Good morning everyone and sorry for my basic English. I have a dreambox 900 uhd with a LAN problem. There is no way that the IP address appears on the display when I set it to rescue mode. The dm 900 was blocked with the red light on. I was able to unlock it with the service cable on the service port with the "recovery" command. Now the firmware 4.3.2r12-2020-05-12 is installed. Let me start by saying that I have access to the dm 900 with wifi correctly installed in ftp and telnet. Is it possible to install other images such as openatv or PLI or more powerful images without having to use the rescue interface for my LAN problem? Can the web interface (in rescue mode) be activated using wifi?
DM900 UHD with a Lan Problem
- pappagone2000
- Thread is marked as Resolved.
There are 8 replies in this Thread which was already clicked 354 times. The last Post () by pappagone2000.
-
-
You can install images via the USB Stick, I would do that way... an image that has support of Wifi (most of them), using a good Wifi Dongle (Ralink/Mediatek or Realtek chipsets are the most supported).
Code
Display MoreFlash any image on Dreambox (DM900), 1- Format USB with Fat-32 2- Label usb "DREAMFLASH" 3- Copy image to USB Drive 4- Rename image "dreambox-image-dm900.tar.xz" 5- Insert USB to receiver 6- Now from standby menu select Recovery Mode or Shut Down your receiver and then press and hold touch button of receiver or from telnet give any one of below commands to-the-rescue or echo "rescue" >> /proc/stb/fp/boot_mode reboot
The OpenPLi below has a last variety of USB Wifis compatible,
TS
DM900UHD : OpenPLi 8.xStar 20240319 GSt 1.20.5 (Original)
openpli-enigma2-8xstar-dm900.root.tar.bz2
OpenPLi Release by OpenPLi Team, March 19th, 2024
- Python 3.9.9
- GStreamer 1.20.5
- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (Dash Support)
- EPGImport Built-in
- AC3+/DDP/EAC3 support
- Feeds online (For Wifi/DVB-T Dongles)
- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)
- Wifi Realtek, Ralink, Mediatek Supported
- IPTV Support with Built-in
1300 Free To Air FREE IPTV Channels from their broadcaster
100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)
DM900UHD :
-
Is it possible to install other images such
-
Is it possible to install other images such
Barryallen does not install in any way
-
You can install images via the USB Stick, I would do that way... an image that has support of Wifi (most of them), using a good Wifi Dongle (Ralink/Mediatek or Realtek chipsets are the most supported).
Code
Display MoreFlash any image on Dreambox (DM900), 1- Format USB with Fat-32 2- Label usb "DREAMFLASH" 3- Copy image to USB Drive 4- Rename image "dreambox-image-dm900.tar.xz" 5- Insert USB to receiver 6- Now from standby menu select Recovery Mode or Shut Down your receiver and then press and hold touch button of receiver or from telnet give any one of below commands to-the-rescue or echo "rescue" >> /proc/stb/fp/boot_mode reboot
The OpenPLi below has a last variety of USB Wifis compatible,
TS
DM900UHD : OpenPLi 8.xStar 20240319 GSt 1.20.5 (Original)
openpli-enigma2-8xstar-dm900.root.tar.bz2
OpenPLi Release by OpenPLi Team, March 19th, 2024
- Python 3.9.9
- GStreamer 1.20.5
- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (Dash Support)
- EPGImport Built-in
- AC3+/DDP/EAC3 support
- Feeds online (For Wifi/DVB-T Dongles)
- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)
- Wifi Realtek, Ralink, Mediatek Supported
- IPTV Support with Built-in
1300 Free To Air FREE IPTV Channels from their broadcaster
100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)
DM900UHD :
You say to rename "Rename image "dreambox-image-dm900.tar.xz"". How do I rename a file that has another extension?
http://openpli8xstar.japhar.net/OpenPLi8xstar/openpli-enigma2-8xstar-dm900_web.zip
-
Barryallen does not install in any way
Bro, so you're doing something wrong. I have Barry Allen installed in two DM900 and DM820, exactly the one that I offered you.
