183D/183E EMM Activation via the http/https server with OSCam

-

If your gold card is active on the site, the written emm should be the right one.

--

and try this is work: no edit item in script

this used on:

-tvmanager softcam

-levis manger

-nssmanager

etc etc

If it works, you'll find the EMM in /tmp

but already sent to the card of course

Quote from blu8

the card is active, as previously announced, I wrote a dated emm on the card. The card doesn't update, something I had already tried.
-- now I try with the script, a script I already had, to change the update URL

edit/update

This is the situation, and the certain facts are not comforting.

a) oscam-samur DOES NOT update

b) plugin s4 updater does not write the emm on the card

c) script, with cronmanager, but also activated from the console, does not write the EMM on the card, same as which url

d)

if the emm were written correctly, this situation would occur in the log-oscam, which does NOT happen

(reader) Tivusat_183E [nagra] root emmtype=global, len=142 (hex: 0x8E), cnt=1: written (545 ms)

Display More

You haven't adapted the gobi2000 script to your reader either

z.B.

[reader]

label = Tivusat_183E

[webif]

httpport = 17001

httpuser =

httppwd =

#!/bin/bash

wait=3600

#oscam_user="" # Replace with the actual oscam web user

#oscam_passwd="" # Replace with the actual oscam web passwd

#oscam_port="" # Replace with the actual oscam web port

#label="tivusat"

oscam_user=

oscam_passwd=

oscam_port=17001

label=Tivusat_183E

-

Hallo gobi2000

After launching tivisat.sh with the remote control of the image receiver freezes and no longer comes out of the konsole. Vuduo2 Immage VTI Grazie

Screenshots.jpg

It's normal if you stop the cam, when you say you have a remote control what do you mean?

PS:

If you follow the step by step guide you don't have these problems, you work from the terminal.

Hallo gobi2000

If I throw tivisat.sh with the receiver's remote control Emm is written correctly, but the image stops. If I stop the Oscam It gives me error of lack of "Curl not installed". I didn't use telnet

Can you do something that you can do the update just from the receiver remote control?

Grazie

I use EGAMi and for me the script is different for start cam, post your start oscam script here, so I can add the script emm.

Hi gobi2000

My start oscam script

Oscam_11748_cam.sh

Ok please put the script tivusat.sh on /usr/bin/ chmod 0755

PS: please cech the script work, have put sleep 3s wait to start oscam. (not hawe time from momet test the script)

Oscam_11748_cam.sh

-

Testing an emm if it is correct, follow correct steps: send emm deactivation manually written from oscam web, then restart this script, if you do not have vision in a few minutes (maximum 5min) please leave a message here.

Quote from Lululla

and try this is work: no edit item in script

this used on:

-tvmanager softcam

-levis manger

-nssmanager

etc etc

If it works, you'll find the EMM in /tmp

but already sent to the card of course

Display More

Hi, I tried your script, and I wanted to know if the emm file on temp (script) is generated with the key present in the config /oscam/oscam.serveremm_url = http

I hope there is no confusion, the script I use is tivusat.sh, not emmsend which does something else (for this script you need a tv-sat cam, logger and sniffi for your cpu model of the receiver).

Quote from blu8

Quote from pinky40

Hallo gobi2000

If I throw tivisat.sh with the receiver's remote control Emm is written correctly, but the image stops. If I stop the Oscam It gives me error of lack of "Curl not installed". I didn't use telnet

Can you do something that you can do the update just from the receiver remote control?

Grazie

just because it's spelled emm spelled correctly doesn't mean it matches the facts

My 183E was dimmed and with tivisat.sh after a few seconds the programs were visible again

-

Hallo

root@gbx34k:/usr/script# sh tivusat.sh

tivusat.sh: line 24: syntax error: unexpected end of file

You hawe edit files ? Cech saved format linux format,