Problem installing new software on SHD8900

There are 11 replies in this Thread which was already clicked 2,045 times. The last Post () by jenseneverest.

    Receiver SHD8900
    Can't install anything from a USB stick. Tried different usb sticks and different software files. The result is always the same.
    Process description:
    1. The receiver is turned off
    2. USB flash drive into the USB slot of the receiver
    3. I press the <OK> button on the front panel.
    4. I hold down the button and turn on the receiver
    5. I wait until <Fork> appears on the screen
    6. I deprecate the <OK> button and press the <Right> button
    7. The text <Fact> appears on the screen
    8. I press the <OK> button again
    9. The text <Fact> is still on the screen
    10. After about 15 seconds, the message <7 70> will appear on the screen
    Telnet shows such data. (The Tera Term telnet program has been used)
    -------------------------------------------------- --------------------------------------------------

    use kingston or sandisk usb 4 or 8 GB


    Make sure that the folder is not inside another folder, and there is no any Foldr it except Foldr plugin only


    After unzip the attached file, transfer the file to the usb and place it in the device. & so on as you Learn to install

    °Never change a running system°






    No it is not.
    There is only one directory <enigma> on the usb stick, which contains two files <e2jffs2.img> and <uImage>.
    I have previously installed new software on the same receiver and everything has worked.

    check all usb drives that u have one more time, again format in fat32. I remember with 2 or 3 usb flash drives it didnt'work, one or two only was ok


    and folder name should be

    enigma2

    not

    enigma

    Edited once, last by jeste ().

    Thanks 1

    It's all been done many times. No results.
    I'm not a complete newbie to this receiver, I've changed the receiver software several times and everything has worked. Now the receiver sat for about 2 months and I turned off the working receiver. I am also currently using OpenPLI 8.1 on this receiver and it works fine. Now I tried to install OpenATV 6.2 and then I got errors, I tried a different USB stick, a full formatting done beforehand and tried installing different software. It won't work anymore. That's why I ask the wisest people who know the content of the software for advice on what's wrong. Could there be a faulty Uboot file or are there other versions..?

    • Official Post
    Quote from hillar26

    No it is not.
    There is only one directory <enigma> on the usb stick, which contains two files <e2jffs2.img> and <uImage>.
    I have previously installed new software on the same receiver and everything has worked.

    Its been very many years since i had an STI type device...... so i am assuming you are attempting to flash with the correct files and the correct procedure, from your other posts it looks as through you have done it several times before.


    Your log has this:

    Code
    USB: scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found

** Can't read from device 0 **

** Unable to use usb 0:1 for fatload **

    Its not happy with your usb stick, try low level format the usb stick first

    https://www.easeus.com/partiti…ery%20almost%20impossible.

    You opened a topic in the section on the 7162 processor, and you own a 7111 processor device, Although there is a special section for that in the forum. Are you sure that the software you are trying to install suitable to your processor?


    You did not explain the problem in a way that helps solve it

    Are you working on the Spark system on your device and trying to install the Enigma 2 version on the internal flash drive in the part designated for the Enigma 2 system on your device?

    First, refer to my topic in the forum to find out the correct way to do this


    Thread
    Explain Installing raw image Enigma2 or delete it or make a backup on the internal flash of Spark devices​
    :welcome41:


    ?thumbnail=1

    923095066.gif


    139070-e02d23-jpg

    138268-6a27f64e2e9a32c7b42-png


    136415-cfa5e79e93be8a805743a6c6-png

    explain Installing raw image Enigma2 or delete it or make a backup on the internal flash of Spark devices


    138268-6a27f64e2e9a32c7b42-png

    in Spark System

    The most important plugin for the service of Enigma2 are installed
    On Spark to erase Enigma2 & installed it & make a backup is.

    WLToolv02 / plugin_e2upgrade.s

    First /is WLToolv02
    To clear the Enigma2 while you are on the spark System

    The second / plugin_e2upgrade.s
    To installed Enigma2 in internal flash or make a backup for it while you are on the spark System


    If you do not have this…
    ahmed gazye



    If the problem still exists, try first reinstalling the software for the Spark system via usb Through the Spark system

    You can do this through my topic in the forum at the following link.


