OpenATV-7.4-DM800HDV2-SIM2-30/04/2024
-
- Dreambox Clone Sim 2
- monuser
- Thread is marked as Resolved.
There are 9 replies in this Thread which was already clicked 3,742 times. The last Post () by Hannibal_Lecter.
-
-
Anyone was checked it. is it work smoothly?
-
Display More
OpenATV-7.4
This Image workin only Colon SIM2
INSIDE & OUTSIDE
DM800HDV2
30/04/2024
The image runs on my Dm800seV2 sim 2.20 (sunray box), but it does not detect any tuner or the inbuilt wifi. Luckily the other image also posted by mouser, the OpenATV7.3 backup image does work better with the BCM4505 tuner. I was not so lucky with wifi, but at least I got the box working.
A tip for anyone who tries these images and want a quick way to install softcams, then open a telnet session from your computer and connect to the box and enter the following command:
wget -O - -q http://updates.mynonpublic.com/oea/feed | bash
(The above solution is from this thread RE: OpenATV SoftCam Feed)
Restart the box and then you will have the option to download softcams in the extension feed.
edit by mods
-
Display MoreDisplay More
OpenATV-7.4
This Image workin only Colon SIM2
INSIDE & OUTSIDE
DM800HDV2
30/04/2024
The image runs on my Dm800seV2 sim 2.20 (sunray box), but it does not detect any tuner or the inbuilt wifi. Luckily the other image also posted by mouser, the OpenATV7.3 backup image does work better with the BCM4505 tuner. I was not so lucky with wifi, but at least I got the box working.
A tip for anyone who tries these images and want a quick way to install softcams, then open a telnet session from your computer and connect to the box and enter the following command:
wget -O - -q http://updates.mynonpublic.com/oea/feed | bash
(The above solution is from this thread RE: OpenATV SoftCam Feed)
Restart the box and then you will have the option to download softcams in the extension feed.
edit by mods
i approved your post but
use tag for live link..
and introduce in section forum for welcome :)
regards -
Display MoreDisplay More
OpenATV-7.4
This Image workin only Colon SIM2
INSIDE & OUTSIDE
DM800HDV2
30/04/2024
The image runs on my Dm800seV2 sim 2.20 (sunray box), but it does not detect any tuner or the inbuilt wifi. Luckily the other image also posted by mouser, the OpenATV7.3 backup image does work better with the BCM4505 tuner. I was not so lucky with wifi, but at least I got the box working.
A tip for anyone who tries these images and want a quick way to install softcams, then open a telnet session from your computer and connect to the box and enter the following command:
wget -O - -q http://updates.mynonpublic.com/oea/feed | bash
(The above solution is from this thread RE: OpenATV SoftCam Feed)
Restart the box and then you will have the option to download softcams in the extension feed.
edit by mods
There is a very limited number of images for the Sim2 in version DM800HDseV2, because very quickly after the release of that box the sim2 factory closed and all supported ended...
It's still an excellent box, with large RAM and Flash, so it's capable of doing a lot, we still support it with our OpenPLi 8.xStar and OpenPLI 9.xStar images that bring this box to the level of the top of DMM/VU+, such as DM9x0 or DreamOne/Two, with the exact same image (and functionnalities such as Streaming/IPTV/Dash/iCam etc).
TS
-
The image takes a long time to launch, but once it's up and running, it works well. It's a shame that vhannibal's channel list doesn't work. I installed it, configured the trial tuner, and downloaded the settings list, but unfortunately, the channels won't open, regardless of whether they're free or not. Has anyone had the same result?
-
only free FTA channels open, set your tuner configs correctly
and also do a channel search
-
Yes, I know that. Thanks. I reflashed the image. I'll be able to check your advice later.
Y
-
-
i am glad to read this enjoy
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
