no it doesn't work
OSCam For M7...!!!
-
- Various
- Upgrade Support
- samur
- Thread is marked as Resolved.
-
-
Still blank
-
0624 mips dark non-functional needsemmfirs-0
-
it's still dark for me even with this setting
-
needsemmfirst = 0 ... not func, I have =1 ... CAID:0624 functionaly. OSCam 11733-r799 L2b, both version (MIPS - Formuler F4T, ARMve - Octagon SF8008).
And right type of RSAkey.
-
Samur, I will ask for a new version of oscam m7 irdeto on mips caid 0624 Thank you.
-
hello samus I would ask for the latest version of m7 on the RPi4. well thank you. It can also be done without EMU
-
I would ask for the latest version of m7 on the RPi4.
with 11748 needsemmfirst = 1 is mondatory .
;
-
Hi. I'm testing the latest version on RPi4, so far it's working fine. Thank you very much
-
Hi. I have a problem with the fact that my home server has restarted and the image is not working. I have ultimo 4k - active. I wait 10 minutes and it's still dark, all emm - zero. Yesterday, the picture also came on after about 10 minutes.
-
the picture also came on after about 10 minutes.
do you have needsemmfirst = 1 in oscam.server ?
-
yes, according to the instructions
-
yes, according to the instructions
with this:
[reader]
label = M7
protocol = mouse
device = /dev/ttyUSB0
caid = 0624
rsakey = 1B4368AD00D5AE23977576FCB202D84897994B358F006B42CB4BCC2301D1FAE2BCF4C397ED4DC7DE6DCE4A1A3D88682DB672827831FA8E6B6E29E7AD37D0A21F
force_irdeto = 1 // for the ice cards and i don't know if it's needed for a pure irdeto cards
needsemmfirst = 1
detect = cd
ident = 0624:000000
group = 1
emmcache = 1,3,15,0
blockemm-unknown = 1
?
-
--> I wait 10 minutes and it's still dark, all emm - zero
Aftrer restart the card needs emm-g's to start - so it does not answer to ecm request, therefore you need "P: 0624 1" in your receiver's oscam.dvbapi to force "send emm" even if there is "no" answer from the card
-
--> I wait 10 minutes and it's still dark, all emm - zero
Aftrer restart the card needs emm-g's to start - so it does not answer to ecm request, therefore you need "P: 0624 1" in your receiver's oscam.dvbapi to force "send emm" even if there is "no" answer from the card
i don't understand you
you say with the parameter: needsemmfirst = 1
it's not working or you need to wait a lot of time ...?
-
EMM-G in 11748-800 is ignored or wrong write (see log) for card start-up, card starts up only after EMM-U arrives (which is sometimes 10-15 minutes, sometimes 30 minutes), 11734-799 no problem with start-up card
-
Cannot clear 0653. Where can I find the "extra layer" .....
-
Cannot clear 0653. Where can I find the "extra layer" .....
Use OSCam from: here
[reader]
label = M7
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 0653
rsakey = 1B4368AD00D5AE23977576FCB202D84897994B358F006B42CB4BCC2301D1FAE2BCF4C397ED4DC7DE6DCE4A1A3D88682DB672827831FA8E6B6E29E7AD37D0A21F
force_irdeto = 1
needsemmfirst = 1
detect = cd
ident = 0653:000000
group = 1
emmcache = 1,3,15,0
blockemm-unknown = 1
;
-
Thanks!
Oscam reads the card & update but no picture... is there problem with Dvbapi ( May be because I also have 0624 - now bothe dark....)
-
Why don't you put in the work (effort) and save the log output in a neat file that can be read easily and a person doesn't have to decode it like a detective ?
OSCam-EMU Support Forum
Configs, discussion, downloads and guides for OSCam-EMU Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!