Thank you TS again. I have found out that this error occurred when I selected in the main menu Information/Tuners in my OpenAtv7.3 image where it said that the recoding item is set to NO and the transcoding entry is set to NO. This is the full description of the information in this sub-menu and after a brief display of this information my receiver partly crashed (was displayed so called blue death) but not froze completely as usual accidently. I don't think this error is related to the problem of my receiver randomly freezing so that I have to investigate further.
Dreambox 920 motherboard defect
-
- Dreambox OpenATV
- General Support
- petr1963
- Thread is marked as Resolved.
-
-
Thank you TS again. I have found out that this error occurred when I selected in the main menu Information/Tuners in my OpenAtv7.3 image where it said that the recoding item is set to NO and the transcoding entry is set to NO. This is the full description of the information in this sub-menu and after a brief display of this information my receiver partly crashed (was displayed so called blue death) but not froze completely as usual accidently. I don't think this error is related to the problem of my receiver randomly freezing so that I have to investigate further.
Captain told me this should be fixed on the OpenATV 7.4, so it's an old bug that was fixed, and 7.3 ie EOL. Try to install the 7.4
TS
-
Hello TS, thanks again. I went to the cottage today and after turning on the receiver it worked for several hours fine and then suddenly froze completely again (after about three days in total) and at that moment the receiver temperature was about 62 degrees. There was no crash.log file only a debug.log file (I enabled to create it and attaching him), which covered the time when the receiver froze completely and randomly again, but there seems to be no relevant information to my problem).
-
Hello TS, thanks again. I went to the cottage today and after turning on the receiver it worked for several hours fine and then suddenly froze completely again (after about three days in total) and at that moment the receiver temperature was about 62 degrees. There was no crash.log file only a debug.log file (I enabled to create it and attaching him), which covered the time when the receiver froze completely and randomly again, but there seems to be no relevant information to my problem).
Ok, I see it was on the DM920UHD, using OpenATV 7.3,
18:05:35.4340 [StartEnigma] Receiver name = Dreambox DM920
18:05:35.4342 [StartEnigma] openATV version = 7.3
On which channel this happened ? DVB-C ? DVB-T ? DVB-S2 ? IPTV ?
I see also that you use Mutliboot,
18:05:35.2917 [Console] Processing command '/bin/mount' with arguments ['/bin/mount', '/dev/mmcblk0p1', '/tmp/MultiBoot_horu98lb'].
18:05:35.3381 [Console] Processing command '/bin/umount' with arguments ['/bin/umount', '/tmp/MultiBoot_horu98lb'].
18:05:35.3427 [Console] Processing command '/bin/mount' with arguments ['/bin/mount', '/dev/mmcblk0p3', '/tmp/MultiBoot_twu9cnnj'].
18:05:35.3497 [Console] Processing command '/bin/umount' with arguments ['/bin/umount', '/tmp/MultiBoot_twu9cnnj'].
18:05:35.3613 [Console] Processing command '/bin/mount' with arguments ['/bin/mount', '/dev/mtdblock2', '/tmp/MultiBoot_42m59ucz'].
18:05:35.4073 [Console] Processing command '/bin/umount' with arguments ['/bin/umount', '/tmp/MultiBoot_42m59ucz'].
- you were using a plugin ?
18:05:43.2224 [Skin] Skin resolution is 1280x720 and color depth is 32 bits.
18:05:43.2226 [Skin] Loading skin file '/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/CoolSkin/EMCMediaCenter_LCD.xml' complete.
- Or a dBackup autorun ?
18:05:44.0598 [dbackup} dreambox-data found on device: /dev/mmcblk0p3
18:05:44.0668 [33m[dBACKUP] PluginDescriptor: [<Plugins.Plugin.PluginDescriptor object at 0xae94a070>, <Plugins.Plugin.PluginDescriptor object at 0xae945f10>][m
18:05:44.0676 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:44.0717 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:44.0753 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:44.0904 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:44.0922 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
or..
18:05:44.9033 ====================================================================================================
18:05:44.9034 [NAVIGATION] Receiver does not start from Deep Standby - skip wake up detection
18:05:44.9035 ====================================================================================================
18:05:44.9083 [FrontPanelLed] /proc/stb/fp/led_brightness does not exist!
18:05:44.9086 [FrontPanelLed] /proc/stb/fp/led_color does not exist!
18:05:44.9090 [ABM-Scheduler][Scheduleautostart] reason(0), session <__main__.Session object at 0xae650310>
18:05:44.9091 [ABM-Scheduler][Scheduleautostart] AutoStart Enabled
18:05:44.9094 [ABM-Scheduler][AutoScheduleTimer] Schedule Disabled at Čt 8. srpna 2024, 18:05:44 CEST
18:05:44.9096 /usr/sbin/flash-fsbl
18:05:44.9096 No FSBL update required!
and there is a lot of errors on the Skin, did you use the image skin or one you installed ?
18:05:44.9900 [Skin] Processing screen 'SecondInfoBar', position=(0, 0), size=(1280x720) for module 'SecondInfoBar'.
18:05:45.1257 [Screen] Warning: Skin is missing element 'epg_description' in <class 'Screens.InfoBarGenerics.SecondInfoBar'>.
18:05:45.1264 [Screen] Warning: Skin is missing element 'FullDescription' in <class 'Screens.InfoBarGenerics.SecondInfoBar'>.
18:05:45.1265 [Screen] Warning: Skin is missing element 'channel' in <class 'Screens.InfoBarGenerics.SecondInfoBar'>.
18:05:45.1450 [ActionMap] Map context 'ChannelSelectEPGActions': Undefined actions 'epg', 'epg_long', 'info', 'info_long'.
18:05:45.1465 [Skin] Processing screen 'ChannelSelection', position=(0, 0), size=(1280x720) for module 'ChannelSelection'.
18:05:45.1763 [ActionMap] Map context 'ChannelSelectEPGActions': Undefined actions 'epg', 'epg_long', 'info', 'info_long'.
18:05:45.1786 [Skin] Processing screen 'SlimChannelSelection' from list 'SlimChannelSelection, SimpleChannelSelection, ChannelSelection', position=(0, 0), size=(1280x720) for module 'PiPZapSelection'.
18:05:45.1970 [ActionMap] Map context 'InfobarChannelSelection': Undefined actions 'ChannelMinusPressedLong', 'ChannelPlusPressedLong', 'openBouquets', 'openSatellites', 'openServiceList', 'switchChannelDownLong', 'switchChannelUpLong', 'volumeDown', 'volumeUp'.
18:05:45.1974 [ActionMap] Map context 'InfoBarMenuActions': Undefined actions 'showHDMIRecord', 'showSystemSetup'.
18:05:45.1982 [ActionMap] Map context 'InfobarEPGActions': Undefined actions 'showEventGuidePlugin', 'showInfobarOrEpgWhenInfobarAlreadyVisible'.
18:05:45.1988 [Skin] Processing screen 'RdsInfoDisplay', position=(0, 610), size=(1280x110) for module 'RdsInfoDisplay'.
18:05:45.2030 [Skin] No skin to read or screen to display.
18:05:45.2035 [Skin] Processing screen '<embedded-in-RdsInfoDisplaySummary>', position=(?, ?), size=(?x?) for module 'RdsInfoDisplaySummary'.
18:05:45.2037 [Screen] Showing screen 'RdsInfoDisplaySummary'.
18:05:45.2053 [Skin] Processing screen 'UnhandledKey', position=(40, 40), size=(71x71) for module 'UnhandledKey'.
18:05:45.2096 [Skin] Processing screen 'Dish', position=(900, 100), size=(132x255) for module 'Dish'.
18:05:45.2156 [ActionMap] Map context 'InfobarSubserviceSelectionActions': Undefined action 'subserviceSelection'.
18:05:45.2165 [Skin] Processing screen 'BufferIndicator', position=(540, 45), size=(320x35) for module 'BufferIndicator'.