    Thread
    Amiko Alien SHD 8900 ​ spark sti 7111 Orginal Firmware 1.2.83
    :welcome41:


    ?thumbnail=1


    923095066.gif


    138065-f2cb0a24ea55034f73a25-png


    898672957.png137384-300c7dbc8b328d012127-png
    Orginal-Firmware 1.2.83 für den Amiko SHD-8900 Alien for spark sti 7111



    898672957.png
    This is an old version, Not available for many



    use kingston or sandisk usb 4 or 8 GB



    Make sure that the folder is not inside another folder, and there is no any Foldr it except Foldr plugin only.




    After unzip the attached file, transfer the file to the usb and place it in the device. & so on as you Learn to install

    ?thumbnail=1




     Good luck




    310271357.gif 310271357.gif
    668584774.png
    310271357.gif 310271357.gif





    136115-1999e-png
    ahmed gazye


    If the problem still exists, this means that the Spark system has lost usb drives

    The solution is to use the rescue_image in the method described in my topic at the following link


    rescue_image

    Thread
    Amiko Alien SHD 8900 ​spark sti 7111 Rescue Image v1.2.65
    :welcome41:


    ?thumbnail=1

    linuxsat-support.com/cms/attachment/138277/

    138268-6a27f64e2e9a32c7b42-png

    136415-cfa5e79e93be8a805743a6c6-png
    spark_rescue_image_Amiko_SHD-8900_v1.2.65 for sti 7111



    138268-6a27f64e2e9a32c7b42-png




    First, remove any external flash that is installed on the device

    Second, start with this solution and implement what is contained in it
    Close the device from the power button in the back and Click on the ok from the front of the receiver for 5 seconds, then not leave ok, and

    open the device from power button in the back,Until it Appears on the screen is forc supported you from Ok, then you Click on…
    ahmed gazye

    method

    Thread
    Method of passing the rescue-image​​ for Spark devices using Cisco TFTP Server
    :welcome41:


    ?thumbnail=1

    138277-9119308804f688dc1-png


    linuxsat-support.com/cms/attachment/139070/


    138268-6a27f64e2e9a32c7b42-png

    136415-cfa5e79e93be8a805743a6c6-png


    Method of passing the rescue-image for Spark devices using Cisco TFTP Server


    138268-6a27f64e2e9a32c7b42-png
    In some cases Spark devices not accept soft rescue in by usb

    Most of the problems of not accepting the rescue-image will be a defect from the usb that the device cannot read from
    So we will use passing the rescue-image for Spark devices using Cisco TFTP Server



    We connect the computer with the receiver with a regular Ethernet network cord




    3t6htZH.jpg









    Then we enter the network settings into…
    ahmed gazye

    After the process is successful,install firmware

    firmware

    Thread
    Amiko Alien SHD 8900 ​ spark sti 7111 Orginal Firmware 1.2.83
    :welcome41:


    ?thumbnail=1


    923095066.gif


    138065-f2cb0a24ea55034f73a25-png


    898672957.png137384-300c7dbc8b328d012127-png
    Orginal-Firmware 1.2.83 für den Amiko SHD-8900 Alien for spark sti 7111



    898672957.png
    This is an old version, Not available for many



    use kingston or sandisk usb 4 or 8 GB



    Make sure that the folder is not inside another folder, and there is no any Foldr it except Foldr plugin only.




    After unzip the attached file, transfer the file to the usb and place it in the device. & so on as you Learn to install

    ?thumbnail=1




     Good luck




    310271357.gif 310271357.gif
    668584774.png
    310271357.gif 310271357.gif





    136115-1999e-png
    ahmed gazye

Help and support for Spark STI 7111 receivers.

Support for ADOH R1, Amiko Alien SHD 8900, Amiko Alien Mini, Goldmaster HD 1200, Golden Media 990 CR HD PVR Spark LX, Golden Media Spark Reloaded, Edision Argus Pingulux, Edision Argus Pingulux Plus, Galaxy Innovations GI S, SAB Unix F+ Solo, Dynavision Spark, Dynavision Spark Plus, Fulan Spark I+, Truman Premier 1+, Samsat Linux 1, Startrack SRT 2020 HD, FullHD FH 2020 HD, Yumatu Spark, Visionnet Hammer, Visionnet Fireball, Superbox S750, Sogno Spark Revolution, Spark STI 7111 Receivers.