Display Morehi, any plan for a new update/backup in the near future (sneak peak)
We compiled it few weeks ago, we don't do backups... we do clean images.
TS
you mean August post (first post)
Display Morehi, any plan for a new update/backup in the near future (sneak peak)
We compiled it few weeks ago, we don't do backups... we do clean images.
TS
you mean August post (first post)
Display MoreDisplay Morehi, any plan for a new update/backup in the near future (sneak peak)
We compiled it few weeks ago, we don't do backups... we do clean images.
TS
you mean August post (first post)
Yes, this is the last compile for dreamone/dreamtwo, no improvement was done since, and so didn't needed a new compile,
TS
I have tested it before is like openatv you can't control volume if audio is ac3
I test it on dmtwo
We updated the volume control on DVB, but on the IPTV/Streaming GStreamer is not controlable (it's libraries from DMM) as it's 0 or 100... we added Exteplayer3 that should work better also for the volume level for streams.
TS
را
Display MoreI have tested it before is like openatv you can't control volume if audio is ac3
I test it on dmtwo
We updated the volume control on DVB, but on the IPTV/Streaming GStreamer is not controlable (it's libraries from DMM) as it's 0 or 100... we added Exteplayer3 that should work better also for the volume level for streams.
TS
Why doesn't Team Jaafar create an open-source image for Dreambox products like OpenATV, providing regular updates and online updates?
Display Moreرا
Display MoreI have tested it before is like openatv you can't control volume if audio is ac3
I test it on dmtwo
We updated the volume control on DVB, but on the IPTV/Streaming GStreamer is not controlable (it's libraries from DMM) as it's 0 or 100... we added Exteplayer3 that should work better also for the volume level for streams.
TS
Why doesn't Team Jaafar create an open-source image for Dreambox products like OpenATV, providing regular updates and online updates?
We don't have the ressources, and there is already openpli that is opensource, which our image is just a compile for boxes they don't support with public recipes posted on the past 10 years.
TS
را
Display MoreDisplay Moreرا
Display MoreI have tested it before is like openatv you can't control volume if audio is ac3
I test it on dmtwo
We updated the volume control on DVB, but on the IPTV/Streaming GStreamer is not controlable (it's libraries from DMM) as it's 0 or 100... we added Exteplayer3 that should work better also for the volume level for streams.
TS
Why doesn't Team Jaafar create an open-source image for Dreambox products like OpenATV, providing regular updates and online updates?
We don't have the ressources, and there is already openpli that is opensource, which our image is just a compile for boxes they don't support with public recipes posted on the past 10 years.
TS
If possible, please create a plugin similar to Bari Allen that allows for multi-booting DreamOS and Open... images simultaneously
Display Moreرا
Display MoreDisplay Moreرا
Display MoreI have tested it before is like openatv you can't control volume if audio is ac3
I test it on dmtwo
We updated the volume control on DVB, but on the IPTV/Streaming GStreamer is not controlable (it's libraries from DMM) as it's 0 or 100... we added Exteplayer3 that should work better also for the volume level for streams.
TS
Why doesn't Team Jaafar create an open-source image for Dreambox products like OpenATV, providing regular updates and online updates?
We don't have the ressources, and there is already openpli that is opensource, which our image is just a compile for boxes they don't support with public recipes posted on the past 10 years.
TS
If possible, please create a plugin similar to Bari Allen that allows for multi-booting DreamOS and Open... images simultaneously
You have to check with OpenaTV/Captain (he did something to install more than 1 image), in our side we don't support multiboot.
TS
thanks for the valuable information and support of the image
I gave you image a try month ago but on installation the interface look very old (do not get offended)
what skin you recommend does it support UHD skins ?
i am thinking to give it a new trial
Use the standard skins, also available on the feeds,
We compile the image for these boxes for everyone to use, from SD to UHD, so if we setup an UHD skin,... we loose everyone SD and HD. But if we use an SD/HD skin, then it will work for everybody... and sorry, I don't have an UHD TV... only HDReady... so you can "upgrade" but sure not "downgrade" if we start with UHD... it would be very "egoistic" to have UHD be default, removing the possibility to everyone lower than UHD to have a working image on their box... so just install skins available on the feeds, that are UHD.