18:05:45.2180 [ActionMap] Map context 'InfobarTimeshiftActions': Undefined actions 'restartTimeshift', 'seekBackManual', 'seekFwdManual', 'seekdef:1', 'seekdef:3', 'seekdef:4', 'seekdef:6', 'seekdef:7', 'seekdef:9'.
18:05:45.2195 [ActionMap] Map context 'InfobarSeekActions': Undefined actions 'okButton', 'pauseServiceYellow'.
18:05:45.2198 [ActionMap] Map context 'InfobarSeekActionsPTS': Undefined actions 'seekBackManual', 'seekFwdManual'.
18:05:45.2212 [Skin] Processing screen 'TimeshiftState', position=(190, 238), size=(900x230) for module 'TimeshiftState'.
18:05:45.2267 [Screen] Warning: Skin is missing element 'eventname' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:45.2272 [Screen] Warning: Skin is missing element 'speed' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:45.2273 [Screen] Warning: Skin is missing element 'statusicon' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:45.2274 [Screen] Warning: Skin is missing element 'PTSSeekBack' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:45.2275 [Screen] Warning: Skin is missing element 'PTSSeekPointer' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:46.6965 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.6974 [Skin] Processing screen 'Volume', position=(40, 40), size=(335x71) for module 'Volume'.
18:05:46.7013 [Screen] Warning: Skin is missing element 'VolumeText' in <class 'Screens.Volume.Volume'>.
18:05:46.7033 [Skin] Processing screen 'Mute', position=(40, 40), size=(71x71) for module 'Mute'.
18:05:46.7060 [Volume] Volume set to 100.
18:05:46.7062 [eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
18:05:46.7067 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7074 [Skin] Processing screen 'Processing', position=(340, 250), size=(600x220) for module 'ProcessingScreen'.
18:05:46.7098 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7103 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7107 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7172 [Skin] Processing screen 'AutoVideoModeLabel', position=(0, 0), size=(1280x720) for module 'AutoVideoModeLabel'.
18:05:46.7193 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7236 [VolumeAdjust] Warning: File '/etc/enigma2/volume.xml' does not exist!
18:05:46.7242 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
and there is some iptv lines,
skin errors...
18:05:54.9470 [ActionMap] Map screen 'N/A' context 'HelpActions' -> Unknown action 'select'! (Typo in map?)
18:05:54.9471 [ActionMap] Map screen 'Menu' context 'OkCancelActions' -> Action 'ok'.
18:05:54.9648 [ActionMap] DEBUG: Creating legacy navigation action map.
18:05:54.9649 <bound method ScrollLabel.pageUp of <Components.ScrollLabel.ScrollLabel object at 0xae033dd0>>
18:05:54.9650 <bound method ScrollLabel.pageDown of <Components.ScrollLabel.ScrollLabel object at 0xae033dd0>>
18:05:54.9661 [Skin] Processing screen 'ReceiverInformation' from list 'ReceiverInformation, Information', position=(0, 0), size=(1280x720) for module 'ReceiverInformation'.
18:05:54.9774 [Skin] Error: The 'horizontalAlignment' value '0' is invalid, acceptable options are 'left', 'center', 'right', 'block'!
18:05:55.0012 [Skin] Processing screen 'ScreenSummary' from list 'ReceiverInformationSummary, InformationSummary, ReceiverInformation_summary, Information_summary, ScreenSummary, SimpleSummary', position=(0, 0), size=(396x240) for module 'InformationSummary'.
18:05:55.0035 [Screen] Showing screen '['ReceiverInformationSummary', 'InformationSummary', 'ReceiverInformation_summary', 'Information_summary', 'ScreenSummary', 'SimpleSummary']'.
18:05:55.0049 [Screen] Showing screen '['ReceiverInformation', 'Information']'.
and at the end an autotimer... something cron ?
18:20:42.5098 [AutoTimer] current auto poll 2024-08-08 18:20:42
18:20:42.5101 [AutoTimer] Auto Poll Started
18:20:42.5129 job Components.Task.Job name=AutoTimer #tasks=0 completed with [] in None
18:20:42.5133 [AutoTimer] next auto poll at 2024-08-08 22:20:42
I would definitely :
1- Remove the multiboot
2- Install a stable image, like the OpenATV 7.4 (not 7.3) ONLY
or
2- Install our OpenPLi 8.xStar
and Use the built-in skins... and activating no specific plugin, or if you do, remember that the iptv ones can crash/freeze boxes.
Keep the image as clean as possible, I see you have channel list generated with my friend software EnigmaTV IPTV Generator from m3u8... so I would stick with IPTV channels ONLY on the channel list and no plugin... for watching iptv, these are not reliable and would definitely be the cause of crashes and freezes.
Also for IPTV, I would recommand to use the ServiceApp, with Exteplayer3/FFMpeg2 instead of GStreamer.
TS
-
Display More
Hello TS, thanks again. I went to the cottage today and after turning on the receiver it worked for several hours fine and then suddenly froze completely again (after about three days in total) and at that moment the receiver temperature was about 62 degrees. There was no crash.log file only a debug.log file (I enabled to create it and attaching him), which covered the time when the receiver froze completely and randomly again, but there seems to be no relevant information to my problem).
Ok, I see it was on the DM920UHD, using OpenATV 7.3,
18:05:35.4340 [StartEnigma] Receiver name = Dreambox DM920
18:05:35.4342 [StartEnigma] openATV version = 7.3
On which channel this happened ? DVB-C ? DVB-T ? DVB-S2 ? IPTV ?
I see also that you use Mutliboot,
18:05:35.2917 [Console] Processing command '/bin/mount' with arguments ['/bin/mount', '/dev/mmcblk0p1', '/tmp/MultiBoot_horu98lb'].
18:05:35.3381 [Console] Processing command '/bin/umount' with arguments ['/bin/umount', '/tmp/MultiBoot_horu98lb'].
18:05:35.3427 [Console] Processing command '/bin/mount' with arguments ['/bin/mount', '/dev/mmcblk0p3', '/tmp/MultiBoot_twu9cnnj'].
18:05:35.3497 [Console] Processing command '/bin/umount' with arguments ['/bin/umount', '/tmp/MultiBoot_twu9cnnj'].
18:05:35.3613 [Console] Processing command '/bin/mount' with arguments ['/bin/mount', '/dev/mtdblock2', '/tmp/MultiBoot_42m59ucz'].
18:05:35.4073 [Console] Processing command '/bin/umount' with arguments ['/bin/umount', '/tmp/MultiBoot_42m59ucz'].
- you were using a plugin ?
18:05:43.2224 [Skin] Skin resolution is 1280x720 and color depth is 32 bits.
18:05:43.2226 [Skin] Loading skin file '/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/CoolSkin/EMCMediaCenter_LCD.xml' complete.
- Or a dBackup autorun ?
18:05:44.0598 [dbackup} dreambox-data found on device: /dev/mmcblk0p3
18:05:44.0668 [33m[dBACKUP] PluginDescriptor: [<Plugins.Plugin.PluginDescriptor object at 0xae94a070>, <Plugins.Plugin.PluginDescriptor object at 0xae945f10>][m
18:05:44.0676 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:44.0717 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:44.0753 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:44.0904 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:44.0922 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
or..
18:05:44.9033 ====================================================================================================
18:05:44.9034 [NAVIGATION] Receiver does not start from Deep Standby - skip wake up detection
18:05:44.9035 ====================================================================================================
18:05:44.9083 [FrontPanelLed] /proc/stb/fp/led_brightness does not exist!
18:05:44.9086 [FrontPanelLed] /proc/stb/fp/led_color does not exist!
18:05:44.9090 [ABM-Scheduler][Scheduleautostart] reason(0), session <__main__.Session object at 0xae650310>
18:05:44.9091 [ABM-Scheduler][Scheduleautostart] AutoStart Enabled
18:05:44.9094 [ABM-Scheduler][AutoScheduleTimer] Schedule Disabled at Čt 8. srpna 2024, 18:05:44 CEST
18:05:44.9096 /usr/sbin/flash-fsbl
18:05:44.9096 No FSBL update required!
and there is a lot of errors on the Skin, did you use the image skin or one you installed ?
