Hello everyone , i am currently having a problem with hispassat 30w , the problem i have is that portugueses channels transponders don't have signal , but the transponders 1077 H Sr 3000 Fec 5/6 and 10939 H Sr 14167 Fec 3/4 , 11222 H Sr 3000 Fec 3/4 , 11644 V Sr 4000 Fec 2/3 and 11675 H Sr 1575 Fec 3/4 have 92 signal quality and 95agc , i have a vu solo 2 with blackhole 3.0.9 and I tried changing the lnb , the mount the dish and its the same , the configuration mode is simple mode single satellite 30w hispassat 5/6 / spainsat 30w , send diseqc off , i have a single lnb , the only channels i get are cubavision internacional , feeds 2 , feeds 3 god channel , parlamento, rtp3i ,sbn international , telesur hd , tsa record news , tsa record tv hd ,tvi international and v+ int .Can someone help me make it work? Cheers !
Issues with hispassat 30w
- Raul Selegean
- Thread is marked as Resolved.
-
I receive the transponders you reported with a signal between 11/14 dB.
Have you set the skew correctly for your reception area?
Try to check the values to set on http://www.dishpointer.com
-
Some questions
Is the parabola fixed or motorized?
Have you tried not using DISEqC and directly connecting that satellite position without it?
Have you tried replacing the LNB?
-
You probably have a problem with 22kHz or a problem with the LNB (high band)
-
You probably have a problem with 22kHz or a problem with the LNB (high band)
And how can i solve that problem?
-
First of all, you have to find out if a 22kHz signal is coming out of the receiver, and if not, which component in the receiver generates 22kHz and try to replace it, or try another receiver.
-
-
not tool, osciloskop
-
não ferramenta, osciloscópio
If the box has an external power supply, replace it.
-
Its a terrible day where I am so just drifting. I have a solo2 with an openatv 6.4 image and scanning 30w as I type BUT can you say that you were receiving all those channels in the past and you are not just starting. When you replaced the lnb did you put it back exactly in the same slot and same distance from dish face. What is the make and version of the lnb, you may have got the wrong one/type. Any trees in the way, where are you and size of dish. Dish may have moved.
Are you using an official card by any chance?
-
Aha now you have to say size of dish and location, roughly, I'm west of ireland with a triax 110cm dish and use ultra black ultra. any trees in the way? And you don't say make and version of lnb, if you dont answer the questions its impossible to give you proper help, you dont even say why you changed the lnb.
Have you got the right elevation on the dish and skew for 30w will be different from thor and the elevation. The fact you get a few is just luck
There are over 500 channels on 30w and most of them are encrypted, the FTA are a waste of time.
-
So you can check the solo2 on the thor sat and if that works then your dish for 30w is wonky, its as simple as that. I get 100% signal on 30w.
Chat about everything else!
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
