How to use GTMedia GTcombo - Channel Lists for MARS Firmware

Unzip and put the list on USB drive root. Connect to GTcombo. Open menu-Channel-user channel list-load-USB-storage, and click on the file. This is my personal list so it will save you some time to scan and you can them modify as per you local settings. I have looked everywhere for a channel list editor and found nothing usefull. Combo needs still to improve because scanning of sattelite channels is as you can see from the list not the best, names of some channels are marked as only program and number and terrestrial scanning is weak. I also had a problem were I could not sort channels but after full reset it worked. Work in progress...

You can also save you channel list to USB by going to Menu-Channel-User Channel list -save-USB-storage

Im not sure, tested with 128 gb TF card, works OK, will test tommorow with larger capacity

Tried 1tb TF card, could not get it to read the card, I dont have any other TF cards to test, but I think 128 gb is good enough for the purpose and it is positively tested on GTcombo

Hi to all, it´s not possible to connect the box GT MEDIA GT COMBO 4K to the site mymars like V8 UHD and other boxes with mars firmware? Thanks.

Hi to all, you know if it´s possible to use mymars in the GT COMBO 4K with MARS 3.3.3 Firmware? I tried to do it but I was not successful. Thanks a lot.

Quote from tomixe

Hi to all, you know if it´s possible to use mymars in the GT COMBO 4K with MARS 3.3.3 Firmware? I tried to do it but I was not successful. Thanks a lot.

I have the same problem. I can not save to cloud or download from cloud (mymars.space) because save to cloud first time connecting write wrong box id. When I try scanning the QRcode redirect login to metamango not to mymarce.space. I use the latest firmware on GTMedia combo

Hi I can’t seem to add this to

My box any idea

V8 uhd

I’ve loaded it on the usb and shows but I’m not sure where I’m

Meant to load it from ?

The motor channel list I’m trying to add

Flashed with Mars

Thanks in advance

Matt

I am using the Mars software from February 2025 for my Gtmedia V9 Prime. For 3 days, it all worked fine. suddenly, the expiry date switches back and forth between March 2026 and 00,2008 in the CS Protocol. I deleted the Line, swithched the receiver off. I turned it back on and imported my CCcam file from the USB onto the receiver but the problem remains the same...

Does anyone knows to show me how do I make channel list with chanSort

Is it posible to create one buqet with channels from diferent satelites?

Regards

Quote from buc61b

Does anyone knows to show me how do I make channel list with chanSort

Is it posible to create one buqet with channels from diferent satelites?

Regards

ChanSort is to old use

https://www.linuxsat-support.com/thread/161449-the-channelizer-is-a-windows-channel-editor/ 

new windows tool