18:05:44.9900 [Skin] Processing screen 'SecondInfoBar', position=(0, 0), size=(1280x720) for module 'SecondInfoBar'.
18:05:45.1257 [Screen] Warning: Skin is missing element 'epg_description' in <class 'Screens.InfoBarGenerics.SecondInfoBar'>.
18:05:45.1264 [Screen] Warning: Skin is missing element 'FullDescription' in <class 'Screens.InfoBarGenerics.SecondInfoBar'>.
18:05:45.1265 [Screen] Warning: Skin is missing element 'channel' in <class 'Screens.InfoBarGenerics.SecondInfoBar'>.
18:05:45.1450 [ActionMap] Map context 'ChannelSelectEPGActions': Undefined actions 'epg', 'epg_long', 'info', 'info_long'.
18:05:45.1465 [Skin] Processing screen 'ChannelSelection', position=(0, 0), size=(1280x720) for module 'ChannelSelection'.
18:05:45.1763 [ActionMap] Map context 'ChannelSelectEPGActions': Undefined actions 'epg', 'epg_long', 'info', 'info_long'.
18:05:45.1786 [Skin] Processing screen 'SlimChannelSelection' from list 'SlimChannelSelection, SimpleChannelSelection, ChannelSelection', position=(0, 0), size=(1280x720) for module 'PiPZapSelection'.
18:05:45.1970 [ActionMap] Map context 'InfobarChannelSelection': Undefined actions 'ChannelMinusPressedLong', 'ChannelPlusPressedLong', 'openBouquets', 'openSatellites', 'openServiceList', 'switchChannelDownLong', 'switchChannelUpLong', 'volumeDown', 'volumeUp'.
18:05:45.1974 [ActionMap] Map context 'InfoBarMenuActions': Undefined actions 'showHDMIRecord', 'showSystemSetup'.
18:05:45.1982 [ActionMap] Map context 'InfobarEPGActions': Undefined actions 'showEventGuidePlugin', 'showInfobarOrEpgWhenInfobarAlreadyVisible'.
18:05:45.1988 [Skin] Processing screen 'RdsInfoDisplay', position=(0, 610), size=(1280x110) for module 'RdsInfoDisplay'.
18:05:45.2030 [Skin] No skin to read or screen to display.
18:05:45.2035 [Skin] Processing screen '<embedded-in-RdsInfoDisplaySummary>', position=(?, ?), size=(?x?) for module 'RdsInfoDisplaySummary'.
18:05:45.2037 [Screen] Showing screen 'RdsInfoDisplaySummary'.
18:05:45.2053 [Skin] Processing screen 'UnhandledKey', position=(40, 40), size=(71x71) for module 'UnhandledKey'.
18:05:45.2096 [Skin] Processing screen 'Dish', position=(900, 100), size=(132x255) for module 'Dish'.
18:05:45.2156 [ActionMap] Map context 'InfobarSubserviceSelectionActions': Undefined action 'subserviceSelection'.
18:05:45.2165 [Skin] Processing screen 'BufferIndicator', position=(540, 45), size=(320x35) for module 'BufferIndicator'.
18:05:45.2180 [ActionMap] Map context 'InfobarTimeshiftActions': Undefined actions 'restartTimeshift', 'seekBackManual', 'seekFwdManual', 'seekdef:1', 'seekdef:3', 'seekdef:4', 'seekdef:6', 'seekdef:7', 'seekdef:9'.
18:05:45.2195 [ActionMap] Map context 'InfobarSeekActions': Undefined actions 'okButton', 'pauseServiceYellow'.
18:05:45.2198 [ActionMap] Map context 'InfobarSeekActionsPTS': Undefined actions 'seekBackManual', 'seekFwdManual'.
18:05:45.2212 [Skin] Processing screen 'TimeshiftState', position=(190, 238), size=(900x230) for module 'TimeshiftState'.
18:05:45.2267 [Screen] Warning: Skin is missing element 'eventname' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:45.2272 [Screen] Warning: Skin is missing element 'speed' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:45.2273 [Screen] Warning: Skin is missing element 'statusicon' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:45.2274 [Screen] Warning: Skin is missing element 'PTSSeekBack' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:45.2275 [Screen] Warning: Skin is missing element 'PTSSeekPointer' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:46.6965 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.6974 [Skin] Processing screen 'Volume', position=(40, 40), size=(335x71) for module 'Volume'.
18:05:46.7013 [Screen] Warning: Skin is missing element 'VolumeText' in <class 'Screens.Volume.Volume'>.
18:05:46.7033 [Skin] Processing screen 'Mute', position=(40, 40), size=(71x71) for module 'Mute'.
18:05:46.7060 [Volume] Volume set to 100.
18:05:46.7062 [eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
18:05:46.7067 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7074 [Skin] Processing screen 'Processing', position=(340, 250), size=(600x220) for module 'ProcessingScreen'.
18:05:46.7098 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7103 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7107 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7172 [Skin] Processing screen 'AutoVideoModeLabel', position=(0, 0), size=(1280x720) for module 'AutoVideoModeLabel'.
18:05:46.7193 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7236 [VolumeAdjust] Warning: File '/etc/enigma2/volume.xml' does not exist!
18:05:46.7242 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
and there is some iptv lines,
skin errors...
---------------------------------------
yes, there were two lines from my IPTV unofficial sub, meaning I played
18:05:54.9470 [ActionMap] Map screen 'N/A' context 'HelpActions' -> Unknown action 'select'! (Typo in map?)
18:05:54.9471 [ActionMap] Map screen 'Menu' context 'OkCancelActions' -> Action 'ok'.
18:05:54.9648 [ActionMap] DEBUG: Creating legacy navigation action map.
18:05:54.9649 <bound method ScrollLabel.pageUp of <Components.ScrollLabel.ScrollLabel object at 0xae033dd0>>
18:05:54.9650 <bound method ScrollLabel.pageDown of <Components.ScrollLabel.ScrollLabel object at 0xae033dd0>>
18:05:54.9661 [Skin] Processing screen 'ReceiverInformation' from list 'ReceiverInformation, Information', position=(0, 0), size=(1280x720) for module 'ReceiverInformation'.
18:05:54.9774 [Skin] Error: The 'horizontalAlignment' value '0' is invalid, acceptable options are 'left', 'center', 'right', 'block'!
18:05:55.0012 [Skin] Processing screen 'ScreenSummary' from list 'ReceiverInformationSummary, InformationSummary, ReceiverInformation_summary, Information_summary, ScreenSummary, SimpleSummary', position=(0, 0), size=(396x240) for module 'InformationSummary'.
18:05:55.0035 [Screen] Showing screen '['ReceiverInformationSummary', 'InformationSummary', 'ReceiverInformation_summary', 'Information_summary', 'ScreenSummary', 'SimpleSummary']'.
18:05:55.0049 [Screen] Showing screen '['ReceiverInformation', 'Information']'.
and at the end an autotimer... something cron ?
18:20:42.5098 [AutoTimer] current auto poll 2024-08-08 18:20:42
18:20:42.5101 [AutoTimer] Auto Poll Started
18:20:42.5129 job Components.Task.Job name=AutoTimer #tasks=0 completed with [] in None
18:20:42.5133 [AutoTimer] next auto poll at 2024-08-08 22:20:42
I would definitely :
1- Remove the multiboot
2- Install a stable image, like the OpenATV 7.4 (not 7.3) ONLY
or
2- Install our OpenPLi 8.xStar
and Use the built-in skins... and activating no specific plugin, or if you do, remember that the iptv ones can crash/freeze boxes.
Keep the image as clean as possible, I see you have channel list generated with my friend software EnigmaTV IPTV Generator from m3u8... so I would stick with IPTV channels ONLY on the channel list and no plugin... for watching iptv, these are not reliable and would definitely be the cause of crashes and freezes.
Also for IPTV, I would recommand to use the ServiceApp, with Exteplayer3/FFMpeg2 instead of GStreamer.
