inside the device, ignite the device from the back and leave the device to load Image to the end, then turn off the device from behind, remove the USB key from inside the device, ignite the device from the back again and continue building the image in your own way

  • You have to remove the pressure on the image from within the winrar, first right with the mouse click on the winrar, then click on extract here, there the file or folder will be copied from the winrar, then put the file on the usb key, and flash the process



  • Hello fellows.

    Many, many thanks for your help.

    With your tips and my constant search for a solution, behold, I was able to install the OpenTSimage.

    Installed the python3 plugins.

    It's working at 100%.

    Sorry for all the inconvenience.

    Hugs for everyone.

    DM920-UHD4K + SF8008-UHD4K

  • wrong information from the beginning to the end of the whole article

    dvb got api5 error

    you got the plugin installation error

    you are stuck at boot in dreambox

    and you do not come here and write that the plugin you installed is a previous multistalker.

    but

    it works including old multistalker

    openatv 7.3 python3 3.11.2 in image

    Also let me tell you it works in rakuten tv addon

    I will complete it when I am available

    Turks should read this article

    multistalker many of you

    You got dvbapi 5 error with old multistalker in openatv 7.3

    running old multistalker 1.5 with manual one-by-one install

    but you guys are stuck at boot

    this is the blue screen error you are getting

    you are giving wrong information including the developer of the image

    best regards to you all



    bütün yazın başından sonuna kadar yanlış bilgi

    dvb api5 hatasını var

    eklenti yükleme hatasını aldın

    dreambox ta boot ta kaldın

    ve buraya gelip yüklediğin eklentinin daha önceki multistalker olduğunu dahil yazmıyorsun

    fakat

    eski multistalker dahil calışıyor

    openatv 7.3 python3 3.11.2 imajda

    ayrıca rakuten tv eklentisininde çalıştığını söyleyim

    musayit olduğumda komple yapacam

    bu yazımı türkler okusun

    multistalker çoğunuz

    openatv 7.3 te eski multistalker ile dvbapi 5 hatasını aldınız

    manuel tek tek yükleme ile eski multistalker 1.5 çalışıyor

    fakat sizler boot ta kaldınız

    aldığınız mavi ekran hatası bu

    imajın yazılımcısına dahil yanlış bilgiyi veriyorsunuz

    hepinize saygılarımla

  • Hello nexx45

    I read your message carefully.

    For my part, I only exposed the problem I had when trying to install.

    Didn't make it past startup, blue screen running.

    Understand I'm a newbie.


    As Archimede® suggested that I take out the hard drive, I went further and formatted it.

    In this sequence, last night I tried to install the OpenTSImage image. Installed successfully. But I did not rest here.


    Today, I tried installing OpenATV again.

    Successfully. I already have OpenATV 7.3 installed 100% again.


    Once again, many thanks to you all.

    Hugs.

    DM920-UHD4K + SF8008-UHD4K

OpenATV Team Images Support Forum ~ based on OE-Alliance

OpenATV Supported Models ~ Airdigital, Amiko, Anadol, Atemio, Atto, AX Technology, Axas, Beyonwiz, Dinobot, Dreambox, Edision, EVO, Ferguson, Formuler, Galaxy Innovations, Gigablue, Golden Interstar, HDBox, Hitube, James Donkey, IQON, Izibox, Jepssen, Maxdigital, Medialink, MaXytec, MediaArt, Megaset, Miraclebox, MK-Digital, Mut@nt, Novaler, Octagon, Odin, Optibox, Protek, PULSe, Qviart, Red-Eagle, Relook, Roxxs, SAB, Sezam, Sogno, Space, Spycat, Technomate, Telestar, Tiviar, T-Rex, Uclan, Venton Unibox, Vimastec, VisionNet, VU+, VUplus, World Vision, Vizyon, WWio, Xsarius, and Xtrend.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!