Hello everyone, for information, on my Octagonsf 8008, I tried the last 2 python 3 images from Openvix and Blackhole, they were not even installed, they both remained stuck at 49%....great and good luck to the team ....
Openvix and Blackhole....
- kashmir
- Thread is marked as Resolved.
-
-
Hello everyone, for information, on my Octagonsf 8008, I tried the last 2 python 3 images from Openvix and Blackhole, they were not even installed, they both remained stuck at 49%....great and good luck to the team ....
Ttry putting it in flash
-
Hello everyone, for information, on my Octagonsf 8008, I tried the last 2 python 3 images from Openvix and Blackhole, they were not even installed, they both remained stuck at 49%....great and good luck to the team ....
I did try to install both of them without any problem. Maybe check your multiboot. it's unnatural that it works for most people and it doesn't work for you.
-
I just installed opendroid no problem, I'm doing without it and that's it, just to warn other users, be careful with these images, problem....
-
master G
Moved the thread from forum OCTAGON - All Models to forum OCTAGON SF8008 4K UHD. -
On my Octagon SF8008 I have the following images installed: OpenATV 7.3, OpenHDF 7.3, OpenBH 5.3, OpenVix 6.4, Pure2 7.3, Hyperion 9.3, OpenDroid 7.3 and OpenSPA 8.3.
All these images are Py3 and they work impeccably with me.
-
OpenVIX, OpenBH and OpenVision images have a problem and do not boot when installed on some SD-cards or USB-drives.
If you change the model of the SD-card, there is a chance that they will work.
The solution is to install them in the flash slots of your box. And here, too, they may not boot.
If this is the case, disconnect the card and/or USB, boot the image and then reconnect them.
I have them all installed on the SD-card and they work great.
-
OpenVIX, OpenBH and OpenVision images have a problem and do not boot when installed on some SD-cards or USB-drives.
If you change the model of the SD-card, there is a chance that they will work.
The solution is to install them in the flash slots of your box. And here, too, they may not boot.
If this is the case, disconnect the card and/or USB, boot the image and then reconnect them.
I have them all installed on the SD-card and they work great.
These are my settings/images and everything works fine.
OCTAGON SF8008 4K UHD Linux Enigma 2 2160p H.265 HEVC Dual Wifi Multi-Stream DVB-S2X & DVB-C/T2 Combo Receiver
Download OCTAGON SF8008 4K UHD (DUAL OS) Images and Enigma2 Team Support from OpenATV - OpenB - OpenPLi - Open Vision - PurE2
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!