TS
Display MoreHello TS, thanks again. I went to the cottage today and after turning on the receiver it worked for several hours fine and then suddenly froze completely again (after about three days in total) and at that moment the receiver temperature was about 62 degrees. There was no crash.log file only a debug.log file (I enabled to create it and attaching him), which covered the time when the receiver froze completely and randomly again, but there seems to be no relevant information to my problem).
Ok, I see it was on the DM920UHD, using OpenATV 7.3,
Hello TS, thank you for the asnwer. I tried to answer to your notes in the text of the spoiler below:
18:05:35.4340 [StartEnigma] Receiver name = Dreambox DM920
18:05:35.4342 [StartEnigma] openATV version = 7.3
On which channel this happened ? DVB-C ? DVB-T ? DVB-S2 ? IPTV ?
I see also that you use Mutliboot,
-------------------------------------------------
No, I do not use Multiboot, I had incorrect signal source settings for both tuners (now I've fixed it, I'm at the cottage now, where I have different settings than at home, but now it should be correct)
--------------------------------------------------
18:05:35.2917 [Console] Processing command '/bin/mount' with arguments ['/bin/mount', '/dev/mmcblk0p1', '/tmp/MultiBoot_horu98lb'].
18:05:35.3381 [Console] Processing command '/bin/umount' with arguments ['/bin/umount', '/tmp/MultiBoot_horu98lb'].
18:05:35.3427 [Console] Processing command '/bin/mount' with arguments ['/bin/mount', '/dev/mmcblk0p3', '/tmp/MultiBoot_twu9cnnj'].
18:05:35.3497 [Console] Processing command '/bin/umount' with arguments ['/bin/umount', '/tmp/MultiBoot_twu9cnnj'].
18:05:35.3613 [Console] Processing command '/bin/mount' with arguments ['/bin/mount', '/dev/mtdblock2', '/tmp/MultiBoot_42m59ucz'].
18:05:35.4073 [Console] Processing command '/bin/umount' with arguments ['/bin/umount', '/tmp/MultiBoot_42m59ucz'].
- you were using a plugin ?
---------------------------------------------------
I am not sure about that, I use more an official subscription of O2TV provider IPTV using an unofficial Czech made plugin called Archive CZSK 2.7.4 and less an IPTV unofficial subscription at *.m3u file format.
---------------------------------------------------
18:05:43.2224 [Skin] Skin resolution is 1280x720 and color depth is 32 bits.
18:05:43.2226 [Skin] Loading skin file '/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/CoolSkin/EMCMediaCenter_LCD.xml' complete.
- Or a dBackup autorun ?
-------------------------------------------------
not sure about the question: I use OpenAtv 7.3 image and as far as know well it is a pure image downloaded from https://feeds2/mynonpublic.com/7.3/dm920 and it includes at the settings to choose a skin, I have choosen the MetrixHD.
-------------------------------------------------
18:05:44.0598 [dbackup} dreambox-data found on device: /dev/mmcblk0p3
18:05:44.0668 [33m[dBACKUP] PluginDescriptor: [<Plugins.Plugin.PluginDescriptor object at 0xae94a070>, <Plugins.Plugin.PluginDescriptor object at 0xae945f10>][m
18:05:44.0676 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:44.0717 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:44.0753 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:44.0904 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:44.0922 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
or..
18:05:44.9033 ====================================================================================================
18:05:44.9034 [NAVIGATION] Receiver does not start from Deep Standby - skip wake up detection
18:05:44.9035
??? if I understand it well, it is because the receiver required a hard shutdown and power-on after complete freezing?
====================================================================================================
18:05:44.9083 [FrontPanelLed] /proc/stb/fp/led_brightness does not exist!
18:05:44.9086 [FrontPanelLed] /proc/stb/fp/led_color does not exist!
18:05:44.9090 [ABM-Scheduler][Scheduleautostart] reason(0), session <__main__.Session object at 0xae650310>
18:05:44.9091 [ABM-Scheduler][Scheduleautostart] AutoStart Enabled
18:05:44.9094 [ABM-Scheduler][AutoScheduleTimer] Schedule Disabled at Čt 8. srpna 2024, 18:05:44 CEST
18:05:44.9096 /usr/sbin/flash-fsbl
18:05:44.9096 No FSBL update required!
and there is a lot of errors on the Skin, did you use the image skin or one you installed ?
18:05:44.9900 [Skin] Processing screen 'SecondInfoBar', position=(0, 0), size=(1280x720) for module 'SecondInfoBar'.
18:05:45.1257 [Screen] Warning: Skin is missing element 'epg_description' in <class 'Screens.InfoBarGenerics.SecondInfoBar'>.
18:05:45.1264 [Screen] Warning: Skin is missing element 'FullDescription' in <class 'Screens.InfoBarGenerics.SecondInfoBar'>.
18:05:45.1265 [Screen] Warning: Skin is missing element 'channel' in <class 'Screens.InfoBarGenerics.SecondInfoBar'>.
18:05:45.1450 [ActionMap] Map context 'ChannelSelectEPGActions': Undefined actions 'epg', 'epg_long', 'info', 'info_long'.
18:05:45.1465 [Skin] Processing screen 'ChannelSelection', position=(0, 0), size=(1280x720) for module 'ChannelSelection'.
18:05:45.1763 [ActionMap] Map context 'ChannelSelectEPGActions': Undefined actions 'epg', 'epg_long', 'info', 'info_long'.
18:05:45.1786 [Skin] Processing screen 'SlimChannelSelection' from list 'SlimChannelSelection, SimpleChannelSelection, ChannelSelection', position=(0, 0), size=(1280x720) for module 'PiPZapSelection'.
18:05:45.1970 [ActionMap] Map context 'InfobarChannelSelection': Undefined actions 'ChannelMinusPressedLong', 'ChannelPlusPressedLong', 'openBouquets', 'openSatellites', 'openServiceList', 'switchChannelDownLong', 'switchChannelUpLong', 'volumeDown', 'volumeUp'.
18:05:45.1974 [ActionMap] Map context 'InfoBarMenuActions': Undefined actions 'showHDMIRecord', 'showSystemSetup'.
18:05:45.1982 [ActionMap] Map context 'InfobarEPGActions': Undefined actions 'showEventGuidePlugin', 'showInfobarOrEpgWhenInfobarAlreadyVisible'.
18:05:45.1988 [Skin] Processing screen 'RdsInfoDisplay', position=(0, 610), size=(1280x110) for module 'RdsInfoDisplay'.
18:05:45.2030 [Skin] No skin to read or screen to display.
18:05:45.2035 [Skin] Processing screen '<embedded-in-RdsInfoDisplaySummary>', position=(?, ?), size=(?x?) for module 'RdsInfoDisplaySummary'.
18:05:45.2037 [Screen] Showing screen 'RdsInfoDisplaySummary'.
18:05:45.2053 [Skin] Processing screen 'UnhandledKey', position=(40, 40), size=(71x71) for module 'UnhandledKey'.
18:05:45.2096 [Skin] Processing screen 'Dish', position=(900, 100), size=(132x255) for module 'Dish'.
18:05:45.2156 [ActionMap] Map context 'InfobarSubserviceSelectionActions': Undefined action 'subserviceSelection'.
18:05:45.2165 [Skin] Processing screen 'BufferIndicator', position=(540, 45), size=(320x35) for module 'BufferIndicator'.
18:05:45.2180 [ActionMap] Map context 'InfobarTimeshiftActions': Undefined actions 'restartTimeshift', 'seekBackManual', 'seekFwdManual', 'seekdef:1', 'seekdef:3', 'seekdef:4', 'seekdef:6', 'seekdef:7', 'seekdef:9'.
18:05:45.2195 [ActionMap] Map context 'InfobarSeekActions': Undefined actions 'okButton', 'pauseServiceYellow'.
18:05:45.2198 [ActionMap] Map context 'InfobarSeekActionsPTS': Undefined actions 'seekBackManual', 'seekFwdManual'.
18:05:45.2212 [Skin] Processing screen 'TimeshiftState', position=(190, 238), size=(900x230) for module 'TimeshiftState'.
