configure CCCAM account on DM 520 - OpenPLI

hi!

I used to have a dvb box with a cccam account that worked fine.

The former box was one of those chinese made box with not much functions but worked fine.

I got a DM520 and moved my account there but it does not work:

2024/09/04 08:16:45 1FB2EFF7 h (reader) Reader-002 [cccam] creating thread for device xxxxx
2024/09/04 08:16:45 6B6D781C p (reader) xxxx: resolved ip=xxxxxx
2024/09/04 08:16:45 6B6D781C p (reader) Reader-002 [cccam] connecting to xxxxx:3000
2024/09/04 08:16:46 2FC10F34 c (dvbapi) Demuxer 0 restarting decoding requests after 502 ms with 10 enabled and 0 disabled ecmpids!
2024/09/04 08:16:46 2FC10F34 c (dvbapi) Demuxer 0 trying to descramble PID 6 CAID 0100 PROVID 0000A0 ECMPID 03C4 ANY CHID PMTPID 0384 VPID 038E
2024/09/04 08:16:46 2FC10F34 c (ecm) dvbapiau (0100@0000A0/5C00/1585/6A:38E92346E7E67790ED8ACD76D26CC9B0): rejected group (0 ms) (no matching reader)
2024/09/04 08:16:46 2FC10F34 c (ecm) dvbapiau (0100@0000A0/5C00/1585/6A:38E92346E7E67790ED8ACD76D26CC9B0): rejected group (1 ms) (no matching reader)
2024/09/04 08:16:46 2FC10F34 c (dvbapi) Demuxer 0 impossible to descramble PID 7 CAID 0100 PROVID 0000A0 ECMPID 03C3 PMTPID 0384 (NO MATCHING READER)
2024/09/04 08:16:46 2FC10F34 c (dvbapi) Demuxer 0 impossible to descramble PID 8 CAID 0100 PROVID 0001EB ECMPID 03C7 PMTPID 0384 (NO MATCHING READER)

my reader config is:

[reader]
label                         = Reader-002
description                   = mydesc
protocol                      = cccam
device                        = ip_address,port
key                           = 0102030405060708091011121314
user                          = my_user
password                      = my_pass
inactivitytimeout             = 30
group                         = 1
cccversion                    = 2.3.1

- user and password are correct

- so are ip and port

is there something missing in my config?

the box config looks like the attached image.

Edit: I did comment the Key paramter out to, still the same issue

I do not know much about how this box works since it is not a Linux based one.

the box is a Hellobox (chinese made) and as you can see the client is connected.

Could it be the CW Check thing? What would be the equivalent in Dreambox?

Quote from master G

Another way to test the line is with a simple c line (C: hostname port user pass). Add this to the CCcam.cfg config file.

Most new versions of oscam have this feature, if yours doesn`t then update oscam or use CCcam on its own.

Sorry for late response but I cannot figure out, where is that CCcam.cfg is located.
Should I create that file?

By the way, my configs are following:

oscam.conf :

[global]
disablelog				= 1
disableuserfile				= 1
usrfileflag				= 0
maxlogsize				= 10
preferlocalcards			= 1
saveinithistory 			= 1
lb_mode					= 0
unlock_parental				= 1
disablecrccws_only_for			= 098C:000000;09C4:000000


[cs378x]
port                          = 12005

[webif]
httpport				= 8081
httpallowed				= 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1

[dvbapi]
enabled					= 1
pmt_mode				= 6
au					= 1
user					= dvbapiau
boxtype					= dreambox

oscam.reader:

[reader]
label                         = Reader-0
description                   = XXXX
protocol                      = cccam
device                        = XXXX.XX,YYYYY
user                          = YYYYY
password                      = XXXXX
inactivitytimeout             = 30
group                         = 1
cccversion                    = 2.3.0
cccmaxhops                    = 2
ccckeepalive                  = 1
audisabled                    = 1

oscam.user:

[account]
user                          = dvbapiau
au                            = 1
group                         = 1

Quote from toysoft

is the group set properly for the user ?

TS

(0100@0000A0/5C00/1585/6A:38E92346E7E67790ED8ACD76D26CC9B0): rejected group (1 ms) (no matching reader)

group = 1

Display More

Hi!
The reader I have configured is set to group "1" and so is the dvbapiau
Is there anything I missed?

it looks like I do not have this option on my Oscam, nevertheless, I managed to get my reader connected by creating a C line and converting it into Oscam config (thanks to an old post from you)

Now I get I totally different kind of error:

2024/09/06 09:38:14 7153AE33 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 1821 PROVID 0001EB ECMPID 03C6 ANY CHID PMTPID 0384 VPID 038E
2024/09/06 09:38:18 7153AE33 (ecm) dvbapiau (1821@0001EB/0000/1585/6A:A517BE75B71BC4A1B0832BC20CCB544E): rejected (3887 ms) by XXXXXXX
2824/89/86 09:38:18 7153AE33 c (ecm) dvbapiau (1821@0001EB/0000/1585/6A:A517BE75B71BC4A1B0832BC20CCB544E): rejected (1 ms) by XXXXXX
2024/09/06 09:38:18 7153AE33 c (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 7 disabl ed ecmpids!

On the DM I had 3 years ago, I remember that the ecm was something like this:

2021/03/29 14:49:46 6AF559B0 c (ecm) 001 (0100@0001EB/5C00/145D/64:B93638DF05EFBF0A30C9F6C6C7683A60): rejected (1 ms) by lower_card (Invalid ecm type for card)

Why did the 0100@0001EB change to 1821@0001EB? Can I force it to 0100 ?

Could it be that my Oscam version does not support Nagra?

what bogs me now is the fact that the "dvbapiau" user is rejected:

2024/09/08 17:01:08 3EEE3BE8 c (ecm) dvbapiau (1821@0001EB/0000/1585/6A:A0A8706EFD273AFFFBE5EF444D9C92C3): rejected (1 ms) by CCCAM-1
2024/09/08 17:01:08 3EEE3BE8 c (ecm) dvbapiau (1821@0001EB/0000/1585/6A:A0A8706EFD273AFFFBE5EF444D9C92C3): rejected (0 ms) by CCCAM-1

My "reader" (I renamed it) is clearly shown as connected:

pasted-from-clipboard.jpg

Do any of you have any idea why?

Quote from master G

Another way to test the line is with a simple c line (C: hostname port user pass). Add this to the CCcam.cfg config file.

Most new versions of oscam have this feature, if yours doesn`t then update oscam or use CCcam on its own.

hi!

I switched to CCcam plugin on its own as you said.

put the CLINE in CCcam.cfg and get the following error:

17:40:15.933 CCcam: remote ecm -> my_server:myport 0x1821(0x000)
17:40:16.168 CCcam: remote ecm <- my_server:myport error
17:40:16.169 CCcam: remote ecm -> my_server:myport 0x1821(0x000)
17:40:16.433 CCcam: remote ecm <- my_server:myport error

1821 is my CAID and the remote server returns "error", since the user and password are definitely correct, what could be wrong?