Hi folks. I have Evo enfinity box with Openatv 6.4 on it. It worked fine for about 2 years fine, but suddenly, few days ago, after i turned on the box, nothing happend, it was just the green light on on the front of the box, nothin more on display, no starting, no booting, nothing. On the tv screen it shows no signal. I allready tried to connect via putty, but the box doesnt show ip adress, it behaves like he is of, but it is not, like i said the green light on the front is on and thats all. I also tried to flash again with my backup on the usb stick, but there is also nothing going on, the usb is just slow blinking and nothing happens. I also tried to flash the new image, nothing. Pls help, i am desperate, every advice will be welcomed, thanks in advance
My Evo enfinity box wont start
-
- General Support
- Ado Alisic
- Thread is marked as Resolved.
-
-
master G
Approved the thread. -
did you checked another hdmi (or scart/rca cable) ?
it has an internal, or external power suppluy? (if it has an external, you can try another one)
-
did you checked another hdmi (or scart/rca cable) ?
it has an internal, or external power suppluy? (if it has an external, you can try another one)
It has external power supply, i tried another one and its still the same. So far i know, hdmi cable works fine, is it possible that the box wont boot because of the hdmi cable?
-
Quote
is it possible that the box wont boot because of the hdmi cable?
no...
but it may shows something in the tv screen, and you can't see it because of the hdmi cable. (because you refer a green light).
do you have ftp connection?
tried to reflash?
-
Quote
is it possible that the box wont boot because of the hdmi cable?
no...
but it may shows something in the tv screen, and you can't see it because of the hdmi cable. (because you refer a green light).
do you have ftp connection?
tried to reflash?
Hdmi is fine, there is nothing on the screen, i also tried with the ftp connection, but my box doesn't show any ip adress. I also tried to reflash it with usb stick, also nothing hapoens, nothing on the display. It behaves actually like the box is off, but like i said, there is power in there and the green light shows that.
-
I would check all the cables first
power supply
f-connectors (re-end them)
HDMI cables
USB flash drives
Process of elimination if its coming on but not functioning correctly.
And maybe turn the power off for an hour or so and try again. -
I would check all the cables first
power supply
f-connectors (re-end them)
HDMI cables
USB flash drives
Process of elimination if its coming on but not functioning correctly.
And maybe turn the power off for an hour or so and try again.Tnx for your reply, hdmi cable checked, power supply checked, power turned off checked, usb flash drives checked. But, what are f-connectors?
-
-
I mention f-connectors (coaxial cable connector), because one of my old boxes was having issues with the the cable. I re-ended it and my problems went away.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!