18:05:45.2267 [Screen] Warning: Skin is missing element 'eventname' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:45.2272 [Screen] Warning: Skin is missing element 'speed' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:45.2273 [Screen] Warning: Skin is missing element 'statusicon' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:45.2274 [Screen] Warning: Skin is missing element 'PTSSeekBack' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:45.2275 [Screen] Warning: Skin is missing element 'PTSSeekPointer' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:46.6965 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.6974 [Skin] Processing screen 'Volume', position=(40, 40), size=(335x71) for module 'Volume'.
18:05:46.7013 [Screen] Warning: Skin is missing element 'VolumeText' in <class 'Screens.Volume.Volume'>.
18:05:46.7033 [Skin] Processing screen 'Mute', position=(40, 40), size=(71x71) for module 'Mute'.
18:05:46.7060 [Volume] Volume set to 100.
18:05:46.7062 [eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
18:05:46.7067 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7074 [Skin] Processing screen 'Processing', position=(340, 250), size=(600x220) for module 'ProcessingScreen'.
18:05:46.7098 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7103 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7107 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7172 [Skin] Processing screen 'AutoVideoModeLabel', position=(0, 0), size=(1280x720) for module 'AutoVideoModeLabel'.
18:05:46.7193 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7236 [VolumeAdjust] Warning: File '/etc/enigma2/volume.xml' does not exist!
18:05:46.7242 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
and there is some iptv lines,
---------------------------------------------
yes, I was playing a link to IPTV channel/file generated by Enigma TV IPTV Generator, how you also mentioned before, that does not need using the plugin called ArchiveCZSK 2.7.4 which I am using only for watching an official O2TV (IPTV) subscription.
---------------------------------------------
skin errors...
18:05:54.9470 [ActionMap] Map screen 'N/A' context 'HelpActions' -> Unknown action 'select'! (Typo in map?)
18:05:54.9471 [ActionMap] Map screen 'Menu' context 'OkCancelActions' -> Action 'ok'.
18:05:54.9648 [ActionMap] DEBUG: Creating legacy navigation action map.
18:05:54.9649 <bound method ScrollLabel.pageUp of <Components.ScrollLabel.ScrollLabel object at 0xae033dd0>>
18:05:54.9650 <bound method ScrollLabel.pageDown of <Components.ScrollLabel.ScrollLabel object at 0xae033dd0>>
18:05:54.9661 [Skin] Processing screen 'ReceiverInformation' from list 'ReceiverInformation, Information', position=(0, 0), size=(1280x720) for module 'ReceiverInformation'.
18:05:54.9774 [Skin] Error: The 'horizontalAlignment' value '0' is invalid, acceptable options are 'left', 'center', 'right', 'block'!
18:05:55.0012 [Skin] Processing screen 'ScreenSummary' from list 'ReceiverInformationSummary, InformationSummary, ReceiverInformation_summary, Information_summary, ScreenSummary, SimpleSummary', position=(0, 0), size=(396x240) for module 'InformationSummary'.
18:05:55.0035 [Screen] Showing screen '['ReceiverInformationSummary', 'InformationSummary', 'ReceiverInformation_summary', 'Information_summary', 'ScreenSummary', 'SimpleSummary']'.
18:05:55.0049 [Screen] Showing screen '['ReceiverInformation', 'Information']'.
and at the end an autotimer... something cron ?
18:20:42.5098 [AutoTimer] current auto poll 2024-08-08 18:20:42
18:20:42.5101 [AutoTimer] Auto Poll Started
18:20:42.5129 job Components.Task.Job name=AutoTimer #tasks=0 completed with [] in None
18:20:42.5133 [AutoTimer] next auto poll at 2024-08-08 22:20:42
------------------------------------------------------------------------------------------
I would definitely :
1- Remove the multiboot
2- Install a stable image, like the OpenATV 7.4 (not 7.3) ONLY
or
2- Install our OpenPLi 8.xStar
and Use the built-in skins... and activating no specific plugin, or if you do, remember that the iptv ones can crash/freeze boxes.
Keep the image as clean as possible, I see you have channel list generated with my friend software EnigmaTV IPTV Generator from m3u8... so I would stick with IPTV channels ONLY on the channel list and no plugin... for watching iptv, these are not reliable and would definitely be the cause of crashes and freezes.
Also for IPTV, I would recommand to use the ServiceApp, with Exteplayer3/FFMpeg2 instead of GStreamer.
TS
------------------------------------------------------------------------------------------------------------
Okay, I'll try to apply what you suggest in the last paragraph later. Thank you much.
-
Display More
Hello TS, thanks again. I went to the cottage today and after turning on the receiver it worked for several hours fine and then suddenly froze completely again (after about three days in total) and at that moment the receiver temperature was about 62 degrees. There was no crash.log file only a debug.log file (I enabled to create it and attaching him), which covered the time when the receiver froze completely and randomly again, but there seems to be no relevant information to my problem).
Ok, I see it was on the DM920UHD, using OpenATV 7.3,
18:05:35.4340 [StartEnigma] Receiver name = Dreambox DM920
18:05:35.4342 [StartEnigma] openATV version = 7.3
On which channel this happened ? DVB-C ? DVB-T ? DVB-S2 ? IPTV ?
I see also that you use Mutliboot,
18:05:35.2917 [Console] Processing command '/bin/mount' with arguments ['/bin/mount', '/dev/mmcblk0p1', '/tmp/MultiBoot_horu98lb'].
18:05:35.3381 [Console] Processing command '/bin/umount' with arguments ['/bin/umount', '/tmp/MultiBoot_horu98lb'].
18:05:35.3427 [Console] Processing command '/bin/mount' with arguments ['/bin/mount', '/dev/mmcblk0p3', '/tmp/MultiBoot_twu9cnnj'].
18:05:35.3497 [Console] Processing command '/bin/umount' with arguments ['/bin/umount', '/tmp/MultiBoot_twu9cnnj'].
18:05:35.3613 [Console] Processing command '/bin/mount' with arguments ['/bin/mount', '/dev/mtdblock2', '/tmp/MultiBoot_42m59ucz'].
18:05:35.4073 [Console] Processing command '/bin/umount' with arguments ['/bin/umount', '/tmp/MultiBoot_42m59ucz'].
- you were using a plugin ?
18:05:43.2224 [Skin] Skin resolution is 1280x720 and color depth is 32 bits.
18:05:43.2226 [Skin] Loading skin file '/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/CoolSkin/EMCMediaCenter_LCD.xml' complete.
- Or a dBackup autorun ?
18:05:44.0598 [dbackup} dreambox-data found on device: /dev/mmcblk0p3
18:05:44.0668 [33m[dBACKUP] PluginDescriptor: [<Plugins.Plugin.PluginDescriptor object at 0xae94a070>, <Plugins.Plugin.PluginDescriptor object at 0xae945f10>][m
18:05:44.0676 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:44.0717 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:44.0753 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:44.0904 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:44.0922 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
or..
18:05:44.9033 ====================================================================================================
18:05:44.9034 [NAVIGATION] Receiver does not start from Deep Standby - skip wake up detection
18:05:44.9035 ====================================================================================================
18:05:44.9083 [FrontPanelLed] /proc/stb/fp/led_brightness does not exist!
18:05:44.9086 [FrontPanelLed] /proc/stb/fp/led_color does not exist!
18:05:44.9090 [ABM-Scheduler][Scheduleautostart] reason(0), session <__main__.Session object at 0xae650310>
18:05:44.9091 [ABM-Scheduler][Scheduleautostart] AutoStart Enabled
18:05:44.9094 [ABM-Scheduler][AutoScheduleTimer] Schedule Disabled at Čt 8. srpna 2024, 18:05:44 CEST
18:05:44.9096 /usr/sbin/flash-fsbl
18:05:44.9096 No FSBL update required!
and there is a lot of errors on the Skin, did you use the image skin or one you installed ?
18:05:44.9900 [Skin] Processing screen 'SecondInfoBar', position=(0, 0), size=(1280x720) for module 'SecondInfoBar'.