TS
Display Morethanks for the valuable information and support of the image
I gave you image a try month ago but on installation the interface look very old (do not get offended)
what skin you recommend does it support UHD skins ?
i am thinking to give it a new trial
Use the standard skins, also available on the feeds,
We compile the image for these boxes for everyone to use, from SD to UHD, so if we setup an UHD skin,... we loose everyone SD and HD. But if we use an SD/HD skin, then it will work for everybody... and sorry, I don't have an UHD TV... only HDReady... so you can "upgrade" but sure not "downgrade" if we start with UHD... it would be very "egoistic" to have UHD be default, removing the possibility to everyone lower than UHD to have a working image on their box... so just install skins available on the feeds, that are UHD.
TS
is this Image 2.6 image (I know its python 3 )
Display MoreDisplay Morethanks for the valuable information and support of the image
I gave you image a try month ago but on installation the interface look very old (do not get offended)
what skin you recommend does it support UHD skins ?
i am thinking to give it a new trial
Use the standard skins, also available on the feeds,
We compile the image for these boxes for everyone to use, from SD to UHD, so if we setup an UHD skin,... we loose everyone SD and HD. But if we use an SD/HD skin, then it will work for everybody... and sorry, I don't have an UHD TV... only HDReady... so you can "upgrade" but sure not "downgrade" if we start with UHD... it would be very "egoistic" to have UHD be default, removing the possibility to everyone lower than UHD to have a working image on their box... so just install skins available on the feeds, that are UHD.
TS
is this Image 2.6 image (I know its python 3 )
Yes, it's Python 3, naturally. All images on the link are latest with Python 3.9.9, Enigma2 Develop release.
OpenPLi 8xStar IPTV - Our Dreambox World - Japhar Sim Forum - http://www.japhar.com/ - SuperSim3
We use the receipes of DMM for the DreamOne/Two, and the OE of OpenPLi 8.x.
TS
Display MoreDisplay MoreDisplay Morethanks for the valuable information and support of the image
I gave you image a try month ago but on installation the interface look very old (do not get offended)
what skin you recommend does it support UHD skins ?
i am thinking to give it a new trial
Use the standard skins, also available on the feeds,
We compile the image for these boxes for everyone to use, from SD to UHD, so if we setup an UHD skin,... we loose everyone SD and HD. But if we use an SD/HD skin, then it will work for everybody... and sorry, I don't have an UHD TV... only HDReady... so you can "upgrade" but sure not "downgrade" if we start with UHD... it would be very "egoistic" to have UHD be default, removing the possibility to everyone lower than UHD to have a working image on their box... so just install skins available on the feeds, that are UHD.
TS
is this Image 2.6 image (I know its python 3 )
Yes, it's Python 3, naturally. All images on the link are latest with Python 3.9.9, Enigma2 Develop release.
http://openpli8xstar.japhar.net/OpenPLi/
We use the receipes of DMM for the DreamOne/Two, and the OE of OpenPLi 8.x.
TS
you always impress me with your cool replies and your tolerance thank you !
Display MoreDisplay MoreDisplay MoreDisplay Morethanks for the valuable information and support of the image
I gave you image a try month ago but on installation the interface look very old (do not get offended)
what skin you recommend does it support UHD skins ?
i am thinking to give it a new trial
Use the standard skins, also available on the feeds,
We compile the image for these boxes for everyone to use, from SD to UHD, so if we setup an UHD skin,... we loose everyone SD and HD. But if we use an SD/HD skin, then it will work for everybody... and sorry, I don't have an UHD TV... only HDReady... so you can "upgrade" but sure not "downgrade" if we start with UHD... it would be very "egoistic" to have UHD be default, removing the possibility to everyone lower than UHD to have a working image on their box... so just install skins available on the feeds, that are UHD.
TS
is this Image 2.6 image (I know its python 3 )
Yes, it's Python 3, naturally. All images on the link are latest with Python 3.9.9, Enigma2 Develop release.
http://openpli8xstar.japhar.net/OpenPLi/
We use the receipes of DMM for the DreamOne/Two, and the OE of OpenPLi 8.x.
