DreamTwo : OpenPLi 9.xStar 20250115 GSt 1.20.5 (Original)

its only 90mb

I think it the lightest image ever

The installation runs, the first screen for selecting the language starts and then it END. Nothing can be selected, it does not respond to the remote control. To be sure, I tried reinstalling twice.

I tried that of course. I can press any key I want, it doesn't do anything. The remote is Bluetooth.

I thought I would install your image on one of my SD card slots via Open ATV, which helped me do that.

I am planning to replace the copy they offer with your copy, but it should be in zip format

can I get your image in zip format

(I know you don't support multiboot)

Thanks for the hint

Found the topic, they got a script to fix the image

its too difficult for me to handle it and understand and apply

Quote from toysoft

You can run that script on any DMM box on the HDD, and it will unpack the original file and generate the zip,

TS

I tried with AJpanel run script but did not see the image to unpack and generate zip

Your image comes tar.gz

script in tar.xz

Good morning everyone.

Now everything is fine and after selecting the language, the installation wizard continues.

I flashed the image on my dreambox2 ....the image is great ...fast ...and light ...but the timeshift doesn't work although I choose the play button from hotkey ...may you find a solution next time to make timeshift work ؟

Quote from toysoft

Quote from Arqan

I flashed the image on my dreambox2 ....the image is great ...fast ...and light ...but the timeshift doesn't work although I choose the play button from hotkey ...may you find a solution next time to make timeshift work ؟

Thank you for advising and your feedback, do you have an /hdd ? As the timeshift folder is there.

TS

Sure I have hard disk....I made the required settings for timeshift but nothing response ...have you tested that ? if you tried tell us ,respect .

Quote from toysoft

This is the script,

Bash

#!/bin/bash
# Version 1.2
# create by OE-A


if [ $# -ne 1 ]; then
echo "Usage: $0 <input_tar.xz>"
exit 1
fi


input_file="$1"


if [ ! -f "$input_file" ]; then
echo "Input file does not exist: $input_file"
exit 1
fi


# Determine the folder name(s) based on the input file name
if [[ "$input_file" == *"-dreambox-"* ]]; then
folder_names=("dreamone" "dreamtwo")
aio="-AIO"
elif [[ "$input_file" == *"-dreamone-"* ]]; then
folder_names=("dreamone")
aio=""
elif [[ "$input_file" == *"-dreamtwo-"* ]]; then
folder_names=("dreamtwo")
aio=""
else
echo "Input file name should contain '-dreambox-,' '-dreamone-,' or '-dreamtwo-'"
exit 1
fi


# Determine the Namen and the Version based on the input file name
if [[ "$input_file" == *"dream-elite"* ]]; then
name="Dream Elite"
version="2.6"
elif [[ "$input_file" == *"dreambox-image"* ]]; then
name="Dreambox"
version="2.6"
elif [[ "$input_file" == *"gemini4.2-unstable"* ]]; then
name="Gemini"
version="4.2"
elif [[ "$input_file" == *"Merlin_OE-2.6"* ]]; then
name="Merlin"
version="2.6"
elif [[ "$input_file" == *"newnigma2-deb"* ]]; then
name="Newnigma2"
version="2.6"
elif [[ "$input_file" == *"openpli-enigma2"* ]]; then
name="OpenPLI"
version="8xstar"
elif [[ "$input_file" == *"peterpan-"* ]]; then
name="PeterPan"
version="2.6"
else
name="Opendreambox"
version="2.6"
fi




# Determine the AIO TYPE based on the input file name
if [[ "$input_file" == *"-aio-"* ]]; then
aio="-AIO"
fi




# Get the directory where the script is located
script_dir="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"


# Create a temporary directory in the same folder as the script
temp_dir=$(mktemp -d "$script_dir/tempdir.XXXXXXXXXX")


# Function to create a folder if it doesn't exist
create_folder_if_not_exists() {
local folder="$1"
if [ ! -d "$folder" ]; then
echo "Creating folder: $folder"
mkdir -p "$folder"
fi
}


# Function to delete an existing folder
delete_existing_folder() {
local folder="$1"
if [ -d "$folder" ]; then
echo "Deleting existing folder: $folder"
rm -rf "$folder"
fi
}


# Extract the tar.xz file as a tar into the temporary directory
echo "Extracting $input_file in a temporary directory..."
tar -xf "$input_file" -C "$temp_dir"


# create Multiboot Imagename
echo "${name} ${version}${aio} \n \l" > ${temp_dir}/etc/issue
echo "\n \l" >> ${temp_dir}/etc/issue


for folder_name in "${folder_names[@]}"; do
delete_existing_folder "$folder_name"
create_folder_if_not_exists "$folder_name"
echo "copy $temp_dir/boot/Image.gz-4.9 to $folder_name/kernel.bin"
cp "$temp_dir/boot/Image.gz-4.9" "$folder_name/kernel.bin"
echo "Creating imageversion file in $folder_name..."
echo "$input_file" > "$folder_name/imageversion"
done


# Repack the extracted content as tar.bz2
echo "Repacking extracted content as rootfs.tar.bz2..."
tar -cjf "$script_dir/rootfs.tar.bz2" -C "$temp_dir" .


# Move the tar.bz2 file to each folder
for folder_name in "${folder_names[@]}"; do
# Copy the repacked tar.bz2 file to the folder
echo "Copying rootfs.tar.bz2 to $folder_name..."
cp "$script_dir/rootfs.tar.bz2" "$folder_name/rootfs.tar.bz2"




# Get the base name of the input file (without path)
base_filename=$(basename "$input_file")


# Zip each folder with the full input filename
output_zip="${base_filename%.tar.xz}_${folder_name}.zip"
echo "Zipping $folder_name to $output_zip..."
zip -r "$output_zip" "$folder_name"
delete_existing_folder "$folder_name"
if [ $? -eq 0 ]; then
echo "Task completed successfully for $folder_name. Output saved as $output_zip"
else
echo "Failed to create the zip file for $folder_name."
fi
done


# Clean up the temporary directory
rm "$script_dir/rootfs.tar.bz2"
rm -rf "$temp_dir"

Display More

You need to run the script on the command line with the exact name of the image file (Usage: $0 <input_tar.xz>)

TS

Display More

May you please Mr Toysoft show the way step by step and if there is an example so we learn ?