18:05:45.1257 [Screen] Warning: Skin is missing element 'epg_description' in <class 'Screens.InfoBarGenerics.SecondInfoBar'>.
18:05:45.1264 [Screen] Warning: Skin is missing element 'FullDescription' in <class 'Screens.InfoBarGenerics.SecondInfoBar'>.
18:05:45.1265 [Screen] Warning: Skin is missing element 'channel' in <class 'Screens.InfoBarGenerics.SecondInfoBar'>.
18:05:45.1450 [ActionMap] Map context 'ChannelSelectEPGActions': Undefined actions 'epg', 'epg_long', 'info', 'info_long'.
18:05:45.1465 [Skin] Processing screen 'ChannelSelection', position=(0, 0), size=(1280x720) for module 'ChannelSelection'.
18:05:45.1763 [ActionMap] Map context 'ChannelSelectEPGActions': Undefined actions 'epg', 'epg_long', 'info', 'info_long'.
18:05:45.1786 [Skin] Processing screen 'SlimChannelSelection' from list 'SlimChannelSelection, SimpleChannelSelection, ChannelSelection', position=(0, 0), size=(1280x720) for module 'PiPZapSelection'.
18:05:45.1970 [ActionMap] Map context 'InfobarChannelSelection': Undefined actions 'ChannelMinusPressedLong', 'ChannelPlusPressedLong', 'openBouquets', 'openSatellites', 'openServiceList', 'switchChannelDownLong', 'switchChannelUpLong', 'volumeDown', 'volumeUp'.
18:05:45.1974 [ActionMap] Map context 'InfoBarMenuActions': Undefined actions 'showHDMIRecord', 'showSystemSetup'.
18:05:45.1982 [ActionMap] Map context 'InfobarEPGActions': Undefined actions 'showEventGuidePlugin', 'showInfobarOrEpgWhenInfobarAlreadyVisible'.
18:05:45.1988 [Skin] Processing screen 'RdsInfoDisplay', position=(0, 610), size=(1280x110) for module 'RdsInfoDisplay'.
18:05:45.2030 [Skin] No skin to read or screen to display.
18:05:45.2035 [Skin] Processing screen '<embedded-in-RdsInfoDisplaySummary>', position=(?, ?), size=(?x?) for module 'RdsInfoDisplaySummary'.
18:05:45.2037 [Screen] Showing screen 'RdsInfoDisplaySummary'.
18:05:45.2053 [Skin] Processing screen 'UnhandledKey', position=(40, 40), size=(71x71) for module 'UnhandledKey'.
18:05:45.2096 [Skin] Processing screen 'Dish', position=(900, 100), size=(132x255) for module 'Dish'.
18:05:45.2156 [ActionMap] Map context 'InfobarSubserviceSelectionActions': Undefined action 'subserviceSelection'.
18:05:45.2165 [Skin] Processing screen 'BufferIndicator', position=(540, 45), size=(320x35) for module 'BufferIndicator'.
18:05:45.2180 [ActionMap] Map context 'InfobarTimeshiftActions': Undefined actions 'restartTimeshift', 'seekBackManual', 'seekFwdManual', 'seekdef:1', 'seekdef:3', 'seekdef:4', 'seekdef:6', 'seekdef:7', 'seekdef:9'.
18:05:45.2195 [ActionMap] Map context 'InfobarSeekActions': Undefined actions 'okButton', 'pauseServiceYellow'.
18:05:45.2198 [ActionMap] Map context 'InfobarSeekActionsPTS': Undefined actions 'seekBackManual', 'seekFwdManual'.
18:05:45.2212 [Skin] Processing screen 'TimeshiftState', position=(190, 238), size=(900x230) for module 'TimeshiftState'.
18:05:45.2267 [Screen] Warning: Skin is missing element 'eventname' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:45.2272 [Screen] Warning: Skin is missing element 'speed' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:45.2273 [Screen] Warning: Skin is missing element 'statusicon' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:45.2274 [Screen] Warning: Skin is missing element 'PTSSeekBack' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:45.2275 [Screen] Warning: Skin is missing element 'PTSSeekPointer' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:46.6965 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.6974 [Skin] Processing screen 'Volume', position=(40, 40), size=(335x71) for module 'Volume'.
18:05:46.7013 [Screen] Warning: Skin is missing element 'VolumeText' in <class 'Screens.Volume.Volume'>.
18:05:46.7033 [Skin] Processing screen 'Mute', position=(40, 40), size=(71x71) for module 'Mute'.
18:05:46.7060 [Volume] Volume set to 100.
18:05:46.7062 [eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
18:05:46.7067 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7074 [Skin] Processing screen 'Processing', position=(340, 250), size=(600x220) for module 'ProcessingScreen'.
18:05:46.7098 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7103 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7107 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7172 [Skin] Processing screen 'AutoVideoModeLabel', position=(0, 0), size=(1280x720) for module 'AutoVideoModeLabel'.
18:05:46.7193 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7236 [VolumeAdjust] Warning: File '/etc/enigma2/volume.xml' does not exist!
18:05:46.7242 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
and there is some iptv lines,
skin errors...
18:05:54.9470 [ActionMap] Map screen 'N/A' context 'HelpActions' -> Unknown action 'select'! (Typo in map?)
18:05:54.9471 [ActionMap] Map screen 'Menu' context 'OkCancelActions' -> Action 'ok'.
18:05:54.9648 [ActionMap] DEBUG: Creating legacy navigation action map.
18:05:54.9649 <bound method ScrollLabel.pageUp of <Components.ScrollLabel.ScrollLabel object at 0xae033dd0>>
18:05:54.9650 <bound method ScrollLabel.pageDown of <Components.ScrollLabel.ScrollLabel object at 0xae033dd0>>
18:05:54.9661 [Skin] Processing screen 'ReceiverInformation' from list 'ReceiverInformation, Information', position=(0, 0), size=(1280x720) for module 'ReceiverInformation'.
18:05:54.9774 [Skin] Error: The 'horizontalAlignment' value '0' is invalid, acceptable options are 'left', 'center', 'right', 'block'!
18:05:55.0012 [Skin] Processing screen 'ScreenSummary' from list 'ReceiverInformationSummary, InformationSummary, ReceiverInformation_summary, Information_summary, ScreenSummary, SimpleSummary', position=(0, 0), size=(396x240) for module 'InformationSummary'.
18:05:55.0035 [Screen] Showing screen '['ReceiverInformationSummary', 'InformationSummary', 'ReceiverInformation_summary', 'Information_summary', 'ScreenSummary', 'SimpleSummary']'.
18:05:55.0049 [Screen] Showing screen '['ReceiverInformation', 'Information']'.
and at the end an autotimer... something cron ?
18:20:42.5098 [AutoTimer] current auto poll 2024-08-08 18:20:42
18:20:42.5101 [AutoTimer] Auto Poll Started
18:20:42.5129 job Components.Task.Job name=AutoTimer #tasks=0 completed with [] in None
18:20:42.5133 [AutoTimer] next auto poll at 2024-08-08 22:20:42
I would definitely :
1- Remove the multiboot
2- Install a stable image, like the OpenATV 7.4 (not 7.3) ONLY
or
2- Install our OpenPLi 8.xStar
and Use the built-in skins... and activating no specific plugin, or if you do, remember that the iptv ones can crash/freeze boxes.
Keep the image as clean as possible, I see you have channel list generated with my friend software EnigmaTV IPTV Generator from m3u8... so I would stick with IPTV channels ONLY on the channel list and no plugin... for watching iptv, these are not reliable and would definitely be the cause of crashes and freezes.
Also for IPTV, I would recommand to use the ServiceApp, with Exteplayer3/FFMpeg2 instead of GStreamer.
TS
-
Display MoreDisplay More
Hello TS, thanks again. I went to the cottage today and after turning on the receiver it worked for several hours fine and then suddenly froze completely again (after about three days in total) and at that moment the receiver temperature was about 62 degrees. There was no crash.log file only a debug.log file (I enabled to create it and attaching him), which covered the time when the receiver froze completely and randomly again, but there seems to be no relevant information to my problem).
