OpenATV 7.6 – Discussion & New Features

There are 1,057 replies in this Thread which was already clicked 251,856 times. The last Post () by haldborg.

  • DNS için bir kontrol betiği sağladım. Ne yapılandırdığınızı kimse bilmediği için, kimse size yardımcı olamaz. Normalde standart imajı yükleyip test edersiniz; VPN etkinse, test için kapatmanız gerekir.

    Hello captain I upgraded to openatv 7.6 I encountered a problem in openwebif application. There are 3 icons below the channels on webif. There is an epg tv icon and a phone icon. In the previous version when I clicked on the tv icon it would download as an m3u file to the desktop of my computer. However in 7.6 when I click on the tv icon it tries to open in the browser but it does not download to the desktop. I disable the play in browser option in webif application but it does not help. Can you help me?

  • all feed online and working, check local dns, you use vpn disable and check again

    feed online with ipv4 and ipv6


    here a small test

    wget -O /tmp/feeds-check.sh "http://source.mynonpublic.com/feeds-check.sh" && chmod 777 /tmp/feeds-check.sh && /tmp/feeds-check.sh

    hmm, my test
    capture_001_27102025_182136.png


    My friend, honestly, I’ve grown to to hate; this image and all its problems. Even after changing the DNS, the issues never end.

    The feed doesn’t work, and it doesn’t have the required packages to install different plugins.

    I don’t know what’s going on with it, and the team doesn’t seem to care.

    I’ve said it over and over again — this image has become miserable.



  • The problems with the image and the feed occur only on Dreambox devices, while everything works fine on other devices.

    It’s unbelievable that updating the image online requires about 30 attempts before it finally works.


  • Even after testing, there’s still a problem with the feed.



    2025-10-27_205529.jpg

  • Code
    root@dm920:~#  wget -O /tmp/feeds-check.sh "http://source.mynonpublic.com/feeds-check.sh" && chmod 777 /tmp/feeds-check.sh && /tmp/feeds-check.sh
    --2025-10-27 21:00:18--  http://source.mynonpublic.com/feeds-check.sh
    Resolving source.mynonpublic.com... failed: Name or service not known.
    wget: unable to resolve host address ‘source.mynonpublic.com’
    root@dm920:~#



    830.jpg    2025-10-27_210245.jpg

  • Code
    root@dm920:~#  wget -O /tmp/feeds-check.sh "http://source.mynonpublic.com/feeds-check.sh" && chmod 777 /tmp/feeds-check.sh && /tmp/feeds-check.sh
    --2025-10-27 21:00:18--  http://source.mynonpublic.com/feeds-check.sh
    Resolving source.mynonpublic.com... failed: Name or service not known.
    wget: unable to resolve host address ‘source.mynonpublic.com’
    root@dm920:~#



    830.jpg    2025-10-27_210245.jpg

    My friend, you are having trouble with Open TV 7.6. Change to another image and test. It's very simple, try the one that works properly for you.


  • On the Black Hole image, everything is activated and working perfectly.

    After trying more than 20 DNS servers, the only one work was this one. ( 8.8.8.8 ; 1.0.0.1 )


    Finally, (iptv6 OFF) with default setting



    2025-10-27_234129.jpg

  • The OA-Weather 2.1 plugin crashes when I press the OK (View details) button.

    Code
    10:51:15.2644   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 277, in action
    10:51:15.2648   File "/usr/lib/enigma2/python/Plugins/Extensions/OAWeather/plugin.py", line 433, in keyOk
    10:51:15.2654 IndexError: list index out of range
    10:51:15.2667 [ePyObject] (PyObject_CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap object at 0x6c556768>>,('OAWeatherActions', 'ok')) failed)
  • Captain

    In tuners VU Duo4KSE i Novaler 4kSE there is a problem with the IP Audio Pro application, restart the system.

    In system 7.6 beta, this problem did not exist. Can you fix it? Do you need any data from the receiver in the system?