TS
you always impress me with your cool replies and your tolerance thank you !
I do this as a passion... enjoying to share "solution" which are what I can have with the time I can dedicate to it,
Have a nice evening,
TS
را
Display MoreDisplay MoreDisplay MoreDisplay MoreDisplay Morethanks for the valuable information and support of the image
I gave you image a try month ago but on installation the interface look very old (do not get offended)
what skin you recommend does it support UHD skins ?
i am thinking to give it a new trial
Use the standard skins, also available on the feeds,
We compile the image for these boxes for everyone to use, from SD to UHD, so if we setup an UHD skin,... we loose everyone SD and HD. But if we use an SD/HD skin, then it will work for everybody... and sorry, I don't have an UHD TV... only HDReady... so you can "upgrade" but sure not "downgrade" if we start with UHD... it would be very "egoistic" to have UHD be default, removing the possibility to everyone lower than UHD to have a working image on their box... so just install skins available on the feeds, that are UHD.
TS
is this Image 2.6 image (I know its python 3 )
Yes, it's Python 3, naturally. All images on the link are latest with Python 3.9.9, Enigma2 Develop release.
http://openpli8xstar.japhar.net/OpenPLi/
We use the receipes of DMM for the DreamOne/Two, and the OE of OpenPLi 8.x.
TS
you always impress me with your cool replies and your tolerance thank you !
I do this as a passion... enjoying to share "solution" which are what I can have with the time I can dedicate to it,
Have a nice evening,
TS
You are a highly intelligent and cultured individual. I have always followed your posts and found them very enlightening.""I have always admired your intellect and refined taste. I follow your posts regularly and find them to be very stimulating.
Display MoreDisplay MoreDisplay MoreDisplay MoreDisplay Morethanks for the valuable information and support of the image
I gave you image a try month ago but on installation the interface look very old (do not get offended)
what skin you recommend does it support UHD skins ?
i am thinking to give it a new trial
Use the standard skins, also available on the feeds,
We compile the image for these boxes for everyone to use, from SD to UHD, so if we setup an UHD skin,... we loose everyone SD and HD. But if we use an SD/HD skin, then it will work for everybody... and sorry, I don't have an UHD TV... only HDReady... so you can "upgrade" but sure not "downgrade" if we start with UHD... it would be very "egoistic" to have UHD be default, removing the possibility to everyone lower than UHD to have a working image on their box... so just install skins available on the feeds, that are UHD.
TS
is this Image 2.6 image (I know its python 3 )
Yes, it's Python 3, naturally. All images on the link are latest with Python 3.9.9, Enigma2 Develop release.
http://openpli8xstar.japhar.net/OpenPLi/
We use the receipes of DMM for the DreamOne/Two, and the OE of OpenPLi 8.x.
TS
you always impress me with your cool replies and your tolerance thank you !
I do this as a passion... enjoying to share "solution" which are what I can have with the time I can dedicate to it,
Have a nice evening,
TS
We hope you share the dmm two one audio patch 😁 so can we build other oe image for that boxes
Display MoreI do this as a passion... enjoying to share "solution" which are what I can have with the time I can dedicate to it,
Have a nice evening,
TS
We hope you share the dmm two one audio patch 😁 so can we build other oe image for that boxes
This is impossible, due to agreement we have with authors of this patch. If we were able jointly to build the audio, we are surprised that no other team was also capable of doing it.
We already teamed and build OpenATV, PurE2 and OpenBH (Private compile), and us with our OpenPLi 8.xStar, this is the only thing we were approved to do.
So if other teams want it, they have to build their own (we know who these teams are... who claim all was due to them stealing from all teams and creating frictions on the open images world, same who previously spit out to us from their "Empire"... as they could not steal what we all were doing, PurE2 and our OpenPLi/OpenBH). It's also funny to see when we provide correct informations to the Empire, their way to react wanting all to be removed, cleared, zeroed, as their claims are more than false and also biased. Let's recall that after stealing from all teams they named all "their" sources at their team name, as well as closed the sources they claimed were theirs, but previously stolen from other open teams... at the end who collaborated with OATV ?... us.