Ok, I see it was on the DM920UHD, using OpenATV 7.3,
18:05:35.4340 [StartEnigma] Receiver name = Dreambox DM920
18:05:35.4342 [StartEnigma] openATV version = 7.3
On which channel this happened ? DVB-C ? DVB-T ? DVB-S2 ? IPTV ?
I see also that you use Mutliboot,
18:05:35.2917 [Console] Processing command '/bin/mount' with arguments ['/bin/mount', '/dev/mmcblk0p1', '/tmp/MultiBoot_horu98lb'].
18:05:35.3381 [Console] Processing command '/bin/umount' with arguments ['/bin/umount', '/tmp/MultiBoot_horu98lb'].
18:05:35.3427 [Console] Processing command '/bin/mount' with arguments ['/bin/mount', '/dev/mmcblk0p3', '/tmp/MultiBoot_twu9cnnj'].
18:05:35.3497 [Console] Processing command '/bin/umount' with arguments ['/bin/umount', '/tmp/MultiBoot_twu9cnnj'].
18:05:35.3613 [Console] Processing command '/bin/mount' with arguments ['/bin/mount', '/dev/mtdblock2', '/tmp/MultiBoot_42m59ucz'].
18:05:35.4073 [Console] Processing command '/bin/umount' with arguments ['/bin/umount', '/tmp/MultiBoot_42m59ucz'].
- you were using a plugin ?
18:05:43.2224 [Skin] Skin resolution is 1280x720 and color depth is 32 bits.
18:05:43.2226 [Skin] Loading skin file '/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/CoolSkin/EMCMediaCenter_LCD.xml' complete.
- Or a dBackup autorun ?
18:05:44.0598 [dbackup} dreambox-data found on device: /dev/mmcblk0p3
18:05:44.0668 [33m[dBACKUP] PluginDescriptor: [<Plugins.Plugin.PluginDescriptor object at 0xae94a070>, <Plugins.Plugin.PluginDescriptor object at 0xae945f10>][m
18:05:44.0676 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:44.0717 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:44.0753 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:44.0904 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:44.0922 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
or..
18:05:44.9033 ====================================================================================================
18:05:44.9034 [NAVIGATION] Receiver does not start from Deep Standby - skip wake up detection
18:05:44.9035 ====================================================================================================
18:05:44.9083 [FrontPanelLed] /proc/stb/fp/led_brightness does not exist!
18:05:44.9086 [FrontPanelLed] /proc/stb/fp/led_color does not exist!
18:05:44.9090 [ABM-Scheduler][Scheduleautostart] reason(0), session <__main__.Session object at 0xae650310>
18:05:44.9091 [ABM-Scheduler][Scheduleautostart] AutoStart Enabled
18:05:44.9094 [ABM-Scheduler][AutoScheduleTimer] Schedule Disabled at Čt 8. srpna 2024, 18:05:44 CEST
18:05:44.9096 /usr/sbin/flash-fsbl
18:05:44.9096 No FSBL update required!
and there is a lot of errors on the Skin, did you use the image skin or one you installed ?
18:05:44.9900 [Skin] Processing screen 'SecondInfoBar', position=(0, 0), size=(1280x720) for module 'SecondInfoBar'.
18:05:45.1257 [Screen] Warning: Skin is missing element 'epg_description' in <class 'Screens.InfoBarGenerics.SecondInfoBar'>.
18:05:45.1264 [Screen] Warning: Skin is missing element 'FullDescription' in <class 'Screens.InfoBarGenerics.SecondInfoBar'>.
18:05:45.1265 [Screen] Warning: Skin is missing element 'channel' in <class 'Screens.InfoBarGenerics.SecondInfoBar'>.
18:05:45.1450 [ActionMap] Map context 'ChannelSelectEPGActions': Undefined actions 'epg', 'epg_long', 'info', 'info_long'.
18:05:45.1465 [Skin] Processing screen 'ChannelSelection', position=(0, 0), size=(1280x720) for module 'ChannelSelection'.
18:05:45.1763 [ActionMap] Map context 'ChannelSelectEPGActions': Undefined actions 'epg', 'epg_long', 'info', 'info_long'.
18:05:45.1786 [Skin] Processing screen 'SlimChannelSelection' from list 'SlimChannelSelection, SimpleChannelSelection, ChannelSelection', position=(0, 0), size=(1280x720) for module 'PiPZapSelection'.
18:05:45.1970 [ActionMap] Map context 'InfobarChannelSelection': Undefined actions 'ChannelMinusPressedLong', 'ChannelPlusPressedLong', 'openBouquets', 'openSatellites', 'openServiceList', 'switchChannelDownLong', 'switchChannelUpLong', 'volumeDown', 'volumeUp'.
18:05:45.1974 [ActionMap] Map context 'InfoBarMenuActions': Undefined actions 'showHDMIRecord', 'showSystemSetup'.
18:05:45.1982 [ActionMap] Map context 'InfobarEPGActions': Undefined actions 'showEventGuidePlugin', 'showInfobarOrEpgWhenInfobarAlreadyVisible'.
18:05:45.1988 [Skin] Processing screen 'RdsInfoDisplay', position=(0, 610), size=(1280x110) for module 'RdsInfoDisplay'.
18:05:45.2030 [Skin] No skin to read or screen to display.
18:05:45.2035 [Skin] Processing screen '<embedded-in-RdsInfoDisplaySummary>', position=(?, ?), size=(?x?) for module 'RdsInfoDisplaySummary'.
18:05:45.2037 [Screen] Showing screen 'RdsInfoDisplaySummary'.
18:05:45.2053 [Skin] Processing screen 'UnhandledKey', position=(40, 40), size=(71x71) for module 'UnhandledKey'.
18:05:45.2096 [Skin] Processing screen 'Dish', position=(900, 100), size=(132x255) for module 'Dish'.
18:05:45.2156 [ActionMap] Map context 'InfobarSubserviceSelectionActions': Undefined action 'subserviceSelection'.
18:05:45.2165 [Skin] Processing screen 'BufferIndicator', position=(540, 45), size=(320x35) for module 'BufferIndicator'.
18:05:45.2180 [ActionMap] Map context 'InfobarTimeshiftActions': Undefined actions 'restartTimeshift', 'seekBackManual', 'seekFwdManual', 'seekdef:1', 'seekdef:3', 'seekdef:4', 'seekdef:6', 'seekdef:7', 'seekdef:9'.
18:05:45.2195 [ActionMap] Map context 'InfobarSeekActions': Undefined actions 'okButton', 'pauseServiceYellow'.
18:05:45.2198 [ActionMap] Map context 'InfobarSeekActionsPTS': Undefined actions 'seekBackManual', 'seekFwdManual'.
18:05:45.2212 [Skin] Processing screen 'TimeshiftState', position=(190, 238), size=(900x230) for module 'TimeshiftState'.
18:05:45.2267 [Screen] Warning: Skin is missing element 'eventname' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:45.2272 [Screen] Warning: Skin is missing element 'speed' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:45.2273 [Screen] Warning: Skin is missing element 'statusicon' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:45.2274 [Screen] Warning: Skin is missing element 'PTSSeekBack' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:45.2275 [Screen] Warning: Skin is missing element 'PTSSeekPointer' in <class 'Screens.PVRState.TimeshiftState'>.
18:05:46.6965 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.6974 [Skin] Processing screen 'Volume', position=(40, 40), size=(335x71) for module 'Volume'.
18:05:46.7013 [Screen] Warning: Skin is missing element 'VolumeText' in <class 'Screens.Volume.Volume'>.
18:05:46.7033 [Skin] Processing screen 'Mute', position=(40, 40), size=(71x71) for module 'Mute'.
18:05:46.7060 [Volume] Volume set to 100.
18:05:46.7062 [eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
18:05:46.7067 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7074 [Skin] Processing screen 'Processing', position=(340, 250), size=(600x220) for module 'ProcessingScreen'.
