Well here we go, the eagerly awaited Mars firmware for the GT Combo is attached. ( it is as yet untested by me)
PLEASE REMEMBER THE FORUM RULES --------- WE DO NOT SUPPORT PAYSERVERS ON THIS FORUM,
SO USE GOOGLE FOR ANY PAYSERVER RELATED QUESTIONS.
Mars firmware for GT Media Combo 4k
- jenseneverest
- Thread is marked as Resolved.
-
stay away for now, it's not possible to go back to previous firmware (except with some complicated tricks).
the combo goes into reboot loop on 4:2:2 channels, autobiss is working so and so.
my advice, wait for a better version
-
stay away for now, it's not possible to go back to previous firmware (except with some complicated tricks).
the combo goes into reboot loop on 4:2:2 channels, autobiss is working so and so.
my advice, wait for a better version
Dose it still have a useable oscam ?
-
Display More
stay away for now, it's not possible to go back to previous firmware (except with some complicated tricks).
the combo goes into reboot loop on 4:2:2 channels, autobiss is working so and so.
my advice, wait for a better version
Dose it still have a useable oscam ?
nope, no access to oscam, it's embedded in some new app called Apollo
-
Some people cant fix mars software it stops on first screen . I think before installing mars software u should be working on latest officall frimware 1.29 as i see on telegram.
-
I had the latest installed so I didn't have problem installing mars
-
I had the latest installed so I didn't have problem installing mars
installed without issue from old firmware as well
Where the hell is the SAT button...... How to select different sats ?
this firmware is like a cross between what i have on the DRS2 and Qviart Combo (also crapheaps lol)
-
Display More
I had the latest installed so I didn't have problem installing mars
installed without issue from old firmware as well
Where the hell is the SAT button...... How to select different sats ?
this firmware is like a cross between what i have on the DRS2 and Qviart Combo (also crapheaps lol)
There is no way to change sat, i noticed that too
I tried with v8x remote that has a sat button but still no way
-
There is no way to change sat, i noticed that too
I tried with v8x remote that has a sat button but still no wayThanks, so its not just me then.....you were right.....don't bother!!
this is still a long long way off from being useable, let alone stable.
-
hello i tried upgrading to this{mars} software on my gtcombo and now its stuck on the 'software is inntializing, please wait'
how can i fix it now????helllp
-
hello i tried upgrading to this{mars} software on my gtcombo and now its stuck on the 'software is inntializing, please wait'
how can i fix it now????helllp
Others have reported issues as well, try pulling out the power cable and rebooting.....if that fails then im afraid it will mean a reflash / recovery via usb.
-
thank you
how can i reflash it via usb?
i used the reset button and extracted the orginal update file and its ok and restored now
-
Display More
I had the latest installed so I didn't have problem installing mars
installed without issue from old firmware as well
Where the hell is the SAT button...... How to select different sats ?
this firmware is like a cross between what i have on the DRS2 and Qviart Combo (also crapheaps lol)
What no sw before u install mars. All say that u should be on sw no 1.29 latest sw to get mars without any issues. And u say its work on old frimware. Do u remember no of sw before installing mars
-
hello i tried upgrading to this{mars} software on my gtcombo and now its stuck on the 'software is inntializing, please wait'
how can i fix it now????helllp
Try this
👌 Here is a corrected way to Fix Broken Device in Welcome :
1. Turn off the device.
2. Press and hold the button in the back of the device See Photo.
3. While holding the button, turn on the device.
4. Continue holding the button for approximately 5 seconds.
5. Release the button and wait for the device to turn on.
-
official bug log from Mars team
1:Motor Setting USALS is Not working.
2:No option to switch from one satellite to other satellite channels
3:No option to load Softcam.key file
4:Keys menu ADD or Edit only allow 8 characters
5: Not support 4.2.2 format channel
-
Display More
hello i tried upgrading to this{mars} software on my gtcombo and now its stuck on the 'software is inntializing, please wait'
how can i fix it now????helllp
Try this
👌 Here is a corrected way to Fix Broken Device in Welcome :
1. Turn off the device.
2. Press and hold the button in the back of the device See Photo.
3. While holding the button, turn on the device.
4. Continue holding the button for approximately 5 seconds.
5. Release the button and wait for the device to turn on.
This did not work for me. I just changed from wifi network to LAN, It worked, but then you needed to reload image file using usb cable first to restore broken initialisation.
-
Well i tried to recover mine with USB stick (4 of them) and i am so far failing miserably.....i have ordered a male/male USB cable to try recover via "USB-Burning Tool"
If that also fails, then its going in the bin.
-
Well i tried to recover mine with USB stick (4 of them) and i am so far failing miserably.....i have ordered a male/male USB cable to try recover via "USB-Burning Tool"
If that also fails, then its going in the bin.
tried the old usb 2.0 stick that finally worked on the dual ?
-
Well i tried to recover mine with USB stick (4 of them) and i am so far failing miserably.....i have ordered a male/male USB cable to try recover via "USB-Burning Tool"
If that also fails, then its going in the bin.
tried the old usb 2.0 stick that finally worked on the dual ?
Yup that was the one i tried first
i got there in the end, with USB burning tool, i have done a quick how to for anyone else HERE if the usb stick method also fails for you.
-
Is streaming to other devices still disabled on these devices?
GTMEDIA
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