Ref : https://forums.openpli.org/top…ed-companiesteamspersons/
After reading this above topic link, you can thank who created this situation. Anyway there is a limit of using closed source as all this is related to drivers as all manufacturers do them closed source and natively such source is closed source.
TS
P.S.: But you are free to take any of the images published that contains our audio driver patch and do your "own version" adapted to your needs, or even for example give some inputs to openatv (as AI subtitles Translation Plugin people did) to have it with some extra features you would like. I think this is probably the easiest way, as building an audio driver as we seen we were the only team able to get it working on DreamOne/Two.
Display MoreDisplay MoreI do this as a passion... enjoying to share "solution" which are what I can have with the time I can dedicate to it,
Have a nice evening,
TS
We hope you share the dmm two one audio patch 😁 so can we build other oe image for that boxes
This is impossible, due to agreement we have with authors of this patch. If we were able jointly to build the audio, we are surprised that no other team was also capable of doing it.
We already teamed and build OpenATV, PurE2 and OpenBH (Private compile), and us with our OpenPLi 8.xStar, this is the only thing we were approved to do.
So if other teams want it, they have to build their own (we know who these teams are... who claim all was due to them stealing from all teams and creating frictions on the open images world, same who previously spit out to us from their "Empire"... as they could not steal what we all were doing, PurE2 and our OpenPLi/OpenBH). It's also funny to see when we provide correct informations to the Empire, their way to react wanting all to be removed, cleared, zeroed, as their claims are more than false and also biased. Let's recall that after stealing from all teams they named all "their" sources at their team name, as well as closed the sources they claimed were theirs, but previously stolen from other open teams... at the end who collaborated with OATV ?... us.
Ref : https://forums.openpli.org/top…ed-companiesteamspersons/
After reading this above topic link, you can thank who created this situation. Anyway there is a limit of using closed source as all this is related to drivers as all manufacturers do them closed source and natively such source is closed source.
TS
P.S.: But you are free to take any of the images published that contains our audio driver patch and do your "own version" adapted to your needs, or even for example give some inputs to openatv (as AI subtitles Translation Plugin people did) to have it with some extra features you would like. I think this is probably the easiest way, as building an audio driver as we seen we were the only team able to get it working on DreamOne/Two.
I know all that story and i know persian also he was always stolen others changes and thems work
I work for no team is just a hobby that i do when i have a free time and i like to build some image that not support my box like egami openbh
Jafaar team was and still always give hardware and firmware solution and thank you very much for all what you have shared
And if their is possible share that patch as closed source like ai subs sure if you want
I really want to build openbh to dm2 and not convert openatv with openbh theme like storm do
Display MoreI know all that story and i know persian also he was always stolen others changes and thems work
I work for no team is just a hobby that i do when i have a free time and i like to build some image that not support my box like egami openbh
Jafaar team was and still always give hardware and firmware solution and thank you very much for all what you have shared
And if their is possible share that patch as closed source like ai subs sure if you want
I really want to build openbh to dm2 and not convert openatv with openbh theme like storm do
I wish Diable all your wishes come true I think the golden time of Dream Multimedia (dream one/two) will be back again
Display MoreDreamTwo : OpenPLi 8.xStar 20240804 GSt 1.20.5 - Dash/FFMpeg/Exteplayer3 and iCam Support (Original)
openpli-enigma2-8xstar-dreamtwo_20240804_Original.rootfs.tar.gz
OpenPLi Release by OpenPLi Team, August 4th, 2024
- Python 3.9.9
- GStreamer 1.20.5
- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (No Dash Support yet)
- EPGImport Built-in
- AC3+/DDP/EAC3 support
- Feeds online (For Wifi/DVB-T Dongles)
- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)
- Wifi Realtek, Ralink, Mediatek Supported
- CI+ and IPTV Support Built-in
1300 Free To Air FREE IPTV Channels from their broadcaster
100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)
DreamTwo :
can you give it as web.zip
we are sending it as dreambox two gpt wep.zip openatv 7.4 image
![]()
Download DreamTwo Dreambox Two 4K UHD Enigma2 Images. Team Support from OpenBh - OpenPLi Japhar - OpenATV - OpenVision - PurE2 - SatLodge
Don’t have an account yet? Register yourself now and be a part of our community!