18:05:46.7098 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7103 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7107 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7172 [Skin] Processing screen 'AutoVideoModeLabel', position=(0, 0), size=(1280x720) for module 'AutoVideoModeLabel'.
18:05:46.7193 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
18:05:46.7236 [VolumeAdjust] Warning: File '/etc/enigma2/volume.xml' does not exist!
18:05:46.7242 [Profile] Error 16: Unable to write a line to file '/proc/progress'! (Device or resource busy)
and there is some iptv lines,
skin errors...
18:05:54.9470 [ActionMap] Map screen 'N/A' context 'HelpActions' -> Unknown action 'select'! (Typo in map?)
18:05:54.9471 [ActionMap] Map screen 'Menu' context 'OkCancelActions' -> Action 'ok'.
18:05:54.9648 [ActionMap] DEBUG: Creating legacy navigation action map.
18:05:54.9649 <bound method ScrollLabel.pageUp of <Components.ScrollLabel.ScrollLabel object at 0xae033dd0>>
18:05:54.9650 <bound method ScrollLabel.pageDown of <Components.ScrollLabel.ScrollLabel object at 0xae033dd0>>
18:05:54.9661 [Skin] Processing screen 'ReceiverInformation' from list 'ReceiverInformation, Information', position=(0, 0), size=(1280x720) for module 'ReceiverInformation'.
18:05:54.9774 [Skin] Error: The 'horizontalAlignment' value '0' is invalid, acceptable options are 'left', 'center', 'right', 'block'!
18:05:55.0012 [Skin] Processing screen 'ScreenSummary' from list 'ReceiverInformationSummary, InformationSummary, ReceiverInformation_summary, Information_summary, ScreenSummary, SimpleSummary', position=(0, 0), size=(396x240) for module 'InformationSummary'.
18:05:55.0035 [Screen] Showing screen '['ReceiverInformationSummary', 'InformationSummary', 'ReceiverInformation_summary', 'Information_summary', 'ScreenSummary', 'SimpleSummary']'.
18:05:55.0049 [Screen] Showing screen '['ReceiverInformation', 'Information']'.
and at the end an autotimer... something cron ?
18:20:42.5098 [AutoTimer] current auto poll 2024-08-08 18:20:42
18:20:42.5101 [AutoTimer] Auto Poll Started
18:20:42.5129 job Components.Task.Job name=AutoTimer #tasks=0 completed with [] in None
18:20:42.5133 [AutoTimer] next auto poll at 2024-08-08 22:20:42
I would definitely :
1- Remove the multiboot
2- Install a stable image, like the OpenATV 7.4 (not 7.3) ONLY
or
2- Install our OpenPLi 8.xStar
and Use the built-in skins... and activating no specific plugin, or if you do, remember that the iptv ones can crash/freeze boxes.
Keep the image as clean as possible, I see you have channel list generated with my friend software EnigmaTV IPTV Generator from m3u8... so I would stick with IPTV channels ONLY on the channel list and no plugin... for watching iptv, these are not reliable and would definitely be the cause of crashes and freezes.
Also for IPTV, I would recommand to use the ServiceApp, with Exteplayer3/FFMpeg2 instead of GStreamer.
TS
Hello TS, I have installed the OpenAtv7.4, I will see when or if it freezes...
-
Hello TS,
after installing OpenAtv7.4 without additional plugins my device works without the freeze in the meantime, but it has passed a very short time so far. But I have found out that there were really a faulty series with defective motherboards in the 920 for sure on the Czech satellite forum Parabola, see links here:
https://www.parabola.cz/forum/topic-100085/
https://www.parabola.cz/forum/topic-100085/2/
that can be translated with Google Chrome for example.
So I need to wait what happens next but if the device freezes again so I have bought it most likely with a faulthy motherboard. Unfortunately a friend of yours Johnny_B has been unavailable already for a few months (from April of this year) to comment on this matter.
-
Display More
Hello TS,
after installing OpenAtv7.4 without additional plugins my device works without the freeze in the meantime, but it has passed a very short time so far. But I have found out that there were really a faulty series with defective motherboards in the 920 for sure on the Czech satellite forum Parabola, see links here:
https://www.parabola.cz/forum/topic-100085/
https://www.parabola.cz/forum/topic-100085/2/
that can be translated with Google Chrome for example.
So I need to wait what happens next but if the device freezes again so I have bought it most likely with a faulthy motherboard. Unfortunately a friend of yours Johnny_B has been unavailable already for a few months (from April of this year) to comment on this matter.
We will see, but on the topic they talk as well of the DM900UHD which is the problem.
TS
-
Display MoreDisplay More
Hello TS,
after installing OpenAtv7.4 without additional plugins my device works without the freeze in the meantime, but it has passed a very short time so far. But I have found out that there were really a faulty series with defective motherboards in the 920 for sure on the Czech satellite forum Parabola, see links here:
https://www.parabola.cz/forum/topic-100085/
https://www.parabola.cz/forum/topic-100085/2/
that can be translated with Google Chrome for example.
So I need to wait what happens next but if the device freezes again so I have bought it most likely with a faulthy motherboard. Unfortunately a friend of yours Johnny_B has been unavailable already for a few months (from April of this year) to comment on this matter.
We will see, but on the topic they talk as well of the DM900UHD which is the problem.
TS
Hello TS,
the receiver keeps working without freezing for the time being, I only watch IPTV from the list of channels uploaded by the DreamSet 2.4.13 app and I have also tried the Czech plugin ArchiveCZSK 2.4.7 for watching IPTV from the Czech provider O2TV.I haven't installed any other plugins or softcams yet. What do you think about it so far, what does it imply? Does it look like it might not be a defective motherboard? Do you know what revisions (series) of the motherboard were implemented in the DM920? I'm asking because I've read that the defective series with faulty mainboards was supposedly Rev. 0.3, but my board is Rev. 3 according to the information from the OpenAtv7.4 image. I have no idea if it's the same motherboard (revision) or not or if it's just a "display" of the same data by firmware "in a different format", that's without the zero at the beginning?! Thank you and regards...
-
Display MoreDisplay MoreDisplay More
Hello TS,
after installing OpenAtv7.4 without additional plugins my device works without the freeze in the meantime, but it has passed a very short time so far. But I have found out that there were really a faulty series with defective motherboards in the 920 for sure on the Czech satellite forum Parabola, see links here:
https://www.parabola.cz/forum/topic-100085/
https://www.parabola.cz/forum/topic-100085/2/
that can be translated with Google Chrome for example.
So I need to wait what happens next but if the device freezes again so I have bought it most likely with a faulthy motherboard. Unfortunately a friend of yours Johnny_B has been unavailable already for a few months (from April of this year) to comment on this matter.
We will see, but on the topic they talk as well of the DM900UHD which is the problem.
TS
Hello TS,
the receiver keeps working without freezing for the time being, I only watch IPTV from the list of channels uploaded by the DreamSet 2.4.13 app and I have also tried the Czech plugin ArchiveCZSK 2.4.7 for watching IPTV from the Czech provider O2TV.I haven't installed any other plugins or softcams yet. What do you think about it so far, what does it imply? Does it look like it might not be a defective motherboard? Do you know what revisions (series) of the motherboard were implemented in the DM920? I'm asking because I've read that the defective series with faulty mainboards was supposedly Rev. 0.3, but my board is Rev. 3 according to the information from the OpenAtv7.4 image. I have no idea if it's the same motherboard (revision) or not or if it's just a "display" of the same data by firmware "in a different format", that's without the zero at the beginning?! Thank you and regards...
1. I never seen a DM920UHD defective, only DM900UHD.
2. You have no issues with new updated software/image/firmware, so I believe it was more due to a corruption of the software you were using.
You can always buy from the Dubai seller a new motherboard (it costs around 130-150 USD I think, with postage), to keep as spare if you like your box, but I think that with the new firmware you sorted out your problem. Remember also that sometimes such problems (Freezes of the box) could come from buggy drivers... on older images, reason of the updates and new releases of drivers over time from the manufacturer.
TS
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