-
You can install images via the USB Stick, I would do that way... an image that has support of Wifi (most of them), using a good Wifi Dongle (Ralink/Mediatek or Realtek chipsets are the most supported).
Code
Display MoreFlash any image on Dreambox (DM900), 1- Format USB with Fat-32 2- Label usb "DREAMFLASH" 3- Copy image to USB Drive 4- Rename image "dreambox-image-dm900.tar.xz" 5- Insert USB to receiver 6- Now from standby menu select Recovery Mode or Shut Down your receiver and then press and hold touch button of receiver or from telnet give any one of below commands to-the-rescue or echo "rescue" >> /proc/stb/fp/boot_mode reboot
The OpenPLi below has a last variety of USB Wifis compatible,
TS
DM900UHD : OpenPLi 8.xStar 20240319 GSt 1.20.5 (Original)
openpli-enigma2-8xstar-dm900.root.tar.bz2
OpenPLi Release by OpenPLi Team, March 19th, 2024
- Python 3.9.9
- GStreamer 1.20.5
- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (Dash Support)
- EPGImport Built-in
- AC3+/DDP/EAC3 support
- Feeds online (For Wifi/DVB-T Dongles)
- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)
- Wifi Realtek, Ralink, Mediatek Supported
- IPTV Support with Built-in
1300 Free To Air FREE IPTV Channels from their broadcaster
100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)
DM900UHD :
You say to rename "Rename image "dreambox-image-dm900.tar.xz"". How do I rename a file that has another extension?
Open the zip file, inside you have a tar.xz or tar.gz, rename into dreambox-image-dm900.tar and what it is (xz or gz). Use then that file for the flashing with USB Memory stick.
TS
-
You can install images via the USB Stick, I would do that way... an image that has support of Wifi (most of them), using a good Wifi Dongle (Ralink/Mediatek or Realtek chipsets are the most supported).
Code
Display MoreFlash any image on Dreambox (DM900), 1- Format USB with Fat-32 2- Label usb "DREAMFLASH" 3- Copy image to USB Drive 4- Rename image "dreambox-image-dm900.tar.xz" 5- Insert USB to receiver 6- Now from standby menu select Recovery Mode or Shut Down your receiver and then press and hold touch button of receiver or from telnet give any one of below commands to-the-rescue or echo "rescue" >> /proc/stb/fp/boot_mode reboot
The OpenPLi below has a last variety of USB Wifis compatible,
TS
DM900UHD : OpenPLi 8.xStar 20240319 GSt 1.20.5 (Original)
openpli-enigma2-8xstar-dm900.root.tar.bz2
OpenPLi Release by OpenPLi Team, March 19th, 2024
- Python 3.9.9
- GStreamer 1.20.5
- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (Dash Support)
- EPGImport Built-in
- AC3+/DDP/EAC3 support
- Feeds online (For Wifi/DVB-T Dongles)
- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)
- Wifi Realtek, Ralink, Mediatek Supported
- IPTV Support with Built-in
1300 Free To Air FREE IPTV Channels from their broadcaster
100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)
DM900UHD :
You say to rename "Rename image "dreambox-image-dm900.tar.xz"". How do I rename a file that has another extension?
Open the zip file, inside you have a tar.xz or tar.gz, rename into dreambox-image-dm900.tar and what it is (xz or gz). Use then that file for the flashing with USB Memory stick.
TS
in any case, for now I have managed to install a more recent one with your system. the Enigmaversion: 4.3.3r3-2021-10-29
Imageversion: Experimental 2021-10-29
Now I'll try to do as you told me in your last piece of advice. Thanks for everything, then I will also try to install Barry Allen
-
Thanks Toysoft I solved it with your system. I was going crazy, I had been trying for many days. In any case, thanks to both of you!
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!