Hi everyone!
I can really use some help here. I have a Tivusat Gold card (183E). The card has been confirmed active on the tivusat website.
My OSCAM (1.20_svn Build: r11732 Compiler: arm-oe-linux-gnueabi) , running on PurE2 7.3, is no longer able to decrypt Tivusat encrypted channels, despite the fact that the EMM are kept up to date at all times from the usual sources. I have been able to see them without any issue until mid-February.
This is what I see in the Web Interface:
pasted-from-clipboard.png
These are my config files:
oscam.conf:
Code
[global]
disablelog = 1
disableuserfile = 1
usrfileflag = 0
maxlogsize = 10
preferlocalcards = 1
saveinithistory = 1
lb_mode = 0
unlock_parental = 1
[cs378x]
port = 12005
[webif]
### SET PASSWORD!
httpport = 16001
#httpuser = oscam
#httppwd = oscam
httprefresh = 20
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
#httphideidleclients = 1
#httpreadonly = 0
#httpsavefullcfg = 0
#[newcamd]
#port = 35000@0100:000068;35001@0B01:000000
#allowed = 0.0.0.0-255.255.255.255
#key = 0102030405060708091011121314
#keepalive = 1
#mgclient = 1
[dvbapi]
enabled = 1
user = dvbapi
### Please experiment with different pmt=mode values (0-6)
pmt_mode = 4
extended_cw_api = 2
au = 1
### Please experiment with different delayer values (slower boxes may need a bigger value than 60 or 70 milli seconds)
delayer = 70
[streamrelay]
### enable for STBs that need stream relay!
stream_relay_enabled = 0
Display More
oscam.server:
Code
# oscam.server generated automatically by Streamboard OSCAM 1.20_svn SVN r11731
# Read more: https://svn.streamboard.tv/oscam/trunk/Distribution/doc/txt/oscam.server.txt
[reader]
label = Tivusat
protocol = internal
device = /dev/sci0
rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5
detect = cd
mhz = 500
cardmhz = 800
group = 1
emmcache = 1,1,2,0
auprovid = 005411
Display More
oscam.user
Code
# oscam.user generated automatically by Streamboard OSCAM 1.20_svn SVN r11732
# Read more: https://svn.streamboard.tv/oscam/trunk/Distribution/doc/txt/oscam.user.txt
[account]
user = dvbapi
caid = 183E
group = 1
I have no oscam.dvbapi file (do I need one?)
And this is what I keep getting in the log:
Code
2024/03/23 10:33:19 6EE3F0F3 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 2 enabled and 0 disabled ecmpids!
2024/03/23 10:33:19 6EE3F0F3 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 183E PROVID 000000 ECMPID 1137 ANY CHID PMTPID 0453 VPID 01FB
2024/03/23 10:33:19 6EE3F0F3 c (ecm) dvbapi (183E@000000/0000/0D4F/91:D1F568B3F2A04D8CE1DAA8301070630B): not found (1 ms) by Tivusat
2024/03/23 10:33:20 6EE3F0F3 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1856 PROVID 000000 ECMPID 0FA7 ANY CHID PMTPID 0453 VPID 01FB
2024/03/23 10:33:20 6EE3F0F3 c (ecm) dvbapi (1856@000000/0000/0D4F/AF:00000000000000000000000000000000): rejected caid (1 ms) (invalid caid 0x1856)
So, I have 2 questions:
- How do I disable the 1856 CAID, given that I don't have that card type?
- What do I need to change in the config files in order to see the encrypted channels again?
Any help would be appreciated. Thank you! very much :-)