  • Hello, when I use my VPN, Proton, the image freezes within seconds and I have to restart the device... Thank you for your work...

    what device vpn i,e, openvpn or wireguard perhaps check vpn log to see if any info or check on vpn plugin section to see if any other proton users with problem.

  • hi all

    for some reasons i can't install these openatv py3 images .

    it does install but when the box reboot it just stuck in reboot and then blue screen with log error report and start rebooting again ....

    i am on pure2 at the moment. but i do miss the openatv image.

    is there any images ending with tar.xz. etc...so i can download is straight into the dreambox firmware.

    by the way my box is dreambox dm900

    thanks for your help folks

    :cool1:

  • where are you downloading from is this dm900

    not correct images for your device


    but I do not have a DM device but do you not also need ChkRoot Multiboot

  • is there any images ending with tar.xz. etc...so i can download is straight into the dreambox firmware.

    by the way my box is dreambox dm900

    Firmware ending in

    tar.gz
    tar.bz2

    tar.xz

    can be used to flash your dm900


    Unzip "openatv-7.6.0-dm900-......._mmc.zip"

    The extracted folder contains the file "rootfs.tar.bz2" to flash your dm900


    If you want to rename rootfs you can rename it to whatever you want, but do not rename ending tar.bz2

  • hi

    thanks for your help.

    just to clarify something i have been downloading images to the box for the last 10years

    i use the dreambox interface or flash online from the image its self.

    as i said when i dowload the image it does say the image is downloded succesfuly but when the box reboot it does get stuck on rebooting mode suddenly a blue screen pops up with error logs and then it reboot again.....

    never seen or heard such fault and that's only hapen with OPENATV 7.6 the previous ones py2 are fine any other image is fine now i am using pure2 at the moment.

    thanks

    :cool1:

  • Maybe something is corrupt on your dm900. First install last original firmware


    update your dm900 rescue/bootloader zImage-rescue-3.14-r0-dm900-20201201.bin

    Code
    wget http://www.dreamboxupdate.com/opendreambox/2.5/unstable/images/dm900/zImage-rescue-3.14-r0-dm900-20170113.bin
    flash-rescue zImage-rescue-3.14-r0-dm900-20201201.bin

    Edited 3 times, last by passata ().

  • 1* kernel


    You'll certainly have a kernel installed in Flesh that's different from the one the software you're installing requires.


    Firmware ending in

    tar.gz

    tar.bz2

    tar.xz


    Complete is fine.

    Now you've only sent the software, not its kernel. To change it, you only need a software that's ko. The DE is complete.


    So, you should first install the DE via the web. Then do a mini-tuning, stop on a free-to-air channel, put the decoder back in service mode, and send whatever you want.


    This DE software is the only one that has the kernel already installed.

    VuSolo_VuSOLO.PRO_VuZero_VuSOLO2 SE_DR.800sim japar ed 800SEsim a8p_Mutant 51_4k_GB.UE.4k_DM.920+900
    H9combo_H9.2H-SE_H7s_H2H_H5

OpenATV Team Images Support Forum ~ based on OE-Alliance

OpenATV Supported Models ~ Airdigital, Amiko, Anadol, Atemio, Atto, AX Technology, Axas, Beyonwiz, Dinobot, Dreambox, Edision, EVO, Ferguson, Formuler, Galaxy Innovations, Gigablue, Golden Interstar, HDBox, Hitube, James Donkey, IQON, Izibox, Jepssen, Maxdigital, Medialink, MaXytec, MediaArt, Megaset, Miraclebox, MK-Digital, Mut@nt, Novaler, Octagon, Odin, Optibox, Protek, PULSe, Qviart, Red-Eagle, Relook, Roxxs, SAB, Sezam, Sogno, Space, Spycat, Technomate, Telestar, Tiviar, T-Rex, Uclan, Venton Unibox, Vimastec, VisionNet, VU+, VUplus, World Vision, Vizyon, WWio, Xsarius, and Xtrend.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!