Hi guys,
I am having problems wit my decoder Vu+ zero.
It does not accept any image. It tries to start but, it it turns off saying : Your STB encountered a software problem...
Can anyone help me. Thank you in advance!
Hi guys,
I am having problems wit my decoder Vu+ zero.
It does not accept any image. It tries to start but, it it turns off saying : Your STB encountered a software problem...
Can anyone help me. Thank you in advance!
The old VU+ models are well known to have issues with certain USB sticks. Its recommended you try with a different USB stick or use a formatting tool.
Article
How To Flash A VU+ ZERO Linux Enigma2 Satellite Receiver
Flashing the Receiver
1) Power off the receiver
2) Ensure no other USB devices are plugged into the receiver while flashing.
3) Insert the USB stick containing the image files into one of the usb ports on the receiver, rear usb port is advised if possible.
4) Power the receiver on.
5) The WHITE L.E.D will quickly flash two or three times then start to fade in and out slowly.
6) Once completed the WHITE L.E.D will flash rapidly.
7) If in doubt leave the receiver for a full 10 minutes…
Don’t have an account yet? Register yourself now and be a part of our community!